Avid 9900-65257-00 User manual

Using the Avid® Mojo® DX

Legal Notices

Product specifications are subject to change without notice and do not represent a commitment on the part of Avid
Technology, Inc.

The software described in this document is furnished under a license agreement. You can obtain a copy of that license by
visiting Avid's Web site at www.avid.com. The terms of that license are also available in the product in the same directory as
the software. The software may not be reverse assembled and may be used or copied only in accordance with the terms of the
license agreement. It is against the law to copy the software on any medium except as specifically allowed in the license
agreement.

This product may be protected by one or more U.S. and non-U.S patents. Details are available at www.avid.com/patents.

This document is protected under copyright law. An authorized licensee of Avid Mojo DX may reproduce this publication for the
licensee’s own use in learning how to use the software. This document may not be reproduced or distributed, in whole or in
part, for commercial purposes, such as selling copies of this document or providing support or educational services to others.
This document is supplied as a guide for Avid Mojo DX. Reasonable care has been taken in preparing the information it
contains. However, this document may contain omissions, technical inaccuracies, or typographical errors. Avid Technology,
Inc. does not accept responsibility of any kind for customers’ losses due to the use of this document. Product specifications
are subject to change without notice.

Copyright © 2013 Avid Technology, Inc. and its licensors. All rights reserved.

Attn. Government User(s). Restricted Rights Legend

U.S. GOVERNMENT RESTRICTED RIGHTS. This Software and its documentation are “commercial computer software” or
“commercial computer software documentation.” In the event that such Software or documentation is acquired by or on behalf
of a unit or agency of the U.S. Government, all rights with respect to this Software and documentation are subject to the terms
of the License Agreement, pursuant to FAR §12.212(a) and/or DFARS §227.7202-1(a), as applicable.

Trademarks

003, 192 Digital I/O, 192 I/O, 96 I/O, 96i I/O, Adrenaline, AirSpeed, ALEX, Alienbrain, AME, AniMatte, Archive, Archive II,
Assistant Station, AudioPages, AudioStation, AutoLoop, AutoSync, Avid, Avid Active, Avid Advanced Response, Avid DNA,
Avid DNxcel, Avid DNxHD, Avid DS Assist Station, Avid Ignite, Avid Liquid, Avid Media Engine, Avid Media Processor, Avid
MEDIArray, Avid Mojo, Avid Remote Response, Avid Unity, Avid Unity ISIS, Avid VideoRAID, AvidRAID, AvidShare, AVIDstripe,
AVX, Beat Detective, Beauty Without The Bandwidth, Beyond Reality, BF Essentials, Bomb Factory, Bruno, C|24,
CaptureManager, ChromaCurve, ChromaWheel, Cineractive Engine, Cineractive Player, Cineractive Viewer, Color Conductor,
Command|24, Command|8, Control|24, Cosmonaut Voice, CountDown, d2, d3, DAE, D-Command, D-Control, Deko,
DekoCast, D-Fi, D-fx, Digi 002, Digi 003, DigiBase, Digidesign, Digidesign Audio Engine, Digidesign Development Partners,
Digidesign Intelligent Noise Reduction, Digidesign TDM Bus, DigiLink, DigiMeter, DigiPanner, DigiProNet, DigiRack,
DigiSerial, DigiSnake, DigiSystem, Digital Choreography, Digital Nonlinear Accelerator, DigiTest, DigiTranslator, DigiWear,
DINR, DNxchange, Do More, DPP-1, D-Show, DSP Manager, DS-StorageCalc, DV Toolkit, DVD Complete, D-Verb, Eleven,
EM, Euphonix, EUCON, EveryPhase, Expander, ExpertRender, Fader Pack, Fairchild, FastBreak, Fast Track, Film Cutter,
FilmScribe, Flexevent, FluidMotion, Frame Chase, FXDeko, HD Core, HD Process, HDpack, Home-to-Hollywood, HYBRID,
HyperSPACE, HyperSPACE HDCAM, iKnowledge, Image Independence, Impact, Improv, iNEWS, iNEWS Assign, iNEWS
ControlAir, InGame, Instantwrite, Instinct, Intelligent Content Management, Intelligent Digital Actor Technology, IntelliRender,
Intelli-Sat, Intelli-sat Broadcasting Recording Manager, InterFX, Interplay, inTONE, Intraframe, iS Expander, iS9, iS18, iS23,
iS36, ISIS, IsoSync, LaunchPad, LeaderPlus, LFX, Lightning, Link & Sync, ListSync, LKT-200, Lo-Fi, MachineControl, Magic
Mask, Make Anything Hollywood, make manage move | media, Marquee, MassivePack, Massive Pack Pro, Maxim, Mbox,
Media Composer, MediaFlow, MediaLog, MediaMix, Media Reader, Media Recorder, MEDIArray, MediaServer, MediaShare,
MetaFuze, MetaSync, MIDI I/O, Mix Rack, Moviestar, MultiShell, NaturalMatch, NewsCutter, NewsView, NewsVision, Nitris,
NL3D, NLP, NSDOS, NSWIN, OMF, OMF Interchange, OMM, OnDVD, Open Media Framework, Open Media Management,
Painterly Effects, Palladium, Personal Q, PET, Podcast Factory, PowerSwap, PRE, ProControl, ProEncode, Profiler, Pro Tools,
Pro Tools|HD, Pro Tools LE, Pro Tools M-Powered, Pro Transfer, QuickPunch, QuietDrive, Realtime Motion Synthesis, Recti-Fi,
Reel Tape Delay, Reel Tape Flanger, Reel Tape Saturation, Reprise, Res Rocket Surfer, Reso, RetroLoop, Reverb One,
ReVibe, Revolution, rS9, rS18, RTAS, Salesview, Sci-Fi, Scorch, ScriptSync, SecureProductionEnvironment, Serv|GT,
Serv|LT, Shape-to-Shape, ShuttleCase, Sibelius, SimulPlay, SimulRecord, Slightly Rude Compressor, Smack!, Soft
SampleCell, Soft-Clip Limiter, SoundReplacer, SPACE, SPACEShift, SpectraGraph, SpectraMatte, SteadyGlide,
Streamfactory, Streamgenie, StreamRAID, SubCap, Sundance, Sundance Digital, SurroundScope, Symphony, SYNC HD,
SYNC I/O, Synchronic, SynchroScope, Syntax, TDM FlexCable, TechFlix, Tel-Ray, Thunder, TimeLiner, Titansync, Titan, TL
Aggro, TL AutoPan, TL Drum Rehab, TL Everyphase, TL Fauxlder, TL In Tune, TL MasterMeter, TL Metro, TL Space, TL
Utilities, tools for storytellers, Transit, TransJammer, Trillium Lane Labs, TruTouch, UnityRAID, Vari-Fi, Video the Web Way,
VideoRAID, VideoSPACE, VTEM, Work-N-Play, Xdeck, X-Form, Xmon and XPAND! are either registered trademarks or
trademarks of Avid Technology, Inc. in the United States and/or other countries.

Using the Avid Mojo DX • 0130-07939-01 Rev D • April 2013

2

Contents

Symbols and Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

If You Need Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Accessing the Goodies Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Avid Training Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Technical Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 1 Using the Avid Mojo DX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

How the Avid Mojo DX Handles Capture and Output . . . . . . . . . . . . . . . . . . . . . . . . . 9

Site Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Rack Mounting the Avid Mojo DX Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Environmental and Safety Guidelines for Installing the Avid Mojo DX in a Rack 11

Installing the Avid Mojo DX in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Components for the Avid Mojo DX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Avid Mojo DX Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Avid Mojo DX Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Synchronizing Audio and Video Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Specifications for the Avid Mojo DX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Chapter 2 Configuring and Connecting Avid Editing Systems. . . . . . . . . . . . . . . . 23

System Connections and Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Installing the PCIe Host Interface Board (HIB). . . . . . . . . . . . . . . . . . . . . . . . . . 23

Installing the PCI ExpressCard for Laptop Use . . . . . . . . . . . . . . . . . . . . . . . . . 23

Connecting the Avid Mojo DX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Connecting the Keyboard and Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Connecting the Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Storage Options and Drive Striping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Connecting to Local Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Avid VideoRAID ST and Avid VideoRAID SRs . . . . . . . . . . . . . . . . . . . . . . . . . 28

Avid MediaDock Ultra320 Informations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Avid Shared Storage Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Formatting and Striping Media Drives (Windows) . . . . . . . . . . . . . . . . . . . . . . . 29

Formatting and Striping Media Drives (Macintosh) . . . . . . . . . . . . . . . . . . . . . . 29

Moving Striped Drives to Another System (Macintosh Only). . . . . . . . . . . . . . . 30

Connecting Cameras, Decks, and Monitors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Connecting Video Devices — Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Connecting a Video Deck — Serial Digital Signal . . . . . . . . . . . . . . . . . . . . . . . 31

Connecting a Client Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Support Output Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Appendix A Regulatory and Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

FCC Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Safety Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Canadian ICES-003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

LED Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Disposal of Waste Equipment by Users in the European Union . . . . . . . . . . . . . . . 34

Australia and New Zealand EMC Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Taiwan EMC Regulations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Korean EMC Regulations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Class A Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Japan EMC Regulations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Class A Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

4

Using This Guide

Important Information

Avid recommends that you read all the information in this document before connecting or
using your new hardware and software.

The following topics explain how to use and connect cables and devices to the Avid
input/output hardware device and how to connect specific devices to an Avid-supported PC
or Macintosh system that the Avid hardware is connected to. The PC and Macintosh systems
supported for your Avid input/output hardware can change at any time.

Unless noted otherwise, the material in this document applies to the Windows

®

, and Mac OS® X operating systems.The majority of screen shots in this document

Vis ta
were captured on a Windows system, but the information applies to both Windows and Mac
OS X systems. Where differences exist, both Windows and Mac OS X screen shots are
shown.

Please look at the ReadMe file that installs with the application. It contains important

n

information that you should use in conjunction with the information presented in these
topics.

®

XP, Windows

Symbols and Conventions

Avid documentation uses the following symbols and conventions:

Symbol or Convention Meaning or Action

n

c

w

A note provides important related information, reminders,
recommendations, and strong suggestions.

A caution means that a specific action you take could cause harm to
your computer or cause you to lose data.

A warning describes an action that could cause you physical harm.
Follow the guidelines in this document or on the unit itself when
handling electrical equipment.

Symbol or Convention Meaning or Action

> This symbol indicates menu commands (and subcommands) in the

order you select them. For example, File > Import means to open the
File menu and then select the Import command.

This symbol indicates a single-step procedure. Multiple arrows in a list
indicate that you perform one of the actions listed.

(Windows), (Windows
only), (Macintosh), or
(Macintosh only)

Bold font Bold font is primarily used in task instructions to identify user interface

Italic font Italic font is used to emphasize certain words and to indicate variables.

Courier Bold font

Ctrl+key or mouse action Press and hold the first key while you press the last key or perform the

If You Need Help

If you are having trouble using your Avid product:

1. Retry the action, carefully following the instructions given for that task in this guide. It
is especially important to check each step of your workflow.

2. Check the latest information that might have become available after the documentation
was published:

- If the latest information for your Avid product is provided as printed release notes,

they ship with your application and are also available online.

This text indicates that the information applies only to the specified
operating system, either Windows or Macintosh OS X.

items and keyboard sequences.

Courier Bold font identifies text that you type.

mouse action. For example, Command+Option+C or Ctrl+drag.

If the latest information for your Avid product is provided as a ReadMe file, it is
supplied on your Avid installation CD or DVD as a PDF document
(README_product.pdf) and is also available online.

You should always check online for the most up-to-date release notes or ReadMe
because the online version is updated whenever new information becomes
available. To view these online versions, select ReadMe from the Help menu, or visit

the Knowledge Base at www.avid.com/readme.

3. Check the documentation that came with your Avid application or your hardware for
maintenance or hardware-related issues.

6

4. Visit the online Knowledge Base at www.avid.com/onlinesupport. Online services are
available 24 hours per day, 7 days per week. Search this online Knowledge Base to find
answers, to view error messages, to access troubleshooting tips, to download updates,
and to read or join online message-board discussions.

Accessing the Goodies Folder

Avid supplies a Goodies folder located on the editing application DVD. Access the Goodies
folder by browsing the DVD. This folder contains programs and files you might find useful
when trying to perform functions beyond the scope of your Avid editing application.

The information in the Goodies folder is provided solely for your reference and as
suggestions for you to decide if any of these products fit into your process. Avid is not
responsible for the manufacture, support, or sales of these products. Avid is also not
responsible for any loss of data or time, or any other adverse results related to the use of
these products. All risks of using such products or accessing such Web sites are entirely your
own. The Web sites listed in the Goodies folder are not under the control of Avid, and Avid
is not responsible for their content, any changes or updates to them, or the collection of any
personal data or information by the operators of such Web sites. All information and product
availability is subject to change without notice.

Accessing the Goodies Folder

Avid Training Services

Avid makes lifelong learning, career advancement, and personal development easy and
convenient. Avid understands that the knowledge you need to differentiate yourself is always
changing, and Avid continually updates course content and offers new training delivery
methods that accommodate your pressured and competitive work environment.

For information on courses/schedules, training centers, certifications, courseware, and
books, please visit www.avid.com/training or call Avid Sales at 800-949-AVID
(800-949-2843).

Technical Support Information

Most products feature a number of coverage options. Avid Assurance service offerings are
designed to facilitate your use of Avid solutions. Service options include extended telephone
coverage, automatic software maintenance, extended hardware warranty, and preferred
pricing on replacement parts.

For more information regarding Avid’s service offerings, visit www.avid.com/support or call
Avid Sales at 800-949-AVID (800-949-2843).

7

Program availability and details might vary depending on geographic location and are
subject to change without notice. Contact your local Avid office or your local Avid Reseller
for complete program information and pricing. However, if you need help locating an Avid
office or Avid Reseller near you, please visit www.avid.com or call in North America
800-949-AVID (800-949-2843). International users call 978-275-2480.

8

1 Using the Avid Mojo DX

This chapter provides general information about your Avid input/output hardware in the
following main topics:

• How the Avid Mojo DX Handles Capture and Output

• Site Planning

• Rack Mounting the Avid Mojo DX Enclosure

• Components for the Avid Mojo DX

• Avid Mojo DX Front Panel

• Avid Mojo DX Rear Panel

• Synchronizing Audio and Video Equipment

• Specifications for the Avid Mojo DX

How the Avid Mojo DX Handles Capture and Output

The Avid input/output hardware captures and outputs video and audio from external
equipment such as cameras and decks. The hardware accepts video and audio in different
formats and resolutions, and changes these formats and resolutions to Avid-specific data for
transfer to the Avid editing system. Data transfer uses an Avid-specific protocol that
describes the format and resolution of the media you are capturing.

Once the data is on your Avid editing system, you edit in your Avid editing application, and
then return the data to the Avid input/output hardware, where it is converted to the format
and resolution required for video and audio output.

Avid Mojo DX captures and outputs SD and HD video and audio, and connects to an Avid
editing system via a Host Interface Board (HIB).

Avid Mojo DX captures SD and HD video material in digital format via the Serial Digital
Interface (SDI) connectors, and captures audio in digital Sony
Interconnection Format/Alesis
audio as well as through analog 1/4” TRS connectors.

®

Digital Audio Tape (SPDIF/ADAT) and as SDI embedded

®

/Philips® Digital

1 Using the Avid Mojo DX

Avid Mojo DX outputs SD and HD video material in digital format via an SDI connector. A
High-Definition Multimedia Interface (HDM
displays. Avid Mojo DX outputs audio in SPDIF/ADAT format and as SDI embedded audio,
as well as through analog 1/4” TRS connectors.

Site Planning

When preparing your site, you must consider the environmental, electrical, and space
requirements for your Avid Mojo DX workstation, as well as for any additional equipment.
Before setting up your system, see the ReadMe provided with your Avid editing application
to make sure that there are no changes to the information in this document.

For instructions on setting up workstation hardware, see the setup documentation provided
with the workstation. For a rackmount workstation, you must install the workstation into a
standard rack before connecting the hardware.

To prevent equipment damage that might be caused by static electricity, do all of the
following before making any connections:

• Always use anti-static protection.

• Always connect devices to a properly grounded outlet.

• Turn off all devices.

I

™

) connector provides easy hook-up to HD

10

• Touch the metal casing of the device before handling any circuit boards.

Environmental Requirements

The site you choose for your Avid Mojo DX workstation should meet the following
environmental requirements:

• Site is clean and dust free.

• Site is free from significant temperature or humidity changes.

• Site is sturdy, level, and not subject to vibration.

• Site is away from radio frequency emissions, high-traffic, or high-noise areas.

• Site provides adequate space in front of and behind the workstation components, so you
can connect cables and service your workstation. This also provides adequate airflow
for cooling.

• Site provides a minimum clearance of 3 inches (7.6 cm) for the side and back panels of
the deskside base unit.

• Site for the editing workstation is a table (or other surface) that is at least 60 inches wide
by 48 inches deep (150 cm × 120 cm).

Rack Mounting the Avid Mojo DX Enclosure

Electrical Requirements

Your site should meet the following electrical requirements:

• Site has adequate, grounded, power outlets for the Avid Mojo DX. This prevents the
need for extension cords.

• Site is away from major electrical equipment such as motors, air conditioners, or
elevators.

• Site is not subject to static electrical buildup.

Avid recommends the use of an uninterruptible power supply (UPS) appropriately sized for
your system configuration. The UPS provides system protection against sudden power
surges or losses that could cause you to lose your work.

Plug only the Avid Mojo DX and other system equipment into the power strip. Do not plug in

n

coffee makers, radios, lights, or other non-Avid devices.

For information on the electrical specifications of your Avid editing system and your Avid
Mojo DX input/output hardware, see “Specifications for the Avid Mojo DX” on page 20.

Rack Mounting the Avid Mojo DX Enclosure

This section describes how to mount the Avid Mojo DX in a 19-inch (483-mm) National
Electrical Manufacturers Association (NEMA
rack. Avid recommends that you mount your Avid Mojo DX in a rack before you connect
any cables.

If you need to rack mount the HP workstation, a rack-mount kit with installation instructions

n

is available from HP. The HP Workstation system requires five rack units.

®

) or Electronics Industry Association (EIA)

Environmental and Safety Guidelines for Installing the Avid Mojo DX in a Rack

When you install the Avid Mojo DX in a rack, you must take precautions against the
following hazards:

Hazard Description

Elevated Operating
Ambient Temperature

When the Avid Mojo DX is installed in a closed or multiunit rack assembly, the
operating ambient temperature of the rack environment might be greater than the
room ambient temperature. Therefore, consider installing the equipment compatible
with the manufacturer’s maximum ambient temperature of 104ºF (40ºC).

11

1 Using the Avid Mojo DX

Hazard Description

Reduced Airflow Do not compromise the amount of airflow required for safe operation of the

equipment.

Mechanical Loading Avoid a hazardous condition due to an uneven mechanical loading.

Circuit Overloading Consider connecting the equipment to the supply circuit and the effect that

overloading of circuits might have on overcurrent protection and supply wiring. Use
appropriate equipment nameplate ratings.

Reliable Grounding Maintain reliable grounding of rack-mounted equipment. Give particular attention to

supply connections other than direct connections to the branch circuit (for example,
use power strips).

Installing the Avid Mojo DX in a Rack

The Avid Mojo DX is designed for 19-inch (483-mm) rack enclosures and requires one EIA
rack unit (2RU), or 1.75 inches (44.4 mm) of rack space. The Avid Mojo DX ships with a
rackmount accessory kit that includes rack-nut clips for rack enclosures that do not have
threaded holes. Threaded rack-nut clips slide into the holes of the rack and provide threaded
holes to secure the rack components. The rack-mounting kit also includes rack-mounting
ears, an Allen wrench, and rack screws.

12

c

c

The Avid Mojo DX ships configured for desktop use. To rackmount the unit you must
remove the support feet and install the rack-mounting ears.

To ensure the stability of the rack enclosure, start from the bottom when you install the
rack components in the rack enclosure.

Have someone help you to lift the Avid Mojo DX enclosure.

To prepare the Avid Mojo DX for rackmounting:

1. Unscrew each of the hex screws from the four support feet using the Allen wrench, and
set the screws aside.

2. Remove the four support feet from the Avid Mojo DX and set them aside.