AVIC TMS150XG1-10TB Specification
Global LCD Panel Exchange Center
SHANGHAI AVIC OPTOELECTRONICS Q/S1005-2011
MODEL NO. : TMS150XG1-10TB
ISSUED DATE: 2011/06/22
VERSION : 1.4
www.panelook.com
Preliminary Specification
Final Product Specification
Customer :
Approved by Notes
SHANGHAI AVIC Confirmed :
Prepared by Checked by Approved by
Wei Zhang Xufeng Wang Xiaoping Sun
This technical specification is subjected to change without notice
The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page 1 of 29
www.panelook.com
Global LCD Panel Exchange Center
SHANGHAI AVIC OPTOELECTRONICS Q/S1005-2011
www.panelook.com
INTRODUCTION
• WARRANTY
Shanghai AVIC OPTOELECTRONICS Co. Ltd (hereinafter called "AVIC") warrants that this product meets the
product specifications set forth in this document. If this product under normal operation is found to be
non-conforming to the product specifications, and such non-conformance is promptly notified to AVIC within one (1)
year after the delivery date, and further such non-conformance is solely attributable to AVIC, AVIC shall repair the
non-conforming product or replace it with a conforming one, free of charge. However, this warranty does not apply
to any non-conformance that can be found easily by incoming inspections or those resulting from any one of the
following˖
1) Unauthorized or improper repair, maintenance or modification
2) Operation or use against specifications, instructions or warnings given by AVIC
3) Any other causes attributable to customer
In case AVIC repairs or replaces a product after the one (l)-year warranty period, AVIC shall be entitled to charge
for such repair or replacement. Those replaced parts shall be covered with six (6)-month warranty period from the
replacement day. Non-conforming products may be replaced with substitutes instead of repair when the manufacture of
this product has been terminated.
EXCEPT AS EXPRESSLY SET FORTH HEREIN, AVIC DISCLAIMS ANY WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, AND DISCLAIMS ANY REMEDIES.
• MAINTENANCE
The specifications of maintenance parts may be partially changed within equivalent quality or better. In this
product, AVIC will not accept to maintain for only mounting parts on circuit board (e.g. connector, fuse, capacitor,
resistor, etc.) and only backlight conformation parts (e.g. reflector sheet, light guide plate, etc.).
If AVIC is planning discontinuation for this product, AVIC shall inform it to customers in six (6)-months advance
from the issued date of official agreements. In addition, after product discontinuation, AVIC may replace substitutes
instead of maintenance parts with whole product.
CHANGE CONTROL
•
For the purpose of product improvement, this product design may be changed for specifications, appearance, parts,
and circuits and so on. In case a design change is affected on the product specifications, AVIC shall inform it to
customers in advance.
HANDLING OF DOUBTFUL POINTS
•
Any question arising out of, or in connection with, this SPECIFICATION or any matter not stipulated herein will be
settled each time upon consultation between both parties.
The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page 2 of 29
www.panelook.com
Global LCD Panel Exchange Center
SHANGHAI AVIC OPTOELECTRONICS Q/S1005-2011
INTRODUCTION ......................................................................................................................................................... 2
CONTENTS .................................................................................................................................................................. 3
Record of Revision ........................................................................................................................................................ 4
1. OUTLINE ................................................................................................................................................................. 5
1
.1 STRUCTURE AND PRINCIPLE ........................................................................................................................... 5
1.2 APPLICATIONS ..................................................................................................................................................... 5
1.3 FEATURES ............................................................................................................................................................. 5
2. GENERAL SPECIFICATIONS ................................................................................................................................ 6
3. ABSOLUTE MAXIMUM RATINGS ....................................................................................................................... 7
4. BLOCK DIAGRAM ................................................................................................................................................. 8
5. MECHANICAL SPECIFICATIONS ........................................................................................................................ 9
6. ELECTRICAL CHARACTERISTICS ..................................................................................................................... 9
7. CONNECTIONS AND FUNCTIONS FOR INTERFACE PINS ........................................................................... 11
8. DISPLAY COLORS AND INPUT DATA SIGNALS ............................................................................................. 14
9. INTERFACE TIMING ............................................................................................................................................ 15
10. OPTICS ................................................................................................................................................................. 19
11. MARKINGS .......................................................................................................................................................... 21
11.1 PRODUCT LABEL ............................................................................................................................................ 21
11.2 OTHER MARKINGS ......................................................................................................................................... 22
11.3 INDICATION LOCATIONS ............................................................................................................................... 22
12. PACKING, TRANSPORTATION AND DELIVERY ........................................................................................... 23
12.1 PACKING ........................................................................................................................................................... 23
12.2 INSPECTION RECORD SHEET ....................................................................................................................... 23
12.3 TRANSPORTATION .......................................................................................................................................... 23
12.4 SIZE AND WEIGHT FOR PACKING BOX ...................................................................................................... 23
12.5 OUTLINE FIGURE FOR PACKING ................................................................................................................. 24
13. PRECAUTIONS ................................................................................................................................................... 25
1 MEANING OF CUTION SIGNS ....................................................................................................................... 25
13.
13.2 CAUTIONS ......................................................................................................................................................... 25
13.3 ATTENTIONS ..................................................................................................................................................... 25
14. OUTDRAWING .................................................................................................................................................... 28
www.panelook.com
CONTENTS
The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page 3 of 29
www.panelook.com
Global LCD Panel Exchange Center
SHANGHAI AVIC OPTOELECTRONICS Q/S1005-2011
Rev Issued Date Description Editor
1.0 2009-12-22 Preliminary Release Hyman Chen
www.panelook.com
Record of Revision
2.0(1.1) 2010-06-01
3.0(1.2) 2010-7-7
1.3 2011-01-30
1.4 2011-06-22 Modify the min. value of “th” Wei Zhang
Add “Operation life time,
LVDS interface (6 bit+HIFRC) revise
Change the front cover to new format.
Differential input voltage”
Hyman Chen
James Xiao
Wei Zhang
The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page 4 of 29
www.panelook.com
Global LCD Panel Exchange Center
SHANGHAI AVIC OPTOELECTRONICS Q/S1005-2011
www.panelook.com
1. OUTLINE
1.1 STRUCTURE AND PRINCIPLE
TMS150XG1-10TB module is composed of the amorphous silicon thin film transistor liquid crystal display
(a-Si TFT LCD) panel structure with driver LSIs for driving the TFT (Thin Film Transistor) array and a backlight. The
a-Si TFT LCD panel structure is injected liquid crystal material into a narrow gap between the TFT array glass
substrate and a color-filter glass substrate.
Color (Red, Green, Blue) data signals from a host system (e.g. PC, signal generator, etc.) are modulated into
best form for active matrix system by a signal processing board, and sent to the driver LSIs which drive the individual
TFT arrays. The TFT array as an electro-optical switch regulates the amount of transmitted light from the backlight
assembly, when it is controlled by data signals. Color images are created by regulating the amount of transmitted light
through the TFT array of red, green and blue dots.
1.2 APPLICATIONS
• Monitor for PC˄for amusement or industry˅
1.3 FEATURES
• a-Si TFT active matrix
• LVDS interface (6 bit+HIFRC)
• Wide viewing angle
• High response time: 8ms (typ.)
• PSWG standard
• High contrast: 600:1(typ.)
• Edge light type backlight (Inverter less)
• ROHS compliance
• TCO 5.0 compliance
The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page 5 of 29
www.panelook.com
Global LCD Panel Exchange Center
SHANGHAI AVIC OPTOELECTRONICS Q/S1005-2011
2. GENERAL SPECIFICATIONS
www.panelook.com
Display area
Diagonal size of display
Drive system
Display color
Pixel
Pixel arrangement
Dot pitch
Pixel pitch
Module size
Weight
Contrast ratio
Viewing angle
Color gamut
Response time
Luminance
Tran missive Mode
304.128 (W) x 228.096 (H) mm (typ.)
38.0 cm (15.0 inches)
a-Si TFT active matrix
16,777,216 colors (6bit+HIFRC)
1,024 (H) x 768 (V) pixels
RGB vertical stripe
0.099 (W) x 0.297 (H) mm
0.297 (W) x 0.297 (H) mm
326.50f0.5 (W) x 253.5f0.5 (H) x 11.13f0.5 (D) mm (typ.)
1000
g (typ.)
600:1 (typ.)
160°/ 160° (typ.)
60 % (typ.)
8 ms (typ.)
250cd/m
Normally White
2
(typ.)
Surface Treatment
Signal system
Power supply voltage
Backlight
Power consumption
AG Type
LVDS 1port
LCD panel signal processing board˖3.3V
2 cold cathode fluorescent lamps
(10.1 )W (typ.)
The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.
Page 6 of 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
˄ˁRH˅
ć
Global LCD Panel Exchange Center
SHANGHAI AVIC OPTOELECTRONICS Q/S1005-2011
3. ABSOLUTE MAXIMUM RATINGS
Parameter Symbol Rating Unit Remarks
www.panelook.com
Power supply
voltage
Input voltage
for signals
Operating temperature Top 0 ~ +55 ć Note3ˈ4
Note1: Display signals are D0+/-, D1+/-, D2+/-, D3+/- and CK+/-.
Note2: Function signal is MSL.
Note3: Temperature and relative humidity range is shown in the figure below.
(a) 90%RH Max. (Ta İ40ć)
(b)Web-bulb temperature should be39ćMax.(Ta˚40ć)
(c) No condensation.
Note4: The temperature of panel display surface area should be 0ćMin and 60ćMax.
-40
LCD panel signal board VDD -0.3 ~ +3.6 V Ta = 25ć
Display signals
Note1
Function signals
Note2
Storage temperature Tst -20 ~ +60 ć Note3
Absolute humidity AH 70 g/m3 Ta > 55ć
Operating altitude - İ m e&İ7Dİe&
Storage altitude - İ m e&İ7Dİe&
Relative Humidity
80
60
Operating Range
40
20
5
-20 0 20 40 60 80
Storage Range
Temperature
Vi
-0.3 ~ +3.6
and
Vi<VCC +0.3
V Ta = 25ć
The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page 7 of 29
www.panelook.com
Global LCD Panel Exchange Center
SHANGHAI AVIC OPTOELECTRONICS Q/S1005-2011
4. BLOCK DIAGRAM
LCD MODULE I/F
www.panelook.com
D0-
D0+
D1-
D1+
D2-
D2+
CLK-
CLK+
D3-
D3+
MSL
VDD
VBLH1/2
VBLC2/2
100¡
100¡
100¡
100¡
100¡
FUSE
LVDS Receiver
DC/DC
Converter
6KOKPIEQPVTQNNGT
Source Driver
Gate Driver
Power
LCD Panel
H:1024h3˄R,G,B˅
V: 768
Edge side backlight
Note1: Connections between GND, FG (Frame ground) and VBLC (Lamp low voltage terminal) in the product
GND - FG Connected
GND - VBLC Not connected
FG - VBLC Not connected
Note2: These grounds should be connected together in customer equipment.
The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page 8 of 29
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
SHANGHAI AVIC OPTOELECTRONICS Q/S1005-2011
5. MECHANICAL SPECIFICATIONS
Parameter Specification Unit
Module size 326.5f0.5 (W) x 253.5f0.5 (H) x 11.13f0.5 (D) mm
Display area 304.128 (W) x 228.096 (H) mm
Weight 1000 (typ.) g
6. ELECTRICAL CHARACTERISTICS
6.1 Driving for LCD panel signal processing board
Parameter Symbol min. typ. max. Unit Remarks
Power supply voltage VDD 3.0 3.3 3.6 V -
Power supply current IDD - 500Note1 700Note 2 mA at VDD = 3.3V
Permissible ripple voltage VRP - - 100 mV VDD
Differential input voltage ΊViGΊ 200 - 600 mV -
Differential input threshold
voltage for LVDS receiver
Low VTL -100 - mV
at VCM = 1.2V
High VTH - - 100 mV
Note3
Input voltage width for LVDS receiver Vi 0 - 2.4 V -
Terminating resistor RT - 100 - -
Rush current I
- - 2.0 A Note4
rush
Note 1: Checkered flag pattern (EIAJ ED-2522)
Note 2: 2H1V dot inverse pattern
Note 3: Common mode voltage for LVDS receiver
Note4:
Measurement Conditions:
S2
GND
5V
1
3
2
SW- SP DT
5V
F1
Fuse ( 2A )
GND
C1
Cap
1uF/16V
VDD
R1
47K
Q1
MOSFET -N
R2
1K
Q2
MOSFET- N
12V
R3
20K
C3
Cap
10uF/16V
C2
Cap
1uF/16V
GND
The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS
Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written
permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page 9 of 29
www.panelook.com
Loading...