AV Link 120.215UK, 120.216UK User Manual

120.215UK User Manual

Rechargeable DAB+ Radio with Bluetooth

Deco

Item ref: 120.215UK Dark Wood, 120.216UK Light Wood

User Manual

Tune into wireless sound with this compact DAB+ radio with classic, wooden styling. Stream music via
Bluetooth straight from smart devices, use the USB and Micro SD ports or simply listen to high quality DAB+,
DAB and FM stations and store your 20 favourite presets. The ultra-clear, full colour screen displays station
information with a DAB slideshow. Perfect to use anywhere at home thanks to the inbuilt rechargeable
battery, providing up to 10 hours play time from a single charge and preserve battery life using the sleep
timer function.

• Compact and stylish Digital DAB+/DAB/FM radio that fits anywhere in your home

• Stream your own music collection from your smart devices wirelessly via Bluetooth

• Take your Deco wherever you go with the inbuilt 2000mAh rechargeable battery

• Full colour display with DAB slideshow

• Added multimedia functionality via the rear USB and Micro SD ports

• 10 Presets on both DAB and FM frequencies and sleep timer function

Technical Specifications and Features

DAB Frequency range

174 – 240 MHz DAB and DAB+

FM Frequency range

87.5-108MHz

USB Power

5V 1A

Battery

2000mAH Lithium rechargeable (built-in)

Audio output

3W RMS

Bluetooth version

V4.0+EDR

Bluetooth range

Up to 10m (in clear line of sight)

Battery life

Up to 10 hours from a single charge

Input connections

Bluetooth, 3.5mm (Aux), USB, Micro SD

Dimensions

185 x 115 x 110 mm (W x H x D)

Weight

950g

Controls Diagram:

120.215UK User Manual

Unit Controls and Features

1. Power/mode button: Short-press to power on and long-press to power off. When the radio is on, short-

press to enter the Mode screen, then turn the Tune/Select button to select your desired mode and press
to select.

2. Info/menu button: Short-press repeatedly to switch between information messages broadcast by the

selected channel provider. Long-press to enter the main menu for features and settings.

3. Scan button: Press to scan for stations in either DAB+ or FM mode.

4. Previous track/station button: In DAB or FM radio modes, press to select the previous station or in

Bluetooth or multimedia modes, press to select the previous track.

5. Play/pause button: In Bluetooth or multimedia modes, press to play or pause the current track.

6. Next track/station button: In DAB or FM radio modes, press to select the next station or in Bluetooth

or multimedia modes, press to select the next track.

7. Tune/select knob: In the mode screen, rotate to navigate around the menu. In DAB radio mode, rotate

to select the previous or next station or in FM mode, rotate to fine tune. Press to confirm your selection
during any operation.

8. Volume knob: Rotate to adjust the volume level up or down.

9. 2.4” LCD colour display: Displays current station information, menus and settings screens.

10. Speaker: 3W RMS output.

11. Telescopic Aerial: Extend and direct to improve radio reception.

12. AUX in jack: Use to connect to audio output devices with a compatible 3.5mm lead (not supplied).

13. USB port: Multimedia playback via a USB flash drive or other compatible USB device.

14. LED charging indicator: Glows red when the unit is connected to a compatible USB power source and in

charging mode.

15. Reset aperture: Press using a pin or needle to reset the unit when required.

16. Micro SD/TF slot: Multimedia playback via a micro SD or TF card.

17. DC in 5V micro USB port: Use the charging cable supplied and connect to a compatible USB power

source for charging or constant power.

General Usage

• Charging the battery: Fully charge the radio’s internal battery before first use. Use the USB cable

provided and only connect to a suitable 5V USB power supply. To check the battery capacity at any time,

view the battery level indicator on the top of the display panel. When battery power is low, the

message “Battery Low” will appear on the display panel, indicating that the battery needs recharging as
soon as possible. During charging, the battery level indicator will flash, changing to constant when

fully charged. Note: If the radio is used while connected to a USB power source, the indicator will always
flash, even when the unit is fully charged.

• Switching on: Press the Power/mode button to switch the unit on and it will

enter the mode selection screen (see opposite). Select your desired mode by
scrolling through the icons using the Tune/select knob, then press to confirm.

• DAB+ mode: On first use, the radio will perform a full scan (see opposite). On

completion, the first station in the stored channel list will be played and its name
shown on the display screen. To navigate between the stored channels, press
either the Previous track/station or Next track/station buttons repeatedly
until you find the channel of your choice or rotate the Tune/select knob and
press to confirm your selection.

• FM mode: In FM mode, press the Scan button to perform a channel scan where

the Deco will automatically search and save the strongest available stations in your preset menu. To fine
tune or perform a manual search use the Tune/select knob until you reach the desired station.