DATA SHEET
ASI
A-Net Systems Interface
The ASI A-Net® Systems Interface provides
a digital link between Pro64® Series
networking products and Pro16® Series
output devices, such as the A-16II and
A-16R Personal Mixers and the AN-16/o
and AV-P2 Output Modules. The ASI features two bidirectional Pro64 network
ports and four Pro16 A-Net outputs, all
using heavy-duty locking Neutrik® Eth-
corresponding Pro16 ports, reformatted for compatibility with Pro16 Series
devices. The number of available channels and valid Pro16 ports is determined
by the sample rate of the Pro64 network,
with 64 channels at 44.1/48kHz±, 32 at
96kHz±, and 16 at 192kHz±. Stereo link
settings from the Pro64 network are
passed to the Pro16 outputs.
erCon® connectors.
Pro16 A-Net outputs can be connected
Setup of the ASI is fully plug-and-play.
The module divides the incoming Pro64
A-Net network stream into 16-chan nel
blocks which are transmitted out the
PRO64 NETWORK PRO16 NETWORK
Sample Rate
44.1kHz 64 44.1kHz X X X X
48kHz 64 48kHz X X X X
88.2kHz 32 44.1kHz X X
96kHz 32 48kHz X X
176.4 kHz 16 44.1k Hz X
192k Hz 16 48 kHz X
Tot al
Channels
Sample
Rate
directly to the A-16II or A-16R Personal
Mixer, a Pro16 A-Net Distributor, or
a Pro16 Output Module such as the
AN-16/o or AV-P2.
Available O utputs
1-16 17-32 33- 48 49- 64
PRODUCT HIGHLIGHTS
Allows Pro64 audio networks to•
connect to Pro16 Personal Mixers,
Output Modules, and Distributors
Four 16-channel Pro16 A-Net outputs, •
derived from Pro64 network channels
1-16, 17-32, 33-48, and 49-64
Two Pro64 A-Net network ports•
Supports all Pro64 sample rates•
Internal universal power supply; •
IEC power connector
TECHNICAL SPECIFICATIONS
LED Indicators Pro64 Sample Rate
Pro64 A-Net 2 EtherCon R J45 connectors, rear panel
Pro16 A-Net Output 4 EtherCon R J45 connectors, rear panel
Pro64 Sample Rates 39.7–52kHz; 79.4–104kHz; 158.8–208kHz 24-bit resolution
Pro16 Sample Rate 39.7–52kHz 24-bit resolution
Latency Analog in (Pro 64) to analog out (Pro16): <1ms
Power Supply 100–240VAC 50– 60Hz, 24W
Dimensions 1U; 19”w x 8”d x 1.75”h (482.6 x 203 x 44 mm)
Weight 5.5 pounds (2.49 kg)
Voice: +1 610.738.9005 • Fax: +1 610.738.9950 • ww w.Aviom.com
Pro16 Available Outputs
Internal switching type; IEC connector
All Aviom prod ucts are designed and ma nufactured in the USA.
1157 Phoenixville Pike, Suite 201 • West Chester, PA 19380
ASI
A-Net Systems Interface
FRONT PANEL FEATURES S
Auto/Manual Mode indicator LEDs ▪
Pro64 Sample Rate indicator LEDs ▪
Pro16 Available Outputs indicator LEDs ▪
ASI BLOCK DIAGRAM (3 SAMPLE RATE RANGES)
to/from
network
Pro64
A-Net
Sample rate
converter
(to 48kHz)
REAR PANEL FEATURES
T
Dual Pro64 A-Net ports ▪
Four Pro16 A-Net Outputs ▪
(channels 1-16, 17-32, 33-48, 49-64)
1-16
Pro16
A-Net
17-32 (44.1/48, 88.2/96 only)
33-48 (44.1/48 only)
49-64 (44.1/48 only)
User
Config.
Settings
ARCHITECTURAL SPECIFICATION
The Aviom ASI A-Net Systems Interface shall employ the Aviom A-Net® audio
transmission protocol to provide a interface between Pro64® networks and
Pro16® monitor mixing and audio distribution systems. It shall digitally
transmit full-bandwidth high-quality audio by employing the A-Net audio
transmission protocol.
The front panel shall provide LED indicators for Pro64 Sample Rate, Pro16
Available Outputs, Pro64 Network Mode, and Managed Mode. The rear panel
shall provide two EtherCon® RJ45 connectors for Pro64 A-Net connections
and four EtherCon RJ45 connectors for Pro16 A-Net outputs.
Aviom, A-Net , the A-Net ic on, Pro16, Pro6 4, and Virt ual Data Ca bles are t rademar ks of Aviom, Inc . All other t rademar ks are th e proper ty of the ir respe ctive owne rs.
©20 08 Aviom, Inc. A ll rights r eser ved. Informa tion subje ct to cha nge withou t notice. P/N 9303 0018 0001 rev. 3.4 101308
The unit sha ll output one, two, or fo ur 16-channel Pro16 A-Net stre ams, depending
on the number of channels available on the connected Pro64 network.
The unit sha ll be powered by an internal u niversal power suppl y (110 to 240VAC)
with an AC power re ceptacle with fuse, an d shall be supplied with a detachabl e
AC cable. It shall be UL and CE listed.
Its dimensions shall be 19 inches wide, 8 inches deep, and 1U (1.75”) high. Its
net weight shall be 5 pounds, and its front panel shall be finished in blue. The
unit shall be Aviom Incorporated model ASI.