Aviom SB4 User Manual
DATA SHEET
System Bridge
SB4
The SB4 System Bridge can be used to combine up
to four Pro16® or Pro16e™ A-Net® streams onto a
single Cat-5 cable. The rear panel of the SB4 has four
A-Net input or output jacks; the front panel features
a single A-Net Bridge output. All connections utilize
heavy duty locking Neutrik® EtherCon® Cat-5 jacks.
Used in conjunction with the D800 A-Net Distributor,
the SB4 System Bridge combines up to four synchronous Pro16 A-Net streams for use with A360 Personal
Mixers. Designed for use with Pro16 A-Net cards for
digital consoles, the SB4 System Bridge brings the
number of input sources available to A360 personal
mixing systems from the digital domain to 64.
The SB4 may also be used in pairs to simplify cabling
in Pro16 digital snake systems. Up to four Pro16 input
or output devices are connected to an SB4 at the
stage and FOH locations, and the main Cat-5 cable run
between the stage and FOH mix position is reduced
to a single Cat-5 cable. Used in this manner, the SB4
supports congurations up to 64x0, 48x16, or 32x32.
PRODUCT HIGHLIGHTS
Four heavy-duty locking Neutrik EtherCon •
connectors on the rear panel
One EtherCon connector for the A-Net Bridge •
output (front panel)
Pro16 and Pro16e compatible•
Requires no power supply•
Multiple SB4 units can be used to create •
complex systems
SB4 SyStem Bridge SpecificationS
A-Net Input/
Output, re ar panel
A-Net Bridge Out,
front panel
Dimensions 1U high x 19” (482.6mm) wide x 1.25” (31.75mm)
Weigh t 1.0 lb (.45 kg)
Four EtherC on RJ 45 conne ctor
One Eth erCon RJ45 connector
deep
Aviom, A‑Net , the A‑Net i con, Pro16, Pro16e, Pr o64, Vir tual Da ta Cable s, Netwo rk MixB ack are tr ademar ks of Aviom, In c. All oth er trade marks ar e the pro pert y of thei r
respe ctive ow ners. ©2013 Aviom, In c. All ri ghts re serve d. Informa tion subj ect to c hange with out noti ce.
1157 Phoenixville Pike, Suite 201 • West Chester, PA 19380
Voice: +1 610.738.9005 • Fax: +1 610.738.9950 • www.Aviom.com
rev. 1.0 090413
Loading...