Model : SC101
Specifications SC101
Before Use
Precautions……………………………….... 1
Scale Components………………………... 2
Error Displays..…………………………..... 3
Installing(or Replacing) Batteries …….... 4
Operations
Measurement weight……….………………6
Wireless connection…………….………… 8
References
Specifications……………………………… 9
Maintaining the Scale……………..……... 9
FCC Staeeme nt..... . ...... . ...... . ....... ......1 0
Read Before Use
Type BF Applied Part
Precautions
!Please read this booklet before using your scale.
!Do not place your scale on a soft, wet or sli ppery
floor.It is recommended that the sca le be used on
a solid level surface, such as tile, wood, or
laminate flooring.
!Place your scale on a solid level flooring surface.
Your sc ale cont ains del icate, h igh-pr ecisio n
parts. Avoid extremes in the temperature,
humidity, direct sunlight,shock , moisture and
dust.
!Do not disassemble repair, or remodel the scale.
!Do not step o nto your scale with wet feet . Make
certain that feet a re dry to pr event sl ipping o r
serious injury.
!Do not step o n the edge.
!Do not place feet on th e display window.
1
Indications for use
!This scale is designed for indoor use to measure
the weight.
Scale components
Disp la y
Bluetooth
Slide Mod
Fron t
RESET
KG/L
Back
2
!The following measurement can be selected by
slide switch and are classified into two
categories WEIG HT MODE an d WEIGHT
CONNECTION MODE , you have c hoice to
select and have your weight displayed in KG or
LB.
!The scale has an “automatic- power-off”
functio n to turn off in about sixty seconds after
non-operation.
Error Display
Low batte ry ma rk
(Replace the batteries
with new ones)
3
Your w eig ht is o ver loa d
Installing (or Replacing) Batteries
Caution :
!Insert th e batter y with the p ositiv e (+) and
negative (-) term inals properly aligned with the
corresponding symbols in the battery
compartment.
!Improper installation of the batteries may
cause battery leakage.
!Replace all four batteries with new ones, when
“Lo” symb ol is disp layed.
!Do not mix used and new batteries. It may
result in damage to the scale or shorten battery
life.
!The batte ry life is d ependant upon the
environmental temperature, battery ty pe and
usage.
!Remove the batteries from the batte ry
compartment, when the scale is not to b e used
for a long time. They may leak and damage
your scale.
!Discard waste batteries according to the local
law.
4
Steps for Installing (or Replacing) Batteries
1. Remove the battery
compartment cover on
the underside of the
scale by gently pushing
on the arrow and lifting
the cover backward.
2. Place four new batteries
with the positive (+) and
negative (-) terminals
properly aligned with the
corresponding symbols
in the battery compartment.
3. Replace the cover by sliding
it into the compartment and
gently pressing into place.
5
Measurement Weight
Measurement Your Weight
1. Slide switch to correct
Mode Example
A: Set the slide switch to
“BLUETOOTH ON”, Tap
on the scale,the scale
will calibrate and display
. Bluetooth indicator
light to flash, Means
Bluetooth connection is
open. (Concrete
operation please look at in
wireless connection)
B. Set the slide switch to
“BLUETOOTH OFF”,Tap
on the scale, the scale ill
calibrate and display .
Bluetooth indicator light
is power-off, This is
measurement weight
only All display segments
are visible for three
seconds.
Wait until 0.00 is displayed.
(The display show
0.00kg/0.00lb)
6
Step on the scale and position
your feet in a manner that will
distribute your weight evenly
over the entire sca le platform.
The LCD display will flash two
times, th en the dis play will
show your weight. Stand sti ll
while reading the display.
Now you ste p off the scale,
the display will show
0.00kg/0.00lb,You c an
measurement your weight
again.
(Cautio n: If you re main sta nding on t he scale
or step off t he scale w ithout s ixty sec onds aft er
your weig ht has dis played a nd then tu rn off
automatically ).
7
Wireless Connection
1. Turn the Scale to the back side.
2. Turn on the bluetooth switch (From “0” to “1”),
while the device is performing an inquiry to find
other devices to which to connect, the LED on
the front side of the Scale will be quickly flashing.
When the device connects successfully to health
Monitoring devices, such as a computer or a
mobile phone, the LED is keeping on shining. At
the end of the measurement, your Scale will be
sent to your health monitoring device.
3.To disconnect from health monitoring devices,
turn off the bluetooth switch (From “1” to “0”),
then the LED will stop shining.
RESET
Bluetooth
Slide Mod
Back
KG/L
8
Specifications SC101
Digital display Liquid crystal display,
38mm character height
Maximum capacity 200kg/440lb
Minimum display 0.05kg/0.11lb
Bluetooth connection BlueMod+B20 (
Stollmann E+V GMB H))
Power source Four type AAA
batteries (1.5 volt X 4, includ ed)
Battery l ife Approximately 1000
Operation Environment
Storage & Transportation
Environment
Specifications are subjects to change without
prior notice and any obligation on the part of the
manufacturer.
Measurements
5℃~35℃,30~85%RH
-20℃~60℃,10~95%RH
Maintaining the scale
□ Clean the scale with a dry, soft cloth or a
cloth moistened with water and a mild
detergent. Never use alcohol, benzene,
thinner or other harsh chemicals to clean
the scale.
□ Remo ve the bat teries , if the sca le is not
going to be used for a long time.
9
FCC Statement
FCC Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate this equipment.
This device complies with Part 15 of th e FCC
Rules. Op eration is subject to the fo llowing two
conditions: (1) This device may not cause harmful
interference, and (2) this device must acce pt any
interference received, including interference that
may cause undesired operation.
This device and its antenna(s) must not be colocated or operating in conjunction with any other
antenna or transmitter.
10
EC REP
EU Representative:
Gold en Star Co mpu ter ( UK) L td. ,
Unit 39, Ra inbow Industrial Estate,
Tro ut Ro ad, West Dra yto n,
Middx. UB7, 7R N, United Kingdom
AViTA Corporation
9F, No.7 8, Se c.1 , Kwa ng- Fu Rd .,
San-Chung, Taipei C oun ty,
Taiwan
No.28 Xinyang Road,
Economic Development Zone,
Yangz hou C ity, Jia ngs u Pro vin ce,
China 225009
Loading...