Avid Hifi Diva 2 Owners manual
V 1.0E
INSTRUCTION MANUAL
DIVA II
Extended 5-Year Warranty
AVID is pleased to extend the normal warranty duration to 5-Years from the date
of original shipping. This warranty is transferable in the unlikely event that you would
sell this unit onto another party. Register your product at;
www.avidhifi.co.uk/register.htm
Table of Contents
Section Page
Preface 3
Introduction 3
Warnings 3
Packing 3
Parts Checklist 3
Set-up Instructions 4
Power Supply 5
Servicing 6
Cleaning 6
Warranty-Terms and Conditions 6
Specifications 7
WARNING
YOU MUST ALWAYS REMOVE THE PLATTER AND BEARING
AND USE THE TRANSIT PACKAGING WHEN YOU TRANSPORT
YOUR TURNTABLE OR YOU MAY DAMAGE THE BEARING.
DON’T PUT IT ON THE BACK SEAT OF YOUR CAR—YOU’LL BREAK IT
PREFACE
Please take time to read this Instruction Manual before unpacking your Diva II Turntable.
This product is a precision-engineered machine and whilst damage is unlikely with careful handling, the
sheer mass of some of the parts could lead to damage of less robust parts within its design.
Some of these parts have been excluded from the warranty.
<TAKE CARE AND READ THIS MANUAL>
INTRODUCTION
Diva II is an audio analogue turntable manufactured to extreme limits of precision, design and detail.
There are many unique and novel features in this product an d its design allows you to install the pickup arm and cartridge of your choice. With correct ancillary equipment will tak e y our listening pleasure
to new levels of excellence.
Whilst it shares some features found in other turntables, it has been designed without compromise not
trying to emulate or improve existing designs but redefine the whole thinking behind turntable design.
We hope that you enjoy this turntable for many years!
WARNINGS
1. To prevent fire or electric shocks do not expose either the power supply or motor assembly to rain
or moisture.
2. The Main Bearing contains a Sapphire Cup Jewel and this can be damaged if proper care is not
taken (see set-up and warranty) and this will affect or stop your turntable working correctly.
3. The Power Supply contains voltages, which can cause serious injury or death as there are no user
serviceable parts and there is no reason to open it. In situations of failure return to an approved
dealer or service agent.
There are calibrated components inside and altering their settings will
affect the performance and void the warranty.
4. The Motor is a sealed component and
must under no circumstances be opened or adjusted.
PACKAGING
Save all the packing in a dry place away from fire hazard. The Diva II Turntable is a precision
instrument and the packaging has been especially designed so that all component parts are safe
during transportation.
You should not have occasion to return your unit to us, but if you need to, the unit must be shipped in
its original packaging to keep it from damage. In the event of the packing being lost or damaged
further packing can be provided at cost.
Do not transport the turntable assembled. This may cause damage and void the warranty.
PARTS CHECKLIST
The packing has been designed to eliminate parts being missed, however if something is found to be
amiss please contact your dealer.
Instruction Manual 1 Bearing Drive Hub 1 Pick Up Arm (if supplied) 1
Platter 1 Motor Assembly 1 Arm Adapter (if supplied) 1
Drive Belt 1 Power Supply 1
Clamp 1 Power Cord 1
Main Chassis 1
4mm Tungsten Carbide Ball 1
Loading...