Avigilon 1.0-H3M-DC1, 1.0-H3M-DC1-BL, 2.0-H3M-DC1, 2.0-H3M-DC1-BL Installation Manual

InstallationGuide

Avigilon™ High Definition H.264 IP Micro Dome Camera Models:

1.0-H3M-DC1, 1.0-H3M-DC1-BL, 2.0-H3M-DC1 and 2.0-H3M-DC1­BL

Important Safety Information

This manual provides installation and operation information and precautions for the use of this camera. Incorrect
installation could cause an unexpected fault. Before installing this equipment read this manual carefully. Please
provide this manual to the owner of the equipment for future use.

The Warning symbol indicates the presence of dangerous voltage within and outside the product
enclosure that may constitute a risk of electric shock, serious injury or death to persons if proper
precautions are not followed.

The Caution symbol alerts the user to the presence of hazards that may cause minor or moderate injury
to persons, damage to property or damage to the product itself if proper precautions are not followed.

WARNING — Failure to observe the following instructions may result in severe injury or death.

l Installation must be performed by qualified personnel only, and must conform to all local codes.

l For indoor use only.

l This product is intended to be used in an Network Environment 0 per IEC TR62101. The camera is to be

connected only to PoE network that complies with IEEE 802.3af without routing to the outside plant.

CAUTION — Failure to observe the following instructions may result in injury or damage to the camera.

l Do not install near any heat sources such as radiators, heat registers, stoves, or other sources of heat.

l Do not subject the cables to excessive stress, heavy loads or pinching.

l Do not open or disassemble the device. There are no user serviceable parts.

l Refer all servicing to qualified personnel. Servicing may be required when the device has been damaged

(such as from a liquid spill or fallen objects), has been exposed to rain or moisture, does not operate
normally, or has been dropped.

l Do not use strong or abrasive detergents when cleaning the device body.

l Use only accessories recommended by Avigilon.

Regulatory Notices

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

i

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

l Reorient or relocate the receiving antenna.

l Increase the separation between the equipment and the receiver.

l Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

l Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications made to this equipment not expressly approved by Avigilon Corporation or parties
authorized by Avigilon Corporation could void the user’s authority to operate this equipment.

Disposal and Recycling Information

When this product has reached the end of its useful life, please dispose of it according to your local
environmental laws and guidelines.

Risk of fire, explosion, and burns. Do not disassemble, crush, heat above 100 °C (212 °F), or incinerate.

European Union:

This symbol means that according to local laws and regulations your product should be disposed of separately
from household waste. When this product reaches its end of life, take it to a collection point designated by local
authorities. Some collection points accept products for free. The separate collection and recycling of your
product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment.

Legal Notices

© 2014 Avigilon Corporation. All rights reserved. Unless expressly granted in writing, no license is granted with
respect to any copyright, industrial design, trademark, patent or other intellectual property rights of Avigilon
Corporation or its licensors.

AVIGILON is an unregistered and/or registered trademark of Avigilon Corporation in Canada and other
jurisdictions worldwide. Other product names mentioned herein may be the unregistered and/ or registered
trademarks of their respective owners. ™ and ® are not used in association with each trademark in this document.

ii

Disclaimer

This manual has been compiled and published covering the latest product descriptions and specifications. The
contents of this manual and the specifications of this product are subject to change without notice. Avigilon
reserves the right to make changes without notice in the specifications and materials contained herein and shall
not be responsible for any damages (including consequential) caused by reliance on the materials presented,
including but not limited to typographical and other errors relating to the publication.

Avigilon Corporation
http://www.avigilon.com

Revised: 2014-05-30

920-0111A

iii

Table of Contents

Overview 1

Shroud View 1

Side View 2

Front View 3

Cable Assembly 4

Installation 5

Camera Package Contents 5

Installation Steps 5

Preparing for the Installation 6

Connecting PoE 8

Mounting the Micro Dome Camera 9

Assigning an IP Address 10

Accessing the Live VideoStream 10

Aiming the HD Micro Dome Camera 11

Installing the Dome Cover 11

For More Information 12

LED Indicators 13

Removing the Dome Cover 14

Reset to Factory Default Se ttings 15

Setting the IP Address Through the ARP/Ping Method 16

Specifications 17

Limited Warranty & Technical Support 19

iv

Overview

Shroud View

1. Dome Shield

Hides the camera's field of view from observers.

2. Shield Locking Tab

Locks the dome shield into place.

3. Cover Release Tab

Allows you to release and remove the dome cover.

1 Overview

Side View

1. Locking Sheet Springs

Locks the in-ceiling camera into place.

2. Lock Release Snaps

Releases the in-ceiling lock.

3. Gimbal

Allows you to move and aim the camera after it has been installed.

SideView 2

Front View

1. Vertical Marker

Provides a vertical reference point for the video image. Points up.

2. Horizon Markers

Provides a reference point for aligning the video image with the horizon line.

3 Front View