Avid Hifi Diva Owners manual
AV ID
D IVA
T UR N TAB LE S YS TE M
ENGLISH
PLEASE FULLY READ THIS DOCUMENT BEFORE
ATTEMPTING TO ASSEMBLE YOUR NEW TURNTABLE
PACKAGING
Save all the packing in a dry place away from fire hazard. The DIVA Turntable is a precision instrument
and the packaging has been especially designed so that all component parts are safe during transportation.
We recommend that you do not transport with turntable assembled and never with the bearing fitted.
CONTENTS
Warnings 2
Mains Supply Frequency 2
Specifications 2
Box Contents and Drawings 3
Set-Up Instructions 4
Pick-Up Arm Adjustments 5
Suspension Installation and Adjustment 6
Drive System and Alignment 7
Motor/PSU Connections 8
PSU Operation 8
Clamp Operation 8
Power Supply Fuse 9
Cleaning 9
Warranty 9
----------------------------------------------------------------------------------------------------------------------------------------------
WARRANTY EXTENSION
Return slip with your details and you will sent our extended 5 year warrenty.
NAME:____________________________________________
ADDRESS:_________________________________________
__________________________________________________
S/N______ DEALER:__________PURCHASE DATE_______
Return to: AVID. Unit 52, 137 NorthGate, Alconbury Airfield, Huntingdon, Cambs. PE28 4WX ENGLAND
2
WARNINGS
SPECIFICATIONS
Keep the Drive Belt, Pulley and Platter
free from contamination.
If the Drive Belt is dirty, replacement is
required. It is not possible to clean.
Symptoms that the belt needs changing;
Speed instability and loss of dynamics.
Do not expose unit to rain or water.
The Power Supply contains voltages that
can cause serious injury or death. There
are no user serviceable parts and no
reason to open. In situations of failure
return to approved dealer or agent.
Do not use or let liquid cleaners enter the
Power Supply.
The Platter surface may be cleaned with
normal glass cleaner.
DRIVE : Belt Drive
SPEEDS : 33 and 45 RPM
PLATTER MASS : 3.3Kg
BEARING : Inverted Stainless Steel, Tungsten/Sapphire Thrust
SUSPENSION : 3 Point Variable Frequency Springs
FREQUENCY : 4.5 Hz (Variable)
PICK-UP ARM : SME & REGA RB300 Arm Boards standard.
OPTIONS Adapters for REGA RB1000, Wilson Benesch,
Dynavector, Triplanar & Graham available.
Different arm mountings to order.
PICK-UP ARM : 9" Pick-Up Arms onto Standard arm/tube rods.
VARIANTS 12" Pick-Up Arms onto Long arm/tube rods.
(When fitting 12" Arms it is recommended that
the Long Suspension Bars are used.)
MOTOR : 24v AC Synchronous 50/60Hz
MAINS SUPPLY : Voltage and Frequency Specified on PSU rear.
CONSUMPTION : 5 watts Max.
The Main Bearing contains a Sapphire Cup
Jewel and this can be damaged if proper
care is not taken. This will effect or stop
the turntable working correctly.
MAINS SUPPLY FREQUENCY
Local electrical supply frequency is either 50Hz or 60Hz.
Regions with dual frequencies will be supplied with both
drive pulleys so that the correct speed can be achieved.
To change the drive pulley, remove screw with wrench
supplied and pull off pulley. Replace with correct pulley
and correctly align. Finally replace screw.
Pulley
Screw
Spindle
Motor
DRIVE PULLEY ALIGNMENT
Use inside of drive pulley for correct alignment
Spindle top level with
inside of drive pulley
1.72mm Gap
DIMENSIONS : Turntable 460 x 375 x 130mm
(W x H x D) : PSU 160 x 60 x 138mm
WEIGHT : 11.2Kg (Shipping 13.0Kg)
Improvements may result in specification or feature changes without notice.
Illustrations may differ slightly for production models.
500mm (655mm)
375mm (465mm)
IF IN DOUBT CONTACT YOUR DEALER
!
460mm (600mm)
( ) Bracketed figures show maximum dimensions when using 2 x 12" arms and long Suspension Bars.
3
Box Contents and Drawings
Weight 1 Arm Board 1
Platter 1
Suspension Bars 3 Arm Rods & Tube 2/1
Suspension Housings 3 Motor 1
Tools 5
Drive Pulley
Another pulleys will be
included if specified or
needed in your region
Clamp 1
Bearing Ball 1
Drive Belt 1
Main Bearing / Hub 1 Subchassis 1
Power Cord 1
Some regions will be supplied
by the local importer or dealer
Power Supply 1
Loading...