Avlink ADD-01W User Manual
AUDIO DELAY
Conversion Box
ADD-01W
USER MANUAL V1.0
ADD-01W
Package Contents-
1 ADD-01W Unit
1 User manual
1 Power adapter DC 12V
2 Screws
4 foot pads
1 RCA cable 1.2M
Any thing missed, please contact with your vendor.
Introduction
The ADD-01W connects to the analog and digital audio
signal from your source equipment (DVD player, satellite,
cable… etc.) to your AV receiver.
With the simple interface of ADD-01W, the audio delay
time can be adjusted so that sound and picture are
perfectly synchronized. Up to 2700ms (2.7 second) error
can be corrected. The digital audio signal is reproduced
bit-perfect so no loss of audio quality is incurred.
Also the ADD-01W can convert the audio from analog to
digital, or from digital to analog with a simple select button.
Features
Max Audio Delay time 2.7 second is sported with all
the sample rate. (32K / 44.1K/ 48K / 96K / 192KHz)
Audio delay adjustment scale is 10ms.
Supports 2-channel linear PCM digital audio
Supports compressed audio format signal, when select
digital audio input Î digital audio output.
Analog to Digital audio and Digital to Analog audio
conversion. (only support 2-channel Linear PCM)
Supports CD, DVD, and Blue-Ray sample rates (32K /
44.1K/ 48K / 96K / 192KHz)
Specifications
Input
connector
Connector
Audio Input support
sample rate
Audio output support
sample rate
Power Adapter (Min.) DC 12V with lock
Housing Metal
Dimensions (LxWxH) 150x92x25mm
Analog 2 x RCA
Coaxial(SPDIF) 1 x RCA
Analog 2 x RCA Output
Coaxial(SPDIF) 1 x RCA
32K / 44.1K/ 48K
/ 96K / 192KHz
32K / 44.1K/ 48K
/ 96K / 192KHz
Weight 305g
-1-
TOP VIEW
c
d
e
f
1. Select Analog Input Sample Rate
2. Display current audio delay time
3. Indicate current audio input (Coaxial / analog)
4. Select audio input (Coaxial / analog)
5. CHG: change time unit to adjust the audio delay time.
(second/ 100ms / 10ms)
6. + : increase time delay value
7. - : decrease time delay value
h gi
-2-
FRONT VIEW
c
1. Input Power Jack
2. Digital Input port
3. Analog Input port
d
e
REAR VIEW
c
1. Analog output port
2. Digital output port
3. RS232 port
d
e
Installation
1. Connect input equipment source to ADD-01W.
2. Connect ADD-01W to output device. (e.g. speaker).
3. Connect the power cord and turn on the ADD-01W.
4. Turn on the source device.
-3-
Operation
Setting the audio delay time
1. Select the time unit to adjust by pressing the button
“CHG”.
2. Then the selected time unit LED will keep flash. The
user can change to the next time unit by pressing “CHG”.
Second => 100ms => 10ms => Second…
Adjust “second”
1. Pressing button “CHG” to select time unit “second” to
change.
“Second” LED flash.
2. Pressing button “-” once to decrease 1 to 0.
3. Pressing button “CHG” to select time unit “100ms” to
change.
Adjust “100 ms”
4. Pressing button “+” three times to increase 2 to 5.
3. Pressing the “+” or “-“ to increase /decrease the value
5. Stop operation and wait several second the LED stop
flashing, then the new audio delay time will take effect.
6. “+” and “-“ can reset LED at the same time
Adjust “10 ms”
Old delay value 1.20 sec
Time unit to change: 100ms
“+” increase value from 2 to 3
“-” decrease value from 2 to 1
5. Stop operation and wait the LED stop flashing, then the
new audio delay time “0.50” second take effect.
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
Example:
Audio delay “1.20” second change to “0.50” second
Old audio delay time “1.20” second
-4-
-5-
Loading...