Aviom AN-16-O User Manual
AN-16/o v.4 Output Module Addendum
This document contains new and/or updated information which is not included in the current User Guide that ships with the
AN‑16/o v.4 Output Module. The AN‑16/o v.4 is fully compatible with all Pro16® products and can be connected to a Pro64® network
via the ASI A‑Net® Systems Interface.
AN-16/o v.4 Output Levels
The AN‑16/o v.4 offers four output levels, and is designed to work with devices that have either
line‑level or mic‑level audio inputs.
Three choices are available for the balanced line‑level outputs: +4dBu, +18dBu, and +24dBu. A
mic‑level output is provided for use when the AN‑16/o v.4 is being connected to a mic preamp
input, such as those found on a mixing console. The output level can be set per channel pair.
The labeling on the AN‑16/o v.4 front panel has also changed to reflect the different output
levels available.
AN-16/o v.4 Rear Panel Audio Connections
The rear panel of the AN‑16/o v.4 has two DB25 multi‑pin connectors that are wired to analog pinout standards. This allows easy
interfacing with a variety of audio equipment using readily‑available multi‑pin breakout cables or with Aviom PB28 Modular Patch
Bay products. Each DB25 jack carries eight balanced audio channel outputs.
AN-16/o v.4 Output Module Specifications
Audio Outputs
D/A C onversion
Operating Levels
Max. Ou tput L evel
Metering
Output Impedance
Freq. Response
THD +N
Crosstalk
Signal to Noise
(unweighted)
16 channels, balan ced
DB25 multipin connec tors (2), analog pinout
Impedanc e balance d output s (Mic, +4dBu, and
+18dBu); Dif ferential output (+24dBu)
48kHz, 24-bit
4-position s witch, p er channel pai r
+24, +18, +4dB u line- level or M ic level
+24 d Bu
LEDs; green: Signal Pres ent; re d: Clip; per ch annel
226 ohms (+18dBu, +24dBu);
100 ohms (+4dBu, Mic)
4Hz-22kHz +0.2dB/-3dB
< 0.004%
-90dB
92dB typical, A /D to D/A
Measured from AN-16/i Input Module to AN-16/o v.4
Output Module
Aviom, A-Net , the A-Net i con, Pr o16, Pro64, and Vi rtua l Data Cab les are t radema rks of Avi om, Inc. All o ther tr ademar ks are th e prope rt y of their r espec tive
owners . ©2008 Aviom, Inc . All rig hts re serve d. Informa tion sub ject to c hange wi thout no tice. P/N 9311 1021 0001F rev. 1.0 071808
1157 Phoenixville Pike, Suit e 201 • West Cheste r, PA 19380
Voice: +1 610.738.9005 • Fax: +1 610.738.9950 • www.Aviom.com
12
Bit Err or Rate (BER)
Digital
Connections
A-Net
Latency
Power Supply
Input Voltage
Output Voltage
Plug Size
Dimensions
Weigh t
Options
All Aviom products are designed and manufact ured in the USA .
-
10
A-Net In: 1; A-Net Out: 1; A-Net Expans ion: 1;
Neutr ik EtherCon connecto rs
A-Net Expansion allows 32 channel s of audio to be
transmi tted over one Cat-5e cable whe n using two
Input Modules and two Ou tput Mo dules
Uses un shiel ded Cat-5e UTP (or bet ter) cab le
0.620 msec (measured from analog input to anal og
output)
Exte rnal, DC, universal s witch ing ty pe
100-240 volts, 50/60Hz, 30VA
24 VDC, 0.5 amp
2 mm
19” (482.6 mm) wi de x 5.75” (146 mm) deep;
1U high
6.8 lb. (3.08 kg)
AN-16SBR System Bridge; used to combine up
to four A-Net s treams for trans missio n over one
Cat-5e cabl e
Loading...