Aviom 6416O User Manual

6416o v.2 Output Module Addendum

This document contains new and/or updated information that is not included in the current User Guide that ships with the 6416o
v.2 Output Module.

6416o v.2 Output Levels

Version 2 of the 6416o Output Module provides 16 balanced mic- or line-level XLR analog
outputs from a Pro64® A-Net® network. Each channel includes a four-position output level
switch (mic-level and +4, +18, or +24dBu line-level), and is designed to work with devices
that have either line-level or mic-level audio inputs.

Three choices are available for the balanced line-level outputs: +4dBu, +18dBu, and
+24dBu. Move the switch found above each channel’s activation button to the setting that
best matches the input sensitivity of the device receiving the line-level analog signal from
the 6416o v.2 in your application.

A mic-level output is provided for use when the 6416o v.2 is being connected to a mic preamp input, such as those found on a
mixing console. Mic level output can be set per channel by moving the switch found in each channel strip to the lowest setting.

The labeling on the 6416o v.2 front panel is also different from what is shown in the User Guide and reflects the different output
level choices available.

The 6416o v.2 is fully compatible with all Pro64® products and can be used in any combination with previous versions of the 6416o.

6416o v.2 Output Module Specifications

Channels 16 outputs Mic- or line-level

XLR Outputs Pin 1: Shield; Pin 2: H ot; Pin 3: Cold

Alt. Audio Outputs DB25 multipin; analog audio pinout

Output Impedance 200 ohms for Mic and +4dBu;

Output Levels +4dBu, +18dBu,

Max. Output Level

Sample Rates 1x: 39.7–52kHz;

Frequency
Response

THD +N < .002% at -10dBFS

Sign al to Nois e D/A: -111dB (unweighted)

Crosstalk <100dB at 1kHz

Impedance balanced for Mic, +4dBu , and +18dBu,
Signal on hot only; Full dierential for +24dBu

450 ohms for +18dBu and +24dBu

+24dBu, or Mic

+24dBu

2x: 79.4 –104kHz;
4x : 158 .8 –20 8kH z

-3dB: 2Hz and 23kHz
±0.5dB: 10Hz–22kHz (at 1x sample rate)

4-p osition switch p er
channel

24-bit resolution

Maximum Ambi ent
Temperature

Virtual Data Cables MIDI In, MIDI Out

A-Net 2 EtherCon® R J45 connectors

A-Net Cable Length 400 f eet (120 meters) between devices

Latency Analog input to analog output: <800µs

Power Supp ly 100 –240VAC 50–60Hz, 24W

Dimensions 2U; 19”w x 8”d x 3.5”h (482 .6 x 203 x 88 mm)

Weight 9 pounds (4.1 kg)

All Aviom prod ucts are designed and man ufactured in the USA.

50°C

5-pin DIN

RS -232
DB9 connector; DIP switch conguration

GPIO
In (x4), Out (x4); terminal block conn ectors;
DIP switch conguration; TTL or isolated

Internal switching type; IEC connector

Aviom, A‑Net , the A‑Net i con, Pr o16, Pro64, and Vi rtua l Data Cab les are t radem arks of Avi om, Inc. Al l other tr ademar ks are t he prop ert y of their r espe ctive
owners . ©2009 Aviom, Inc . All rig hts re serve d. Informa tion sub ject to c hange wi thout no tice. P/N 9311 1023 0001F rev. 1.0 020909

1157 Phoenixville Pike, Suite 201 • West Chester, PA 19380

Voice: +1 610.738.9005 • Fax: [phone] • www.Aviom.com