Avipas AV-1361 User Manual
Model: AV-1361
HD IP Video Conference Camera
User Manual
V1.1
Please Read this User Manual throughout before using.
www.avipas.com
1
Attentions
Electric Safety
Installation and operation must accord with electric safety standard.
Caution to transport
Avoid stress, vibration and soakage in transport, storage and installation.
Polarity of power supply
The power supply of the product is ±12V, the max electrical current is 2A .Polarity of the power supply
drawing.
Careful of installation
Never move the camera by seizing the camera head. Don’t rotate camera head by hand; otherwise,
mechanical trouble will occur.
This series item must put on the smooth desk or platform, and it cannot be installed slant ways.
If the camera is installed on TV or computer, the base can be fixed by four double-sided adhesive trays.
Don’t apply in corrosive liquid, gas or solid environment to avoid the cover which is made up of organic
material.
To make sure no obstacle in rotation range.
Never power on before installation is completed.
Don’t disassemble discretionarily.
We are not responsible for any unauthorized modification or dismantling.
Attention
Electromagnetic filed under certain rate may affect camera image!
2
Warranty
Thank you for your interest in the products of AVIPAS Inc.
This Limited Warranty applies to HD Conference Camera purchased from AVIPAS Inc.
This Limited Warranty covers any defects in material under normal use during the Warranty Period.
During the Warranty Period, AVIPAS Inc. will repair or replace, at no charge and products that proves
defective because of improper material, under normal use and maintenance.
The Warranty Period for HD Conference Camera purchased from AVIPAS Inc. is Two year from the date
of purchase.
This Limited Warranty does not cover any problem that is caused by:
Conditions, malfunctions or damage not resulting from defects in material
To obtain warranty service, you must first contact us to determine the problem and the most
appropriate solution for you.
Contact Details:
AViPAS Inc.
Address: 4300 Stevens Creek Blvd. Suite 230
San Jose, CA 95129
Phone:
1-844-228-4727
Fax:
(408) 228-8438
Email:
info@avipas.com
Website: http://www.avipas.com
3
Content
1. Fast Installation ......................................................................................................................................................... 4
1.1 Camera Interface Explanation ........................................................................................................................ 4
1.2 Power on Initial Configuration ....................................................................................................................... 4
1.3 Video output .................................................................................................................................................... 4
1.4 BRACKET MOUNTING ............................................................................................................................... 5
2.Product overview ....................................................................................................................................................... 8
2.1 Product introduction ....................................................................................................................................... 8
2.2 Main Features ............................................................................................................................................... 10
2.3 Technical specification.................................................................................................................................. 11
2.4 Interface instruction ...................................................................................................................................... 12
3. Application Instruction ........................................................................................................................................... 16
3.1 Video Output ................................................................................................................................................. 16
3.2 Remote controller ......................................................................................................................................... 17
3.3 MENU SETTING ......................................................................................................................................... 19
4.Network Connection ................................................................................................................................................ 26
4.1 Connecting Mode.......................................................................................................................................... 26
4.2 IE Log In ....................................................................................................................................................... 29
5.Serial Communication Control ................................................................................................................................ 37
5.1 VISCA protocol list ...................................................................................................................................... 37
5.2,Pelco-D protocol command list .................................................................................................................... 43
5.3 Pelco-P protocol command list ..................................................................................................................... 44
6. Camera Maintenance and Troubleshooting ............................................................................................................ 45
6.1 Camera Maintenance .................................................................................................................................... 45
6.2 Troubleshooting ............................................................................................................................................ 45
4
1. Fast Installation
1.1 Camera Interface Explanation
Figure 1.1 AV-1361 series
1. Camera lens
2. Camera base
3. Remote Controller Receiver light
4. Bottom DIP switch
5. Tripod screw hole
6. Installation Orientation Hole
7. Rotary Switch: Video format select
8. RS232 control interface (input )
9. RS232 control interface (output )
10. RS485 input (left +,right-)
11. Audio Input interface
12. HD-SDI interface
13. DVI-I interface(including HDMI signal)
14. 10/100M Network interface
15. DC12V Input Power Supply Socket
1.2 Power on Initial Configuration
1) Power on: connect DC12V power supply adapter with NO.15 showed in Figure1.1 .
2) initial configuration: Power on with power indicator light on and remote control receiver light
blinking,camera head moves from bottom left to the bottom,and then go to the HOME position
(intermediate position of both horizontal and vertical ),while the camera module stretches. When remote
control receiver light stops blinking,the self-checking is finished.
Note: If you set preset 0,when Power on initial configuration is completed,the camera automatically
moves to the preset 0 position.
1.3 Video output
AV-1361’s video outputs: LAN,DVI (HDMI) and 3G-SDI.
1) Video output from LAN.
a. Network cable connection port: AV-1361-No.14 in Figure1.1.
b. Webpage Login: open your browser and enter 192.168.5.163 in the address bar (factory default);
press Enter to enter into the login page; click on the “player is not installed,please download and
install!" and follow the installation steps for installation. Then enter the user name admin and
password admin (factory default); press Enter to enter into the preview page,users can carry out PTZ
5
control,video recording,playback,configuration and other operations.
2) DVI(HDMI) video output
a. DVI video cable connection: AV-1361 refer to No.13 in Figure1.1.
c. Connect the camera and the monitor via DVI video cable; video output is available after camera initial
configuration.
3) 3G-SDI video output
a. 3G-SDI video cable connection: AV-1361 refer to No.12 in Figure1.1.
b. Connect the camera and the monitor via 3G-SDI video cable; video output is available after camera
initial configuration.
1.4 BRACKET MOUNTING
1) Bracket installation steps
6
2) Upside-down installation steps
7
8
2.Product overview
2.1 Product introduction
2.1.1 Product model
Model NO.: AV-1361.
Model NO.X—XXX—XXX—XX
IR ---IR remote controller
WR---wireless remote controller
AV-1361---standard interface(optional 5G wifi function)
20x optical zoom lens
S---1080P60 downward compatibility
M---1080P30downward compatibility
Please refer to corresponding features in this manual.
5Gwifi is optional for AV-1361.
2.1.2 Dimension
9
Figure 2.2 AV 1361 Camera dimension
2.1.3 Accessory
When you unpack,check that all the supplied accessories are included:
Model NO.
AV-1361
Accessory
Standard
Power adapter 1piece
RS232 cable 1piece
User manual 1piece
Double-side glue shim 4pcs
Warranty card 1piece
Optional
IR Remote controller 1piece
Wireless controller 1piece
Cascade Cable 1piece
Wall mounting bracket
Upside-down mounting bracket
10
2.2 Main Features
2.2.1 Camera performance
This series camera offers perfect functions,superior performance and rich interfaces. The features include
advanced ISP processing algorithms to provide vivid images with a strong sense of depth,high resolution
and fantastic color rendition. It supports H.264/H.264+ encoding which makes motion video fluent and
clear even with less than ideal bandwidth conditions.
1)Superb high-definition image: It employs 1/2.8 inch high quality CMOS sensor. Resolution is up to
1920x1080 with frame rate up to 60 fps.
2) Leading Auto focus technology: Leading auto focus algorithm makes lens a fast,accurate and stable
auto-focusing.
3) Low noise and High SNR: Low Noise CMOS effectively ensure high SNR of camera video.
Advanced 2D/3D noise reduction technology is also used to further reduce the noise,while ensuring
image sharpness.
4)Quiet PTZ: By adopting high accuracy step driving motor mechanism,it works extremely quiet and
moves smoothly and very quickly to designated position.
5)Multi-Format Video Outputs: support DVI (HDMI),3G SDI, wired LAN and wireless LAN interfaces.
The 3G-SDI is available for 100m transmission at 1080p60 format.
6)Multiple remote controls: There is IR remoter and 2.4G wireless remote for options. The 2.4G
wireless remote controller will not be affected by angle,distance or IR interference. Support transparent
transmission function.
7)Low-power sleep function: Support low-power sleep/wake up,the consumption is lower than 500mW
under sleep mode
8)Support Multiple Control Protocol: Support VISCA,PELCO-D,PELCO-P protocols which can also be
automatically recognized. Support VISCA control protocol through IP port.
9)RS-232 cascade function: AV-1361 series support RS-232 cascade function which is convenient for
installing.
10)255 presets positions: Up to 255 presets (10 presets by remoter).
11)Wide application:
tele-education
lecture capture
Webcasting
Videoconferencing
Tele-training
Tele-medicine
Interrogation and Emergency command systems
2.2.2 Network performance
1)Audio Input Interface: Support 16000,32000,44100,48000 sampling frequency and AAC,MP3,PCM
audio coding.
2)Multiple Audio/Video compression: Support H.264/H.265 video compression; AAC,MP3 and PCM
audio compression; Support compression of resolution up to 1920x1080 with frame up to 60 fps and 2
channel 1920x1080p with 30 fps compression.
3)Multiple network protocol: Support ONVIF,RTSP,RTMP protocols and RTMP push mode,easy to link
11
streaming media server (Wowza,FMS).
4)5G WI-FI function:If the product contains 5G wi-fi module,you can set up a wireless wi-fi connection in
a webpage,the specific configuration described in detail on the page of web configuration.
2.3 Technical specification
Model
AV-1361
Camera Parameter
Optical Zoom
20X, f＝4.7～94mm
Sensor
1/2.8 inch high quality HD CMOS sensor
Effective Pixels
Video Format
16: 9 2.07 megapixel
1080P60/50/30/25/59.94/29.97;1080I60/50/59.94;720P60/50/30/25/59.94/29.97
View Angle
2.9°(tele)--55.4°(wide)
Digital Zoom
10X
Minimum Illumination
0.5Lux (F1.8, AGC ON)
DNR
2D & 3D DNR
White Balance
Auto / Manual/ One Push/ 3000K/ 4000K/5000K/6500K
Focus
Auto/Manual
Aperture
Auto/Manual
Electronic Shutter
Auto/Manual
BLC
ON/OFF
WDR
OFF/ Dynamic level adjustment
Video Adjustment
Brightness,Color,Saturation, Contrast,Sharpness, B/W mode, Gamma curve
SNR
>55dB
Input/Output Interface
Video Interfaces
3G-SDI,DVI(HDMI), LAN
Image Code Stream
Dual stream output
Video Compression
Format
H.264, H.265
Control Signal Interfac
e
RS-232 Ring through RS232 output
Control Protocol
VISCA/Pelco-D/Pelco-P; Baud Rate: 115200/9600/4800/2400bps
Audio Input Interface
Double track 3.5mm linear input
Audio Compression
Format
AAC/MP3/PCM Audio compression
HD IP Interface
100M IP port(100BASE-TX), 5G WiFi (optional), Support Visca protocol control
through IP port
Network Protocol
RTSP/RTMP, ONVIF
Power Interface
HEC3800 outlet (DC12V)
12
PTZ Parameter
Pan Rotation
±170°
Tilt Rotation
-30°～+90°
Pan Control Speed
0.1 -100°/sec
Tilt Control Speed
0.1-40°/sec
Preset Speed
Pan: 100°/sec,Tilt: 40°/sec
Preset Number
255 presets (10 presets by remote controller)
Other Parameter
Supply Adapter
AC110V-AC220V to DC12V/1.5A
Input Voltage
DC12V±10%
Input Current
1A(Max)
Consumption
12W (Max)
Store Temperature
-10℃～+60℃
Store Humidity
20% - 95%
Working Temperature
-10℃～+50℃
Dimension
258mmX172mmX168mm
Weight
1.54KG
Remote Operation (IP)
Remote Upgrade,Reboot and Reset
Accessory
power supply, RS232 control cable, remoter,manual,warranty card
2.4 Interface instruction
2.4.1 External Interface
External interface of AV-1361 models: Rotary switch,RS232 input output,RS485 input,audio input,3G-SDI
output,DVI（HDMI）output,LAN,DC12V power interface.
Figure 2.3 AV-1361 model external interface diagram
13
2.4.2 Bottom DIP Switch
AV-1361 model Bottom DIP Switch diagram shown in Figure 2.4.
Figure 2.4 Bottom DIP Switch diagram
AV-1361 model two DIP switches are set to ON or OFF to select different modes of operation as shown in
Table 2.2.
Table 2.2 DIP Switch setting
2.4.3 Rotary DIP Switch
Sixteen rotary DIP 0-F interface diagram shown in Figure 2.5.
Sixteen rotary DIP 0-F corresponding to the video format as shown in Table 2.3.
Note: AV-1361 model have rotary DIP.
No.
SW2
SW1
Explanation
1
OFF
OFF
Software upgrade mode
2
ON
ON
Working mode
14
Figure 2.5 Rotary Dial diagram
Table 2.3 Rotary Dial corresponding to the video formats
Dial-up
video format
Dial-up
video format
0
1080P60 8 720P30
1
1080P50 9 720P25
2
1080I60
A
1080P59.94
3
1080I50
B
1080I59.94
4
720P60
C
720P59.94
5
720P50
D
1080P29.97
6
1080P30
E
720P29.97
7
1080P25
F
Display the video
format set on the
menu
Note:
1)After switching DIP,you need to restart the camera to take effect.
2)Only when the rotary dial code is F,the video format is displayed on the menu item.
3)Rotary switch setting is 0-E, rotary switch setting decides video format.
2.4.4 RS-232 interface
1)AV-1361 model RS-232C interface specification as shown below
Computer or keyboard and camera connection method
Camera
WindowsDB-9
1.DTR
1.DCD
2.DSR
2.RXD
3.TXD
3.TXD
4.GND
4.DTR
5.RXD
5.GND
6.GND
6.DSR
7.IR OUT
7.RTS
8.NC
8.CTS
9.RI
2)RS-232 Mini-DIN 8-pin Port Definition
Loading...