AVG Anti-Virus 2012 User Manual

AVG Anti-Virus 2012
User Manual
Document revision 2012.24 (19.6.2012)
Copyright AVG Technologies CZ, s.r.o. All rights reserved. All other trademarks are the property of their respective owners.
This product uses RSA Data Security, Inc. MD5 Message-Digest Algorithm, C opyright (C ) 1991-2, RSA Data Security, Inc. C reated 1991. This product uses code from C -SaCzech library, C opyright (c) 1996-2001 Jaromir Dolecek (dolecek@ics.muni.cz). This product uses compression library zlib, C opyright (c) 1995-2002 Jean-loup Gailly and Mark Adler. This product uses compression library libbzip2, Copyright (c) 1996-2002 Julian R. Seward.
A V G A nti-V irus 2 01 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 1
Contents
........................................................................................................................ 5
1. Introduction
........................................................................................................................ 6
2. AVG Installation Requirements
2.1 Operation Systems Supported
2.2 Minimum & Recommended HW Requirements
........................................................................................................................ 7
3. AVG Installation Process
3.1 Welcome: Language Selection
3.2 Welcome: License Agreement
3.3 Activate your license
3.4 Select type of installation
3.5 Custom options
3.6 Install progress
3.7 Installation was successful
........................................................................................................................ 15
4. After Installation
4.1 Product registration
4.2 Access to user interface
4.3 Scanning of the whole computer
4.4 Eicar test
4.5 AVG default configuration
.......................................................................................................... 6
.......................................................................................................... 6
.......................................................................................................... 7
.......................................................................................................... 8
.......................................................................................................... 9
.......................................................................................................... 10
.......................................................................................................... 12
.......................................................................................................... 13
.......................................................................................................... 14
.......................................................................................................... 15
.......................................................................................................... 15
.......................................................................................................... 15
.......................................................................................................... 15
.......................................................................................................... 16
........................................................................................................................ 17
5. AVG User Interface
5.1 System Menu
5.2 Security Status Info
5.3 Quick Links
5.4 Components Overview
5.5 System Tray Icon
5.6 AVG Advisor
5.7 AVG Gadget
........................................................................................................................ 32
6. AVG Components
6.1 Anti-Virus
6.2 Link Scanner
6.3 E-mail Protection
6.4 Anti-Rootkit
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 2
.......................................................................................................... 18
.......................................................................................................... 23
.......................................................................................................... 24
.......................................................................................................... 25
.......................................................................................................... 26
.......................................................................................................... 28
.......................................................................................................... 29
.......................................................................................................... 32
.......................................................................................................... 38
.......................................................................................................... 42
.......................................................................................................... 46
6.5 PC Analyzer
6.6 Identity Protection
6.7 Remote Administration
........................................................................................................................ 53
7. My Apps
.......................................................................................................... 47
.......................................................................................................... 49
.......................................................................................................... 51
7.1 AVG Family Safety
7.2 AVG LiveKive
7.3 AVG Mobilation
7.4 AVG PC Tuneup
........................................................................................................................ 57
8. AVG Security Toolbar
........................................................................................................................ 59
9. AVG Do Not Track
9.1 AVG Do Not Track interface
9.2 Information on tracking processes
9.3 Blocking tracking processes
9.4 AVG Do Not Track settings
........................................................................................................................ 65
10. AVG Advanced Settings
10.1 Appearance
10.2 Sounds
10.3 Temporarily disable AVG protection
10.4 Anti-Virus
10.5 E-mail protection
10.6 Link Scanner
10.7 Scans
.......................................................................................................... 53
.......................................................................................................... 54
.......................................................................................................... 54
.......................................................................................................... 55
.......................................................................................................... 60
.......................................................................................................... 61
.......................................................................................................... 61
.......................................................................................................... 62
.......................................................................................................... 65
.......................................................................................................... 68
.......................................................................................................... 69
.......................................................................................................... 70
.......................................................................................................... 76
.......................................................................................................... 84
.......................................................................................................... 87
10.8 Schedules
10.9 Update
10.10 Anti-Rootkit
10.11 Identity Protection
10.12 Potentially Unwanted Programs
10.13 Virus Vault
10.14 Product Improvement Program
10.15 Ignore error status
10.16 Advisor - Known Networks
........................................................................................................................ 122
11. AVG Scanning
11.1 Scanning Interface
11.2 Predefined Scans
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 3
.......................................................................................................... 93
.......................................................................................................... 103
.......................................................................................................... 109
.......................................................................................................... 111
.......................................................................................................... 114
.......................................................................................................... 117
.......................................................................................................... 117
.......................................................................................................... 120
.......................................................................................................... 121
.......................................................................................................... 122
.......................................................................................................... 123
11.3 Scanning in Windows Explorer
11.4 Command Line Scanning
11.5 Scan Scheduling
11.6 Scan Results Overview
11.7 Scan Results Details
.......................................................................................................... 131
.......................................................................................................... 132
.......................................................................................................... 135
.......................................................................................................... 143
.......................................................................................................... 144
11.8 Virus Vault
........................................................................................................................ 154
12. AVG Updates
12.1 Update launch
12.2 Update progress
12.3 Update levels
........................................................................................................................ 156
13. Event History
........................................................................................................................ 158
14. FAQ and Technical Support
.......................................................................................................... 151
.......................................................................................................... 154
.......................................................................................................... 154
.......................................................................................................... 155
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 4
1. Introduction
This user manual provides comprehensive documentation for AVG Anti-Virus 2012. AVG Anti-Virus 2012 offers real-time protection against today’s most sophisticated threats. Chat,
download and exchange files with confidence; play games and watch videos without worry or interruption:
Download, share files and send messages safely with AVG Online Shield™ Stay safe on social networks with AVG Social Networking Protection Surf and search with confidence with LinkScanner's real-time protection
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 5
2. AVG Installation Requirements
2.1. Operation Systems Supported
AVG Anti-Virus 2012 is intended to protect workstations with the following operating systems:
Windows XP Home Edition SP2 Windows XP Professional SP2 Windows XP Professional x64 Edition SP1 Windows Vista (x86 and x64, all editions) Windows 7 (x86 and x64, all editions)
(and possibly higher service packs for specific operating systems)
Note: The ID Protection component is not supported on Windows XP x64. On this operating system you can install AVG Anti-Virus 2012 but only without the IDP component.
2.2. Minimum & Recommended HW Requirements
Minimum hardware requirements for AVG Anti-Virus 2012:
Intel Pentium CPU 1.5 GHz 512 MB of RAM memory 950 MB of free hard drive space (for installation purposes)
Recommended hardware requirements for AVG Anti-Virus 2012:
Intel Pentium CPU 1.8 GHz 512 MB of RAM memory 1350 MB of free hard drive space (for installation purposes)
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 6
3. AVG Installation Process
Where do I get the installation file?
To install AVG Anti-Virus 2012 on your computer, you need to get the latest installation file. To make sure you are installing the up-to-date version of AVG Anti-Virus 2012, it is recommended that you download the installation file from the AVG website (http://www.avg.com/). The Support Center / Download section provides a structured overview of the installation files for each AVG edition.
If you are not sure which files you need to download and install, you may want to use the Select product service at the bottom of the web page. After you answer three simple questions, this service defines the exact files you need. Press the Continue button to get redirected to a complete list of download files customized for your personal needs.
What does the installation process look like?
Once you have downloaded and saved the installation file on your hard disk, you can launch the installation process. The installation is a sequence of simple and easy to understand dialogs. Each dialog briefly describes what do at each step of the installation process. We offer a detailed explanation of each dialog window below:
3.1. Welcome: Language Selection
The installation process starts with the Welcome to AVG Installer dialog:
In this dialog you can select the language used for the installation process. Click the combo box to roll down the language menu. Select the desired language, and the installation process will proceed further in the language of your choice.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 7
Attention: At the moment you are only selecting the language of the installation process. The AVG Anti-Virus 2012 application will be installed in the selected language, and in English which is always installed automatically. However, it is possible to have more languages installed and to work with AVG Anti-Virus 2012 in any of these. You will be invited to confirm your full selection of alternative languages in one of following setup dialogs named Custom
Options.
3.2. Welcome: License Agreement
The Welcome to AVG Installer dialog provides then the full wording of the AVG license agreement:
Please read the entire text carefully. To confirm that you have read, understood, and accept the agreement press the Accept button. If you do not agree with the license agreement press the Decline button, and the installation process will be terminated immediately.
AVG Privacy Policy
Besides the license agreement, this setup dialog also offers you the option to learn more about the AVG Privacy Policy and AVG Fair Processing Notice. Click the respective link to get redirected to AVG website (http://www.avg.com/) where you can find the full wording of these statements.
Control buttons
From the first setup dialog, there are only two control buttons available:
Printable version - Click to have printed the full wording of the AVG license agreement. Decline - Click to refuse the license agreement. The setup process will quit immediately.
AVG Anti-Virus 2012 will not be installed!
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 8
Back - Click to return one step back to the previous setup dialog. Accept - Click to confirm you have read, understood, and accepted the license agreement.
The installation will continue, and you will go on one step further to the following setup dialog.
3.3. Activate your license
In the Activate Your License dialog you are invited to enter your license number into the provided text field:
Where to find the license number
The sales number can be found on the CD packaging in your AVG Anti-Virus 2012 box. The license number will be in the confirmation email that you received after purchasing your AVG Anti-Virus 2012 online. You must type in the number exactly as shown. If the digital form of the license number is available (in the e-mail), it is recommended that you use the copy and paste method to insert it.
How to use the Copy & Paste method
Using the Copy & Paste method to enter your AVG Anti-Virus 2012 license number into the program ensures that the number is correctly entered. Please follow these steps:
Open the e-mail containing your license number. Click the left mouse button at the beginning of the license number, hold and drag the
mouse to the end of the number, and then release the button. The number should now be highlighted.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 9
Press and hold Ctrl,and then press C. This copies the number. Point and click the position where you would like to paste the copied number. Press and hold Ctrl,and then press V. This pastes the number to the location you selected.
Control buttons
As in most setup dialogs, there are three control buttons available:
Cancel - click to exit the setup process immediately; AVG Anti-Virus 2012 will not be installed!
Back - click to go one step back to the previous setup dialog. Next - click to continue the installation and go one step further.
3.4. Select type of installation

The Select type of installation dialog offers the choice of two installation options: Express and Custom Install:

Express installation
For most users, it is highly recommended that you keep the standard Express installation. This way you install AVG Anti-Virus 2012 in fully automatic mode with settings predefined by the program vendor, including the AVG Gadget, the AVG Security Toolbar, and having configured the AVG Secure Search as the default search provider. This configuration provides maximum security
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 10
combined with the optimal use of resources. In the future, if the need arises to change the configuration, you will always have the option of doing so directly in the AVG Anti-Virus 2012 application.
Press the Next button to proceed to the following dialog of the installation process.
Custom installation
Custom Install should only be used by experienced users who have a valid reason to install AVG Anti-Virus 2012 with non-standard settings; e.g. to fit specific system requirements. In this section
you can decide whether the following features should be installed (both features are marked as to be installed, and will be installed automatically unless you opt-out):
Sets, keeps and protects AVG Secure Search as your default search provider - keep checked to confirm you want to use the AVG Secure Search engine that closely cooperates with the Link Scanner component for your maximum security online.
Installs the AVG Security Toolbar to protect your computer from dangerous websites ­keep checked to have installed AVG Security Toolbar that guards your maximum security while browsing the Internet.
If you decide for this option, a new section called Destination Folder appears in the dialog. Here, you are supposed to specify the location where AVG Anti-Virus 2012 should be installed. By default, AVG Anti-Virus 2012 will be installed to the program files folder located on drive C:, as stated in the text field in the dialog. If you want to change this location, use the Browse button to display the drive structure, and select the respective folder. To revert to the default destination pre­set by the software vendor use the Default button.
Then, press the Next button to proceed to the Custom Options dialog.
Control buttons
As within most setup dialogs, there are three control buttons available:
Cancel - click to exit the setup process immediately; AVG Anti-Virus 2012 will not be installed!
Back - click to go one step back to the previous setup dialog. Next - click to continue the installation and go one step further.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 11
3.5. Custom options
The Custom Options dialog allows you to set up detailed parameters for the installation:
The Component Selection section provides an overview of all AVG Anti-Virus 2012 components that can be installed. If the default settings do not suit you, you can remove/add specific components.
However, you can only select from components that are included in your purchased AVG edition!
Highlight any item in the Component Selection list, and a brief description of the respective component will be displayed on the right side of this section. For detailed information on each component's functionality please consult the Components Overview chapter of this documentation. To revert to the default configuration pre-set by the software vendor use the Default button.
Control buttons
As in most setup dialogs, there are three control buttons available:
Cancel - click to exit the setup process immediately; AVG Anti-Virus 2012 will not be installed!
Back - click to go one step back to the previous setup dialog. Next - click to continue the installation and go one step further.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 12
3.6. Install progress
The Install Progress dialog shows the progress of the installation process, and does not require any intervention:
After the installation process is finished, you will be automatically redirected to the next dialog.
Control buttons
There are two control buttons available in this dialog:
Minimize - The installation process may take several minutes. Click the button to minimize the dialog window into an icon visible on the system bar. The dialog appears again once the installation is completed.
Cancel - This button should only be used if you want to stop the current installation process. Please mind that in such a case your AVG Anti-Virus 2012 will not be installed!
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 13
3.7. Installation was successful
The Installation was successful dialog confirms that your AVG Anti-Virus 2012 has been fully installed and configured:
Product Improvement Program and Privacy Policy
Here you can decide whether you want to participate in the Product Improvement Program (for details see the chapter AVG Advanced Settings / Product Improvement Program) that collects
anonymous information on detected threats in order to increase the overall Internet security level. All data are treated as confidential and in compliance with AVG Privacy Policy; click the Privacy Policy link to get redirected to AVG website (http://www.avg.com/) where you can find the the full wording of AVG Privacy Policy. If you agree, please keep the option checked (the option is confirmed, by default).
To finalize the installation process press the Finish button.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 14
4. After Installation
4.1. Product registration
Having finished the AVG Anti-Virus 2012 installation, please register you product online on the AVG website (http://www.avg.com/). After the registration you will be able to gain full access to your AVG user account, the AVG Update newsletter, and other services provided exclusively for registered users.
The easiest way to register is directly from the AVG Anti-Virus 2012 user interface. In the main menu please select the Help/Register now item. You will be redirected to the Registration page on the AVG website (http://www.avg.com/). Please follow the instruction provided on the page.
4.2. Access to user interface
The AVG main dialog is accessible in several ways:
double-click the AVG system tray icon double-click the AVG icon on the desktop from the menu Start / All Programs / AVG 2012
4.3. Scanning of the whole computer
There is a potential risk that a computer virus has been transmitted to your computer prior to AVG Anti-Virus 2012 installation. For this reason you should run a Scan of the whole computer to make
sure there are no infections on your PC. The first scan might take quite some time (about an hour) but it is recommended that you launch it to make sure your computer has not been compromised by a threat. For instructions on running a Scan of the whole computer consult the chapter AVG
Scanning.
4.4. Eicar test
To confirm that AVG Anti-Virus 2012 has been installed correctly you can perform the EICAR test. The EICAR test is a standard and absolutely safe method used to test antivirus system operation. It
is safe to pass around, because it is not an actual virus, and does not include any fragments of viral code. Most products react to it as if it were a virus (though they typically report it with an obvious name, such as "EICAR-AV-Test"). You can download the EICAR virus from the EICAR website at
www.eicar.com, and you will also find all necessary EICAR test information there.
Try to download the eicar.com file, and save it on your local disk. Immediately after you confirm downloading of the test file, the Online Shield (a part of LinkScanner component) will react to it with a warning. This notice demonstrates that AVG is correctly installed on your computer.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 15
From the http://www.eicar.com website you can also download the compressed version of the EICAR 'virus' (e.g. in the form of eicar_com.zip). Online Shield allows you to download this file and save it on your local disk but then the Resident Shield (within Anti-Virus component) detects the 'virus' as you try to unpack it.
If AVG fails to identify the EICAR test file as a virus, you should check the program configuration again!
4.5. AVG default configuration
The default configuration (i.e. how the application is set up right after installation) of AVG Anti-Virus 2012 is set by the software vendor so that all components and functions are tuned up to achieve
optimum performance.
Unless you have a real reason to do so, do not change the AVG configuration! Changes to settings should only be performed by an experienced user.
Some minor editing of AVG components settings is accessible directly from the specific component user interface. If you want to change the AVG configuration to better suit your needs, go to AVG
Advanced Settings: select the system menu item Tools/Advanced settings and edit the AVG
configuration in the newly opened AVG Advanced Settings dialog.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 16
5. AVG User Interface
AVG Anti-Virus 2012 opens with the main window:
The main window is divided into several sections:
System Menu (top system line in the window) is the standard navigation that allows you to access all components, services, and features of AVG Anti-Virus 2012 - details >>
Security Status Info (upper section of the window) provides you with information on the current status of your AVG Anti-Virus 2012 - details >>
Join us on Facebook (upper right-hand section of the window) button allows you to join the AVG community on Facebook. However, the button only appears in case all components are fully functional and working properly (for details on how to recognize the
status of AVG components see chapter Security Status Info)
Quick Links (left section of the window) allow you to quickly access the most important and most frequently used tasks of AVG Anti-Virus 2012 - details >>
My Apps (left bottom section of the window) open an overview of additional applications available for AVG Anti-Virus 2012: LiveKive, Family Safety, and PC Tuneup
Components Overview (central section of the window) offers an overview of all components installed within AVG Anti-Virus 2012 - details >>
System Tray Icon (bottom right corner of the monitor, on the system tray) indicates the current status of AVG Anti-Virus 2012 - details >>
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 17
AVG gadget (Windows sidebar, supported in Windows Vista/7) allows quick access to scanning and updating within AVG Anti-Virus 2012 - details >>
5.1. System Menu
The System menu is the standard navigation used in all Windows applications. It is located horizontally in the very top part of the AVG Anti-Virus 2012 main window. Use the system menu to access specific AVG components, features, and services.
The system menu is divided into six main sections:
5.1.1. File
Exit - closes the AVG Anti-Virus 2012 user interface. However, the AVG application will continue running in the background and your computer will still be protected!
5.1.2. Components

The Components item of the system menu includes links to all installed AVG components, opening their default dialog page in the user interface:

System overview - switch to the default user interface dialog with the overview of all
installed components and their status
Anti-Virus detects viruses, spyware, worms, trojans, unwanted executable files or libraries within your system, and protects you from malicious adware - details >>
LinkScanner protects you from web-based attacks while you search and surf the Internet -
details >>
E-mail Protection checks your incoming e-mail messages for SPAM, and blocks viruses, phishing attacks, or other threats - details >>
Anti-Rootkit scans for dangerous rootkits hidden inside applications, drivers, or libraries -
details >>
PC Analyzer provides information about your computer status - details >> Identity Protection is constantly protecting your digital assets from new and unknown
threats - details >> Remote Administration is only displayed within AVG Business Editions in case you have
specified during the installation process you want to have this component installed
5.1.3. History
Scan results - switches to the AVG testing interface, specifically to the Scan Results Overview dialog
Resident Shield detection - opens a dialog with an overview of threats detected by Resident Shield
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 18
E-mail Scanner detection - opens a dialog with an overview of mail messages attachments
detected as dangerous by the E-mail Protection component
Online Shield findings - opens a dialog with an overview of threats detected by Online Shield
service within the LinkScanner component
Virus Vault - opens the interface to the quarantine space (Virus Vault) to where AVG
removes all detected infections that cannot be healed automatically for some reason. Inside this quarantine the infected files are isolated, your computer's security is guaranteed, and at the same time the infected files are stored for possible future repair
Event history log - opens the history log interface with an overview of all logged AVG Anti-
Virus 2012 actions
5.1.4. Tools
Scan computer - launches a scan of the whole computer. Scan selected folder... - switches to the AVG scanning interface and allows you to define
within the tree structure of your computer which files and folders should be scanned. Scan file... - allows you to run an on-demand test on a single specific file. Click this option
to open a new window with the tree structure of your disk. Select the desired file, and confirm the scan launch.
Update - automatically launches the update process for AVG Anti-Virus 2012.
Update from directory... - runs the update process from the update files located in a specified folder on your local disk. However, this option is only recommended as an emergency, e.g. in situations where there is no connection to the Internet (for example, your
computer is infected and disconnected from the Internet; your computer is connected to a network with no access to the Internet, etc.). In the newly opened window select the folder
where you have previously placed the update file, and launch the update process.
Advanced settings... - opens the AVG advanced settings dialog where you can edit the
AVG Anti-Virus 2012 configuration. Generally, it is recommended that you keep the default settings of the application as defined by the software vendor.
5.1.5. Help
Contents - opens the AVG help files Get Support - opens the AVG website (http://www.avg.com/) at the customer support
center page
Your AVG Web - opens the AVG website (http://www.avg.com/) About Viruses and Threats - opens the online Virus Encyclopedia where you can look up
detailed information on the identified virus Reactivate - opens the Activate AVG dialog with the data you have entered in the
Personalize AVG dialog of the installation process. Within this dialog you can enter your
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 19
license number to either replace the sales number (you have installed AVG with), or to replace the old license number (e.g. when upgrading to a new AVG product).
Register now - connects to the registration page of the AVG website (http://www.avg.com/). Please fill in your registration data; only customers who register their AVG product can receive free technical support.
Note: If using the trial version of AVG Anti-Virus 2012, the latter two items appear as Buy now and Activate, allowing you to buy the full version of the program right away. For AVG Anti-Virus 2012 installed with a sales number, the items display as Register and Activate.
About AVG - opens the AVG Information dialog with four tabs providing data on your
purchased license and accessible support, product and program information, and the full wording of the license agreement.
5.1.6. Support

The Support link opens a new AVG Information dialog with all types of information you might need when trying to find help. The dialog includes basic data on your installed AVG program (program/ database version), license details, and a list of quick support links. The AVG Information dialog is divided into four tabs:

The License and Support tab provides information on the product name (type of licence, and number of seats), the license number, and the expiration date:
Control buttons and links
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 20
You will find the following buttons and hyperlinks in the tab:
(Re)Activate - Click the button to open the new AVG Activate Software dialog. Fill in your license number into the respective field to either replace your sales number (that you use during the AVG Anti-Virus 2012 installation), or to change your current license number for another (e.g. when upgrading to a higher AVG product).
Copy to clipboard - Use this link to copy the license number, and paste it where needed. This way you can be sure the license number is entered correctly.
Renew now - We recommend that you purchase your AVG Anti-Virus 2012 license renewal in good time, at least one month prior to your current license expiration. You will be noticed of the approaching expiration date. Click this link to get redirected to AVG website (http://www.avg.com/) where you find detailed information on your license status, the expiration date, and the renewal/upgrade offer.
The Product Information tab provides an overview of the AVG Anti-Virus 2012 most important technical data:
The tab is divided into several sections:
Product information - provides information on the AVG Anti-Virus 2012 version, the virus database version, the LinkScanner version, and the AVG Security Toolbar version.
Installed components - provides a complete list of all currently installed components. Installed e-mail protection - offers an overview of all installed e-mail protection plug-ins.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 21
System information - lists all relevant parameters of your operating system (processor type, operating system and its version, build number, service packs used, total memory size, and free memory size).
On the Program tab you can find information on the AVG Anti-Virus 2012 program file version, and on the third parties code used in the product:
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 22
On the License Agreement tab you can read the full wording of the license agreement between you and AVG Technologies:
5.2. Security Status Info
The Security Status Info section is located in the upper part of the AVG Anti-Virus 2012 main window. Within this section you will always find information on the current security status of your AVG Anti-Virus 2012. Please see an overview of icons possibly depicted in this section, and their meaning:
- the green icon indicates that your AVG Anti-Virus 2012 is fully functional. Your computer is completely protected, up-to-date, and all installed components are working properly.
- the yellow icon warns that one or more components are incorrectly configured and you should check their properties/settings. There is no critical problem in AVG Anti-Virus 2012 and you have probably decided to switch a component off for some reason. You are still protected!. However, please pay attention to the problem component's settings! Its name will be provided in the Security Status Info section.
The yellow icon also appears if for some reason you have decided to ignore a component's error status. The Ignore component state option is available from the context menu (opened by your mouse right-click) over the respective component's icon in the component overview of
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 23
the AVG Anti-Virus 2012 main window. Select this option to state you are aware of the component's error state but for some reason you wish to keep your AVG Anti-Virus 2012 so and you do not want to be warned by the system tray icon. You may need to use this option in a specific situation but it is strictly recommended that you switch off the Ignore component state option as soon as possible.
Alternatively, the yellow icon will also be displayed if your AVG Anti-Virus 2012 requires a computer restart (Restart needed). Please pay attention to this warning and restart your PC using the Restart now button.
- the orange icon indicates that AVG Anti-Virus 2012 has a critical status! One or more components does not work properly and AVG Anti-Virus 2012 cannot protect your computer. Please pay immediate attention to fixing the reported problem. If you are not able to fix the error yourself, contact the AVG technical support team.
In case AVG Anti-Virus 2012 is not set to the optimum performance, a new button named Fix (alternatively Fix all if the problem involves more than one component) appears next to the security status information. Press the button to launch an automatic process of checking and configuring the program. This is an easy way to set AVG Anti-Virus 2012 to the optimum performance and reach the maximum security level!
It is strongly recommended that you pay attention to Security Status Info and if the report indicates any problem, go ahead and try to solve it immediately. Otherwise your computer is at risk!
Note: AVG Anti-Virus 2012 status information can also be obtained at any time from the system
tray icon.
5.3. Quick Links
Quick links are located on the left side of AVG Anti-Virus 2012 user interface. These links allow you to immediately access the most important and most frequently used features of the application, i.e. scanning and update. The quick links are accessible from all dialogs of the user interface:

Quick links are graphically divided into three sections:

Scan now - by default, the button provides information on the last scan launched (i.e. the
scan type, and the date of last launch). Click the Scan now command to launch the same scan again. If you want to launch another scan, click the Scan options link. This is how you open the AVG scanning interface where you can run scans, schedule scans, or edit
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 24
their parameters. (For details see chapter AVG Scanning) Scan options - use this link to switch from any currently opened AVG dialog to the default
window with an overview of all installed components. (For details see chapter Components
Overview)
Update now - the link provides the date and time of the update last launch. Press the button to run the update process immediately, and to follow its progress. (For details see
chapter AVG Updates)
Quick links are accessible from AVG User Interface at all times. Once you use a quick link to run a specific process, either a scan or an update, the application will switch to a new dialog but the quick links are still available. Moreover, the running process is also graphically depicted in the navigation, so that you have a full control over all launched processes running within AVG Anti-Virus 2012 at the moment.
5.4. Components Overview
Components Overview sections
The Components Overview section is located in the central part of your AVG Anti-Virus 2012 user
interface. The section is divided into two parts:
Overview of all installed components consisting of graphic panels for all installed components. Each panel is labeled by the component's icon and providing information on whether the respective component is active or inactive at the moment.
Component's description is located in the bottom part of this dialog. The description briefly explains the component's basic functionality. It also provides the information on the current status of the selected component.
Installed components' list
Within the AVG Anti-Virus 2012 the Components Overview section contains information on the following components:
Anti-Virus detects viruses, spyware, worms, trojans, unwanted executable files, or libraries within your system, and protects you from malicious adware - details >>
LinkScanner protects you from web-based attacks while you search and surf the Internet -
details >>
E-mail Protection checks your incoming e-mail messages for SPAM, and blocks viruses, phishing attacks, or other threats - details >>
Anti-Rootkit scans for dangerous rootkits hidden inside applications, drivers, or libraries -
details >>
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 25
PC Analyzer analyzer provides information about your computer status - details >> Identity Protection is constantly protecting your digital assets from new and unknown
threats - details >> Remote Administration is only displayed within AVG Business Editions in case you have
specified during the installation process you want to have this component installed
Actions accessible
Move mouse over any component's icon to highlight it within the components overview. At the same time, the component's basic functionality description appears in the bottom part of the user interface.
Single-click any component's icon to open the component's own interface with a list of basic statistical data.
Right-click you mouse over a component's icon to expand a context menu with several options:
o Open - Click this option to open the component's own dialog (just like a single-click
on the component's icon).
o Ignore the state of this component - Select this option to express you are aware of

the component's error state but for some reason you wish to keep this status, and you do not want to be warned by the system tray icon.

o Open in Advanced settings ... - This option is only available for some components;
i.e. those that provide the option of advanced settings.
5.5. System Tray Icon
The AVG System Tray Icon (on your Windows taskbar, right-hand bottom corner of your monitor) indicates the current status of your AVG Anti-Virus 2012. It is visible at all times in your system tray, no matter whether the user interface of your AVG Anti-Virus 2012 is opened or closed:
AVG System Tray Icon display
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 26
In full color with no added elements the icon indicates that all AVG Anti-Virus 2012 components are active and fully functional. However, the icon can also be displayed this way in a situation when one of the components is not fully functional but the user has decided to ignore the component state. (Having confirmed the ignore for component state
option you express, you are aware of the component's error state but for some reason you wish to keep it so, and you do not want to be warned about the situation.)
The icon with an exclamation mark indicates that a component (or even more components) is in error state. Always pay attention to such a warning and try to remove the
configuration issue for a component that is not set up properly. In order to be able to perform the changes in the component's configuration, double-click the system tray icon to open the application user interface. For detailed information on which components is in error
state please consult the security status info section.
The system tray icon can further be displayed in full color with a flashing and rotating beam of light. This graphic version signalizes a currently launched update process.
The alternative display of a full color icon with an arrow means that one of the AVG Anti-
Virus 2012 scans is running now.
AVG System Tray Icon information
The AVG System Tray Icon also informs about current activities within your AVG Anti-Virus 2012, and on possible status changes in the program (e.g. automatic launch of a scheduled scan or update, a component's status change, error status occurrence, ...) via a pop-up window opened from the system tray icon:
Actions accessible from AVG System Tray Icon
AVG System Tray Icon can also be used as a quick link to access the user interface of AVG Anti- Virus 2012; just double-click the icon. By right-click the icon you open a brief context menu with the
following options:
Open AVG User Interface - click to open the user interface of AVG Anti-Virus 2012. Temporarily disable AVG protection - the option allows you to switch off the entire
protection secured by your AVG Anti-Virus 2012 at once. Please remember that you should not use this option unless it is absolutely necessary! In most cases, it is not necessary to disable AVG Anti-Virus 2012 before installing new software or drivers, not even if the installer or software wizard suggests that running programs and applications be shut down first to make sure there are no unwanted interruptions during the installation process. If you do have to temporarily disable AVG Anti-Virus 2012, you should re-enable it as soon as you're done. If you are connected to the Internet or a network during the time your antivirus software is disabled, your computer is vulnerable to attacks..
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 27
Scans - click to open the context menu for predefined scans (Whole Computer scan, and
Scan Specific Files or Folders) and select the required scan; it will be launched
immediately. Running scans ... - this item is displayed only if a scan is currently running on your
computer. For this scan you can then set its priority, alternatively stop or pause the running scan. The following actions are also accessible: Set priority for all scans, Pause all scans or Stop all scans.
Run PC Analyzer - click to launch the PC Analyzer component. Update now - launches an immediate update. Help - opens the help file on the start page.
5.6. AVG Advisor
AVG Advisor has been designed to detect problems that might be slowing your computer down, or putting it at risk, and to recommend an action to solve the situation. If you see a sudden computer slowdown (Internet browsing, overall performance), it is not usually obvious what exactly the culprit is, and subsequently, how to solve the problem. That is where AVG Advisor comes in: It will display a notification in the system tray informing you what the problem might be, and suggesting how to fix it. AVG Advisor keeps monitoring all running processes within your PC for possible issues, and offering tips on how to avoid the problem.

AVG Advisor is visible in the form of a sliding pop-up over the system tray:

Specifically, AVG Advisor monitors the following:
The state of any currently opened web browser. Web browsers may overload the memory, especially if multiple tabs or windows have been opened for some time, and consume too much of system resources, i.e. slowing down your computer. In such situation, restarting the web browser usually helps.
Running Peer-To-Peer connections. After using the P2P protocol for sharing files, the connection can sometimes remain active, using up certain amount of your bandwidth. As a result, you can see web browsing slowdown.
Unknown network with a familiar name. This usually only applies to users who connect to various networks, typically with portable computers: If a new, unknown network has the same name as a well-known, frequently used network (e.g. Home or MyWifi), confusion can
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 28
occur, and you can accidentally connect to a completely unknown and potentially unsafe network. AVG Advisor can prevent this by warning you that the known name actually represents a new network. Of course, if you decide that the unknown network is safe, you can save it to an AVG Advisor list of known networks so that it is not reported again in the future.
In each of these situation, AVG Advisor warns you of the possible problem that might occur, and it provides the name and icon of the conflicting process, or application. Also, AVG Advisor suggests what steps should be taken to avoid the possible problem.
Supported web browsers
The feature works with the following web browsers: Internet Explorer, Chrome, Firefox, Opera, Safari.
5.7. AVG Gadget
The AVG gadget is displayed on the Windows desktop (Windows Sidebar). This application is only supported in the operating systems Windows Vista and Windows 7. The AVG gadget offers immediate access to the most important AVG Anti-Virus 2012 function, i.e. scanning and updating:
Quick access to scanning and updating

If needed, the AVG gadget allows you to launch a scan or an update immediately:

Scan now - click the Scan now link to start the whole computer scan directly. You can
watch the progress of the scanning in the alternative user interface of the gadget. A brief statistical overview provides information on the number of scanned objects, threats
detected, and threats healed. During the scan you can always pause , or stop the scanning process. For detailed data related to the scan results please consult the standard Scan results overview dialog that can be opened directly from the gadget via the Show details option (the respective scan results will be listed under Sidebar gadget scan).
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 29
Update now - click the Update now link to launch the AVG Anti-Virus 2012 update directly from within the gadget:
Social networks access
AVG gadget also provides a quick link connecting you to the major social networks. Use the respective button to get connected to AVG communities in Twitter, Facebook, or LinkedIn:
Twitter link - opens a new AVG gadget interface providing an overview of the latest AVG feeds posted to Twitter. Follow the View all the AVG Twitter feeds link to open your Internet browser in a new window, and you will be redirected directly to the Twitter website, specifically to the page devoted to AVG news:
Facebook link - opens your Internet browser to the Facebook website, specifically on the AVG community page.
LinkedIn - this option is only available within the network installation (i.e. provided that you have installed AVG using one of the AVG Business Editions licenses), and it opens
your Internet browser on AVG SMB Community website within LinkedIn social network.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 30
Other features accessible via gadget
PC Analyzer - opens the user interface in the PC Analyzer component, and starts the analysis right away.
Search box - type in a keyword and get the search results immediately in a newly opened window with your default web browser.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 31
6. AVG Components
6.1. Anti-Virus
The Anti-Virus component is a cornerstone of your AVG Anti-Virus 2012 and it combines several fundamental features of a security program:
Scanning Engine Resident Protection Anti-Spyware Protection
6.1.1. Scanning Engine
The scanning engine which is the base of the Anti-Virus component scans all files and file activity (opening/closing files, etc.) for known viruses. Any detected virus will be blocked from taking any action and will then be cleaned or quarantined in the Virus Vault.
The important feature of AVG Anti-Virus 2012 protection is that no known virus can run on the computer!
Detection methods

Most antivirus software also uses heuristic scanning, where files are scanned for typical virus characteristics, so-called viral signatures. This means that the antivirus scanner can detect a new, unknown virus, if the new virus contains some typical characteristics of existing viruses. Anti-Virus uses the following detection methods:

Scanning - searching for character strings that are characteristic of a given virus Heuristic analysis - dynamic emulation of the scanned object’s instructions in a virtual
computer environment Generic detection - detection of instructions characteristic of the given virus/group of viruses
Where just a single technology might fall short of detecting or identifying a virus, Anti-Virus combines several technologies to ensure that your computer is protected from viruses. AVG Anti- Virus 2012 is also able to analyze and detect executable applications or DLL libraries that could be potentially unwanted within the system. We call such threats Potentially Unwanted Programs (various kinds of spyware, adware etc.). Furthermore, AVG Anti-Virus 2012 scans your system registry for suspicious entries, temporary Internet files, and tracking cookies, and allows you to treat all potentially harmful items in the same way as any other infection.
AVG Anti-Virus 2012 provides non-stop protection for your computer!
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 32
6.1.2. Resident Protection
AVG Anti-Virus 2012 gives you continuous protection in the form of so-called resident protection. The Anti-Virus component scans every single file (with specific extensions or without extensions at all) that is being opened, saved, or copied. It guards the system areas of the computer, and removable media (flash disk etc.). In case a virus is discovered in a file that is accessed, it stops the operation currently being performed and does not allow the virus to activate itself. Normally, you do not even notice the process, as the resident protection runs "in the background". You only get notified when threats are found; at the same time, Anti-Virus blocks the activation of the threat and removes it.
Resident protection is loaded in the memory of your computer during startup, and it is vital that you keep it switched on at all times!
6.1.3. Anti-Spyware Protection
Anti-Spyware consists of a spyware database used for identifying known types of spyware definitions. AVG spyware experts work hard to identify and describe the latest spyware patterns as soon as they emerge, and then add the definitions to the database. Via the update process, these new definitions are downloaded to your computer so that you are always reliably protected even against the latest spyware types. Anti-Spyware allows you to fully scan your computer for malware/ spyware. It also detects sleeping and non-active malware, i.e. malware that has been downloaded but not yet activated.
What is spyware?
Spyware is usually defined as a type of malware, i.e. software, that gathers information from a user's computer without the user's knowledge or consent. Some spyware applications may also be installed on purpose and often contain advertisements, window pop-ups, or different types of unpleasant software. Currently, the most common source of infection is websites with potentially dangerous content. Other methods of transmission, such as via e-mail or transmission by worms and viruses, are also prevalent. The most important protection is to use an always-on background scanner, Anti-Spyware, which works like a resident shield and scans your applications in the background as you run them.
6.1.4. Anti-Virus Interface
The Anti-Virus component's interface provides brief information on the component's functionality, information on the component's current status (Active), and basic configuration options for the component:
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 33
Configuration options
The dialog provides some elementary configuration options for features available within the Anti­Virus component. You can find a brief description of these below:
View an online report for how AVG has protected you - the link redirects you to a
specific page on the AVG website (http://www.avg.com/). On the page you can find a detailed statistical overview of all AVG Anti-Virus 2012 activities performed on your computer within a specified period of time and in total.
Enable Resident Shield - this option allows you to easily switch resident protection on/off. Resident Shield scans files as they are copied, opened, or saved. When a virus or any kind of threat is detected, you will be warned immediately. By default, the function is on, and it is recommended that you keep it so! With resident protection on you can also decide how an detected infections should be treated:
o Ask me before removing threats - keep the option checked to confirm you want to
be asked whenever a threat is detected before it is removed to the Virus Vault. This choice has no impact on the security level, and it only reflects your preferences.
o Scan for Tracking Cookies - independently of the previous options, you can decide
whether you want to scan for tracking cookies. (Cookies are parcels of text sent by a
server to a web browser and then sent back unchanged by the browser each time it accesses that server. HTTP cookies are used for authenticating, tracking, and maintaining specific information about users, such as site preferences or the contents of their electronic shopping carts.) In specific cases you can switch this
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 34
option on to achieve maximum security levels, however it is switched off by default.
o Enable Instant Messaging and P2P downloads protection - check this item if you
wish to verify that the instant messaging communication (e.g. ICQ, MSN Messenger, ...) is virus free.
Advanced settings... - click the link to get redirected to the respective dialog within the
Advanced settings of AVG Anti-Virus 2012. There you can edit the component's
configuration in detail. However, please note that the default configuration of all components is set up so that AVG Anti-Virus 2012 provides optimum performance, and maximum security. Unless you have a real reason to do so, it is recommended that you keep the default configuration!
Control buttons
Within the dialog you may use the following control buttons:
Manage exceptions - opens a new dialog named Resident Shield - Exceptions. The configuration of exceptions from Resident Shield scanning is also accessible from the main menu, following the sequence Advanced settings / Anti-Virus / Resident Shield /
Exceptions (please see the respective chapter for detailed descriptions). Within the dialog
you may specify files and folders that should be excluded from the Resident Shield scanning. If this is not essential, we strongly recommend not excluding any items! The dialog provides the following control buttons:
o Add Path – specify a directory (or directories) to be excluded from the scanning by
selecting them one by one from the local disk navigation tree.
o Add File – specify files to be excluded from the scanning by selecting them one by
one from the local disk navigation tree.
o Edit Item – allows you to edit the specified path to a selected file or folder.
o Remove Item – allows you to delete the path to a selected item from the list.
o Edit List - allows you to edit the entire list of defined exceptions in a new dialog that
behaves like a standard text editor.
Apply - saves all changes to the component's settings performed in this dialog, and returns to the main user interface of AVG Anti-Virus 2012 (components overview).
Cancel - cancels all changes to the component's settings performed in this dialog. No changes will be saved. You will return to the main user interface of AVG Anti-Virus 2012 ( components overview).
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 35
6.1.5. Resident Shield Detections
Resident Shield scans files as they are copied, opened, or saved. When a virus or any kind of threat is detected, you will be warned immediately via the following dialog:
Within this warning dialog you will find data on the file that was detected and assigned as infected ( File name), the name of the recognized infection (Threat name), and a link to the Virus encyclopedia where you can find detailed information on the detected infection, if known (More info).
You also have to decide what action should be taken now. Several alternative options are available.
Please note that, depending upon specific conditions (what kind of file is infected, and where it is located), not all of the options are always available!
Heal - this button only appears if the detected infection can be healed. Then, it removes it
from the file, and restores the file to the original state. If the file itself is a virus, use this function to delete it (i.e. removed to the Virus Vault)
Move to Vault (Recommended) - the virus will be moved to the Virus Vault Go to file - this option redirects you to the exact location of the suspicious object (opens
new Windows Explorer window)
Ignore the threat - we strictly recommend NOT using this option unless you have a very good reason to do so!
Note: It may happen that the size of the detected object exceeds the free space limit in the Virus Vault. If so, a warning message pops up informing you about the issue as you try to move the infected object to the Virus Vault. However, the Virus Vault size can be modified. It is defined as an adjustable percentage of the real size of your hard disk. To increase the size of your Virus Vault, go to the Virus Vault dialog within the AVG Advanced Settings, via the 'Limit Virus Vault size' option.
In the bottom section of the dialog you can find the Show details link - click it to open a pop-up window with detailed information on the process running while the infection was detected, and the process' identification.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 36
Resident Shield detections overview
The entire overview of all threats detected by Resident Shield can be found in the Resident Shield detection dialog accessible from the system menu option History / Resident Shield detection:
The Resident Shield detection offers an overview of objects that were detected by the Resident
Shield, evaluated as dangerous, and either cured or moved to the Virus Vault. For each detected
object the following information is provided:
Infection - description (possibly even name) of the detected object Object - object location Result - action performed with the detected object Detection time - date and time the object was detected Object Type - type of the detected object Process - what action was performed to call up the potentially dangerous object so that it
could be detected
In the bottom part of the dialog, below the list, you will find information on the total number of detected objects listed above. You can also export the entire list of detected objects in a file (Export list to file) and delete all entries on detected objects (Empty list). The Refresh list button will update the list of finding detected by Resident Shield. The Back button switches you back to the
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 37
default AVG main dialog (components overview).
6.2. Link Scanner
LinkScanner protects you from the increasing number of ‘here today, gone tomorrow’ threats on the web. These threats can be hidden on any type of website, from governments to big, well-known brands to small businesses, and they rarely stick around on those sites for more than 24 hours. LinkScanner protects you by analyzing the web pages behind all the links on any web page you’re viewing and making sure they’re safe at the only time that matters – when you’re about to click that link.

LinkScanner Supports the following search engines: Google Search, Yahoo Search, Bing Search.

LinkScanner is not intended for server platforms protection!
The LinkScanner technology consists of the following main features:
Surf-Shield scans the contents of the websites you are visiting, regardless of the websites
address.
Online Shield works as a real-time protection when surfing the Internet. It scans the
contents of visited web pages, and possible files included in them, even before these are displayed in your web browser or downloaded to your computer. Online Shield detects viruses and spyware contained in the page you are about to visit and stops the download instantly so that no threats ever get to your computer.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 38
6.2.1. Link Scanner Interface
The LinkScanner component main dialog provides a brief description of the component's functionality and information on its current status (Active):
In the bottom part of the dialog basic configuration options for the component are available:
Enable Surf-Shield - (on by default): Active (real-time) protection against exploitive sites as they are accessed. Known malicious site connections and their exploitive content is blocked as they are accessed by the user via a web browser (or any other application that uses HTTP).
Enable Online Shield - (on by default): Real-time scanning of the web pages you are about to visit for possible viruses or spyware. If these are detected, the download stops immediately so that no threats ever get to your computer.
6.2.2. Surf-Shield detections
This powerful protection will block malicious content of any web page you try to open, and prevent it from being downloaded to your computer. With this feature enabled, clicking a link or typing in a URL to a dangerous site will automatically block you from opening the web page thus protecting you from inadvertently being infected. It is important to remember that exploited web pages can infect your computer simply by visiting the affected site, for this reason when you request a dangerous web page containing exploitation or other serious threats, the LinkScanner will not allow your browser to display it.
If you do encounter a malicious web site, within your web browser the LinkScanner will warn you with a screen similar to:
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 39
Entering such website is highly risky and cannot be recommended!
6.2.3. Online Shield detections
Online Shield scans the content of visited web pages and possible files included in them even before these are displayed in your web browser or downloaded to your computer. If a threat is detected, you will be warned immediately with the following dialog:
Within this warning dialog you will find data on the file that was detected and assigned as infected ( File name), the name of the recognized infection (Threat name), and a link to the Virus encyclopedia where you can find detailed information on the detected infection (if known). The dialog provides the following buttons:
Show details - click the Show details button to open a new pop-up window where you can find information on the process running while the infection was detected, and the process' identification.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 40
Close - click the button to close the warning dialog.
The suspicious web page will not be opened, and the threat detection will be logged in the list of Online Shield findings - this overview of detected threats is accessible via the system menu
History / Online Shield findings.
For each detected object the following information is provided:
Infection - description (possibly even name) of the detected object Object - object source (web page) Result - action performed with the detected object Detection time - date and time the threat was detected and blocked Object Type - type of the detected object Process - what action was performed to call up the potentially dangerous object so that it
could be detected
In the bottom part of the dialog, below the list, you will find information on the total number of detected objects listed above. You can also export the entire list of detected objects in a file (Export list to file) and delete all entries on detected objects (Empty list).
Control buttons
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 41
Refresh list - update the list of findings detected by Online Shield Back - switch back to the default AVG main dialog (components overview)
6.3. E-mail Protection
One of the most common sources of viruses and trojans is via e-mail. Phishing and spam make e­mail an even greater source of risks. Free e-mail accounts are more likely to receive such malicious e-mails (as they rarely employ anti-spam technology), and home users rely quite heavily on such e- mail. Also home users, surfing unknown sites and filling in online forms with personal data (such as their e-mail address), increase exposure to attacks via e-mail. Companies usually use corporate e­mail accounts and employ anti-spam filters etc, to reduce the risk.
The E-mail Protection component is responsible for scanning every e-mail message sent or received; whenever a virus is detected in an e-mail, it is removed to the Virus Vault immediately. The component can also filter out certain types of e-mail attachments, and add a certification text to infection-free messages. E-mail Protection consists of two main functions:
E-mail Scanner Anti-Spam
6.3.1. E-mail Scanner
Personal E-mail Scanner scans incoming/outgoing e-mails automatically. You can use it with e­mail clients that do not have their own plug-in in AVG (but can be also used to scan e-mail messages for e-mail clients that AVG supports with a specific plug-in, i.e. Microsoft Outlook). Primarily, it is to be used with e-mail applications such as Outlook Express, Incredimail, etc.
During AVG installation there are automatic servers created for e-mail control: one for checking incoming e-mails and the second one for checking outgoing e-mails. Using these two servers e­mails are automatically checked on ports 110 and 25 (standard ports for sending/receiving e-mails).

E-mail Scanner works as an interface between the e-mail client and e-mail servers on the Internet.

Incoming mail: While receiving a message from the server, the E-mail Scanner
component tests it for viruses, removes infected attachments, and adds certification. When detected, viruses are quarantined in the Virus Vault immediately. Then the message is passed to the e-mail client.
Outgoing mail: The message is sent from the e-mail client to E-mail Scanner; it tests the message and its attachments for viruses and then sends the message to the SMTP server ( scanning of outgoing e-mails is disabled by default, and can be set up manually).
E-mail Scanner is not intended for server platforms!
6.3.2. Anti-Spam
How does Anti-Spam work?
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 42
Anti-Spam checks all incoming e-mail messages and marks unwanted e-mails as spam. Anti- Spam can modify the subject of the email (that has been identified as spam) by adding a special
text string. You can then easily filter your emails in your email client. The Anti-Spam component uses several analysis methods to process each e-mail message, offering maximum possible protection from unwanted e-mail messages. Anti-Spam uses a regularly updated database for the detection of spam. It is also possible to use RBL servers (public databases of "known spammer" email addresses) and to manually add email addresses to your Whitelist (never mark as spam) and Blacklist (always mark as spam).
What is a spam?
Spam refers to unsolicited e-mail, mostly advertising a product or service that is mass mailed to a huge number of e-mail addresses at the same time, filling recipients’ mail boxes. Spam does not refer to legitimate commercial e-mail for which consumers have given their consent. Spam is not only annoying, but also can often be a source of scams, viruses, or offensive content.
6.3.3. E-mail Protection Interface
In the E-mail Protection dialog you can find a brief text describing the component's functionality, and information on its current status (Active). Use the View an online report for how AVG has protected you link to review detailed statistics of AVG Anti-Virus 2012 activities and detections on a dedicated page on the AVG website (http://www.avg.com/).
Basic E-mail Protection settings
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 43
In the E-mail Protection dialog you can also edit some elementary features of the component's functionality:
Scan incoming messages (on by default) - tick the box to specify that all e-mails delivered to your account should be scanned for viruses.
Scan outgoing messages (off by default) - tick the box to confirm all e-mail sent from your account should be scanned for viruses.
Display notification window while e-mail is being scanned (on by default) - mark the item to confirm you want to be informed via a notification dialog displayed over the AVG
icon on the system tray during the scanning of your e-mail.
The software vendor has set up all AVG components to give optimum performance. Unless you have a real reason to do so, do not change the AVG configuration. Any changes to settings should only be performed by an experienced user. If you need to change the AVG configuration, select the system menu item Tools / Advanced settings and edit the AVG configuration in the newly opened AVG Advanced Settings dialog.
The Enable Anti-Spam item activates filtering of unsolicited messages in your incoming e-mail. However, the Anti-Spam service is not available within AVG Anti-Virus 2012, and is only accessible in higher AVG editions. Please visit AVG website (http://www.avg.com/) for AVG upgrade
information.
Control buttons
The control buttons available within the E-mail Protection dialog are as follows:
Save changes - press this button to save and apply any changes made in this dialog Cancel - press this button to return to the default AVG main dialog (components overview)
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 44
6.3.4. E-mail Scanner Detections
In the E-mail Scanner detection dialog (accessible via system menu option History / E-mail Scanner detection) you will be able to see a list of all findings detected by the E-mail Protection
component. For each detected object the following information is provided:
Infection - description (possibly even name) of the detected object Object - object location Result - action performed with the detected object Detection time - date and time the suspicious object was detected Object Type - type of the detected object
In the bottom part of the dialog, below the list, you will find information on total number of detected objects listed above. You can also export the entire list of detected objects in a file (Export list to file) and delete all entries on detected objects (Empty list).
Control buttons
The control buttons available within the E-mail Scanner detection interface are as follows:
Refresh list - updates the list of detected threats.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 45
Back - switches you back to the previously displayed dialog.
6.4. Anti-Rootkit
Anti-Rootkit is a specialized tool detecting and effectively removing dangerous rootkits, i.e. programs and technologies that can camouflage the presence of malicious software on your computer. Anti-Rootkit is able to detect rootkits based on a predefined set of rules. Please note, that all rootkits are detected (not just the infected ones). If Anti-Rootkit finds a rootkit, it does not necessarily mean the rootkit is infected. Sometimes, rootkits are used as drivers or they are a part of correct applications.
What is a rootkit?
A rootkit is a program designed to take fundamental control of a computer system, without authorization by the system's owners and legitimate managers. Access to the hardware is rarely required as a rootkit is intended to seize control of the operating system running on the hardware. Typically, rootkits act to obscure their presence on the system through subversion or evasion of standard operating system security mechanisms. Often they are also Trojans, thus fooling users into believing they are safe to run on their systems. Techniques used to accomplish this can include concealing running processes from monitoring programs, or hiding files or system data from the operating system.
6.4.1. Anti-Rootkit Interface

The Anti-Rootkit dialog provides a brief description of the component's functionality, provides information on the component's current status (Active), and also gives information on the last time

A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 46
the Anti-Rootkit test was launched (Last rootkit search; the rootkit test is a default process running within the Whole Computer Scan). The Anti-Rootkit dialog also provides the Tools/Advanced
Settings link. Use the link to get redirected to the environment for the advanced configuration of the
Anti-Rootkit component.
The software vendor has set up all AVG components to give optimum performance. Unless you have a real reason to do so, do not change the AVG configuration. Any changes to settings should only be performed by an experienced user.
Basic Anti-Rootkit settings
In the bottom part of the dialog you can set up some elementary functions of the rootkit presence scanning. First, mark up the respective check-boxes to specify objects that should be scanned:
Scan applications
Scan drivers
You can also pick the rootkit scanning mode:
Quick rootkit scan - scans all running processes, loaded drivers, and the system folder ( typically c:\Windows).
Full rootkit scan - scans all running processes, loaded drivers, the system folder (typically c:\Windows), plus all local disks (including the flash disk, but excluding floppy disk/CD drives).
Control buttons
Search for rootkits - since the rootkit scan is not an implicit part of the Scan of the whole
computer, you can run the rootkit scan directly from the Anti-Rootkit interface using this
button. Save changes - press this button to save all changes made in this interface and to return to
the default AVG main dialog (components overview). Cancel - press this button to return to the default AVG main dialog (components overview)
without having saved any changes you made.
6.5. PC Analyzer
The PC Analyzer component is able to scan your computer for system problems, and give you a transparent overview of what might be aggravating your computer’s overall performance. In the component's user interface you can see a chart divided into four lines referring to respective categories: registry errors, junk files, fragmentation, and broken shortcuts:
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 47
Registry Errors will give you the number of errors in Windows Registry. As fixing the Registry requires quite advanced knowledge, we do not recommend that you try and fix it yourself.
Junk Files will give you the number of files that can be most likely done without. Typically, these will be many kinds of temporary files, and files in the Recycle Bin.
Fragmentation will calculate the percentage of your hard disk that is fragmented, i.e. used for a long time so that most files are now scattered on different parts of the physical disk. You can use some defragmentation tool to fix this.
Broken Shortcuts will notify you of shortcuts that no longer work, lead to non-existing locations etc.
To start the analysis of your system, press the Analyze now button. You will then be able to watch the analysis progress and its results directly in the chart:
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 48
The results overview provides the number of detected system problems (Errors) divided according to the respective categories tested. The analysis results will also be displayed graphically on an axis in the Severity column.
Control buttons
Analyze now (displayed before the analysis stars) - press this button to launch the immediate analysis of your computer
Fix now (displayed once the analysis is finished) - press the button to get to the AVG website (http://www.avg.com/) at page providing detailed and up-to-date information related to PC Analyzer component
Cancel - press this button to stop the running analysis, or to return to the default AVG main
dialog (components overview) once the analysis is completed
6.6. Identity Protection

Identity Protection is an anti-malware component that protects you from all kinds of malware (

spyware, bots, identity theft, ...) using behavioral technologies and provide zero day protection for new viruses. Identity Protection is focused on preventing identity thieves from stealing your passwords, bank account details, credit card numbers and other personal digital valuables from all kinds of malicious software (malware) that target your PC. It makes sure that all programs running on your PC or in your shared network are operating correctly. Identity Protection spots and blocks suspicious behavior on a continuous basis and protects your computer from all new malware.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 49
Identity Protection gives your computer a realtime protection against new and even unknown threats. It monitors all (including hidden) processes and over 285 different behaviour patterns, and can determine if something malicious is happening within your system. For this reason, it can reveal threats not even yet described in the virus database. Whenever an unknown piece of code comes onto your computer, it is immediately watched for malicious behaviour, and tracked. If the file is found to be malicious, Identity Protection will remove the code into the Virus Vault and undo any changes that have been made to the system (code injections, registry changes, ports opening etc). You do not need to initiate a scan to be protected. The technology is very proactive, rarely needs updating, and is always on guard.
Identity Protection is a complimentary protection to Anti-Virus. We strongly recommend you have the both components installed, in order to have complete protection for your PC!
6.6.1. Identity Protection Interface
The Identity Protection dialog provides a brief description of the component's basic functionality, its status (Active), and some statistical data:
Threat items removed - gives the number of applications detected as malware, and removed
Processes monitored - number of currently running applications that are being monitored by IDP
Behaviors monitored - number of specific actions running within the monitored applications
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 50
Basic Identity Protection settings
In the bottom part of the dialog you can edit some elementary features of the component's functionality:
Activate Identity Protection - (on by default): check to activate the IDP component, and to open further editing options.
In some cases, Identity Protection may report that some legitimate file is suspicious or dangerous. Since Identity Protection detects threats based on their behavior, this usually occurs when some program tries to monitor key presses, install other programs or a new driver is installed on the computer. Therefore please select one of the following options specifying the Identity Protection component's behavior in case of detecting suspicious activity:
o Always prompt - if an application is detected as malware, you will be asked whether
it should be blocked (this option is on by default and it is recommended not to change it unless you have a real reason to do so)
o Automatically quarantine detected threats - all applications detected as malware
will be blocked automatically
o Automatically quarantine known threats - only those applications that are with
absolute certainty detected as malware will be blocked
Advanced settings... - Click the link to get redirected to the respective dialog within the
Advanced settings of AVG Anti-Virus 2012. There you can edit the component's
configuration in detail. However, please note that the default configuration of all components is set up so that AVG Anti-Virus 2012 provides optimum performance, and maximum security. Unless you have a real reason to do so, it is recommended that you keep the default configuration!
Control buttons
The control buttons available within the Identity Protection interface are as follows:
Save changes - press this button to save and apply any changes made in this dialog Cancel - press this button to return to the default AVG main dialog (components overview)
6.7. Remote Administration
The Remote Administration component only displays in the user interface of AVG Anti-Virus 2012 in case you have installed the Business Edition of your product (for information on the license used
for installation please see the Version tab of the Information dialog that can be opened via the
Support system menu item). For detailed description of the component's options and functionality
within the AVG Remote Administration system please refer to the specific documentation dedicated to this topic exclusivity. This documentation is available for download at AVG website (http://www.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 51
avg.com/), in the Support center / Download / Documentation section.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 52
7. My Apps

My Apps dialog (accessible via the My Apps button directly from the AVG main dialog) provides an overview of AVG standalone applications, both already installed on your computer, or ready to be installed, as options:

The dialog is divided into two sections:
Your AVG Apps - provides an overview of all AVG standalone applications that are already installed on your computer;
Get AVG Apps - offers an overview of AVG standalone applications, that you might be interested in. These applications are ready to be installed. The offer changes dynamically based on your license, location, and other criteria. For detailed information on these applications please consult AVG website (http://www.avg.com/).
Following please find a brief overview of all applications available, and a short explanation of their functionality:
7.1. AVG Family Safety

AVG Family Safety helps you protect your children from inappropriate websites, media content, and online searches, and provides you with reports regarding their online activity. AVG Family Safety uses key-stroke technology to monitor your child's activities in chat-rooms and on social networking sites. If it spots words, phrases or language that are known to be used to victimize children online, it will notify you immediately via SMS or e-mail. The application allows you to set the appropriate level of protection for each of your children, and monitor them separately via unique logins.

A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 53
For detailed information please visit the dedicated AVG webpage, where you can also download the component immediately. To do so, you may use the AVG Family Safety link within the My Apps dialog.
7.2. AVG LiveKive

AVG LiveKive is dedicated to online data backup on secured servers. AVG LiveKive automatically backs up all your files, photos, and music to one safe place, allowing you to share them with family and friends and access them from any web-enabled device, including iPhones and Android devices. AVG LiveKive features include:

Safety measure in case your computer and/or hard disk gets corrupted Access to your data from any device connected to the Internet Easy organization Sharing with anyone you authorize
For detailed information please visit the dedicated AVG webpage, where you can also download the component immediately. To do so, you may use the AVG LiveKive link within the My Apps dialog.
7.3. AVG Mobilation

AVG Mobilation protects your cell phone from viruses and malware, and also provides you with the ability of tracking your smart phone remotely if you should become separated from it. AVG Mobilation features include:

File Scanner enables security scanning of files in different storage locations; Task Killer allows you to stop an application in case the device gets slow or stuck; App Locker allows you to lock and protect one or more applications by password against
misuse;
Tuneup collects various system parameters (battery meter, storage use, applications installation size and location, etc.) into a single centralize view to help you control the
system performance;
App Backup allows you to backup applications to the SD card, and restore them later; Spam and Scam feature allows you to mark SMS messages as spam, and report websites
as scam;
Wipe personal data remotely in case your phone gets stolen;
Safe Web Surfing offers a real time monitoring of the web pages you visit.
For detailed information please visit the dedicated AVG webpage, where you can also
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 54
download the component immediately. To do so, you may use the AVG Mobilation link within the My Apps dialog.
7.4. AVG PC Tuneup

AVG PC Tuneup application is an advanced tool for detailed system analysis and correction, as to how the speed and overall performance of your computer might be improved. AVG PC Tuneup features include:

Disk Cleaner - removes junk files that slow down a computer. Disk Defrag - defragments disk drives and optimizes system files placement. Registry Cleaner - repairs registry errors to increase PC stability. Registry Defrag - compacts the registry eliminating memory-consuming gaps. Disk Doctor - finds bad sectors, lost clusters, and directory errors and fixes them. Internet Optimizer - tailors the one-size-fits-all settings to a specific Internet connection. Track Eraser - removes the history of computer and Internet usage. Disk Wiper - wipes free space on disks to prevent the recovery of sensitive data. File Shredder - erases selected files beyond recovery on a disk or USB stick. File Recovery - recovers accidentally deleted files from disks, USB sticks, or cameras. Duplicate File Finder - helps to find and remove duplicate files that waste disk space. Services Manager - disables unnecessary services slowing down a computer. Startup Manager - allows a user to manage programs that start automatically on Windows
boot.
Uninstall Manager - completely uninstalls the software programs that you no longer need. Tweak Manager - allows a user to tune hundreds of hidden Windows settings. Task Manager - lists all running processes, services, and locked files. Disk Explorer - shows which files take up the most space on a computer. System Information - provides detailed information about installed hardware and software.
For detailed information please visit the dedicated AVG webpage, where you can also download the component immediately. To do so, you may use the AVG PC Tuneup link
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 55
within the My Apps dialog.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 56
8. AVG Security Toolbar
AVG Security Toolbar is a tool that closely cooperates with the LinkScanner component, and guards your maximum security while browsing the Internet. Within AVG Anti-Virus 2012, the installation of AVG Security Toolbar is optional; during the installation process you were invited to decide whether the component should be installed. AVG Security Toolbar is available directly in your Internet browser. At the moment, the supported Internet browsers are Internet Explorer (version
6.0 and higher), and/or Mozilla Firefox (version 3.0 and higher). No other browsers are supported (in case you are using some alternative Internet browser, e.g Avant Browser, you may encounter unexpected behavior).

AVG Security Toolbar consists of the following items:

AVG logo with the drop-down menu:
o Use AVG Secure Search - allows you to search directly from the AVG Security
Toolbar using the AVG Secure Search engine. All search results are continuously
checked by the Search-Shield service, and you can feel absolutely safe online.
o Current Threat Level - opens the virus lab web page with a graphical display of the
current threat level on the web.
o AVG Threat Labs - opens the specific AVG Threat Lab website (at http://www.
avgthreatlabs.com) where you can find information on various websites security and
the current threat level online.
o Toolbar Help - opens the online help covering all AVG Security Toolbar
functionality.
o Submit Product feedback - opens a web page with a form that you can fill in and
tell us how you feel about the AVG Security Toolbar.
o About... - opens a new window with the information on the currently installed AVG
Security Toolbar version.
Search field - search the Internet using the AVG Security Toolbar to be absolutely
secure and comfortable since all displayed search results are hundred percent safe. Fill in the keyword or a phrase into the search field, and press the Search button (or Enter). All search results are continuously checked by the Search-Shield service (within the
LinkScanner component).
Site Safety - this button opens a new dialog providing information on the current threat level (Currently safe) of the page you are just visiting. This brief overview can be expanded, and displayed with full details of all security activities related to the page right within the browser window (View complete report):
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 57
Delete - the 'trash bin' button offers a roll down the menu where you can select whether you want to delete information on your browsing, downloads, online forms, or delete all of your search history at once.
Weather - the button opens a new dialog providing information on the current weather in your location, and the weather forecast for the next two days. This information is updated regularly, every 3-6 hours. In the dialog, you can change the desired location manually, and to decide whether you want to see the temperature info in Celsius or Fahrenheit.
Facebook - This buttons allows you connect to the Facebook social network directly from within the AVG Security Toolbar.
Speedtest - This button redirects you to an on-line application that can help you verify the quality of your internet connection (ping), and your download and upload speed.
Shortcut buttons for quick access to these applications: Calculator, Notepad, Windows Explorer.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 58
9. AVG Do Not Track
AVG Do Not Track helps you identify websites that are collecting data about your online activities. An icon in your browser shows the websites or advertisers collecting data about your activity and gives you the choice to allow or disallow it.

AVG Do Not Track provides you with additional information about privacy policy of each respective service as well as a direct link to Opt-out from the service, if that is available.

In addition, AVG Do Not Track supports the W3C DNT protocol to automatically notify sites that you don’t want to be tracked. This notification is enabled by default, but can be changed at any time.
AVG Do Not Track is provided under these terms and conditions. AVG Do Not Track is enabled by default, but can be easily disabled at any time.
Instructions can be found in the FAQ article Disabling the AVG Do Not Track feature. For more information on AVG Do Not Track, please visit our website.
Currently, the AVG Do Not Track functionality is supported in Mozilla Firefox, Chrome, and Internet Explorer browsers. (In Internet Explorer, the AVG Do Not Track icon is located at the right hand side
of the command bar. Should you experience problems seeing the AVG Do Not Track icon with the browser's default settings, please make sure that you have the command bar activated. If you still cannot see the icon, please drag the command bar to the left to reveal all icons and buttons available in this toolbar.)
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 59
9.1. AVG Do Not Track interface
While online, AVG Do Not Track warns you as soon as any kind of data collection activity is detected. You will see the following dialog:
All detected data collection services are listed by name in the Trackers on this page overview. There are three types of data collection activities recognized by AVG Do Not Track:
Web Analytics (allowed by default): Services used to improve the performance and experience of the respective website. In this category you can find services as Google Analytics, Omniture, or Yahoo Analytics. We recommend not to block web analytics services, as the website might not work as intended.
Social Buttons (allowed by default): Elements designed for improving the social-networking experience. Social buttons are served from the social networks to the site you are visiting. They can collect data about your online activity while you are logged-in. Examples of Social buttons include: Facebook Social Plugins, Twitter Button, Google +1.
Ad Networks (some blocked by default): Services that collect or share data about your online activity on multiple sites, either directly or indirectly, to offer you personalized Ads unlike of content-based Ads. This is determined based on the privacy policy of each Ad network as available on their website. Some ad networks are blocked by default.
Note: Depending on what services are running in the background of the website, some of the three above described sections might not appear in the AVG Do Not Track dialog.
The dialog also contains two hyperlinks:
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 60
What is tracking? - click this link in the upper section of the dialog to get redirected to the dedicated webpage providing detailed explanation on the tracking principles, and description of specific tracking types.
Settings - click this link in the bottom section of the dialog to get redirected to the dedicated webpage where you can set the specific configuration of various AVG Do Not Track parameters (see the AVG Do Not Track settings chapter for detailed information)
9.2. Information on tracking processes
The list of detected data collection services provides just the name of the specific service. To make a conversant decision about whether the respective service should be blocked or allowed, you may need to know more. Move your mouse over the respective list item. An information bubble appears providing detailed data on the service. You will learn whether the service collects personal data, or other data available; whether the data are being shared with other third party subjects, and whether the collected data are being filed for possible further use.
In the lower section of the information bubble you can see the Privacy Policy hyperlink that redirects you to the website dedicated to privacy policy of the respective detected service.
9.3. Blocking tracking processes
With the lists of all Ad Networks / Social Buttons / Web Analytics you have now the option to control which services should be blocked. You can go two ways:
Block All - Click this button located in the bottom section of the dialog to to say you do not wish any data collection activity at all. (However, please keep in mind that this action
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 61
may break functionality in the respective webpage where the service is running!)
- If you do not want to block all the detected services at once, you can specify whether the service should be allowed or blocked individually. You may allow running of some of the detected systems (e.g. Web Analytics): these systems use the collected data for their own website optimization, and this way they help to improve the common Internet environment for all users. However, at the same time you may block the data collection activities of all
processes classified as Ad Networks. Just click the icon next to the respective service to block the data collection (the process name will appear as crossed out), or to allow the data collection again.
9.4. AVG Do Not Track settings
Directly in the AVG Do Not Track dialog, there is only one configuration option: in the bottom part you can see the Alert me when active trackers are detected checkbox. By default, this item is opt out. Mark the checkbox to confirm you want to be notified each time you enter a webpage containing a new data collection service that has not been blocked yet. When marked, if AVG Do Not Track detects a new data collection service in the page you are currently visiting, the notification dialog appears on your screen. Otherwise, you will only be able to notice the newly detected service by AVG Do Not Track icon (located in the command bar of your browser) changing its color from green to yellow.
However, in the bottom part of the AVG Do Not Track dialog you can find the Settings link. Click the link to get redirected to a dedicated web page where you can specify your detailed AVG Do Not Track Options:
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 62
Notification position (Top-Right by default) - Open the roll-down menu to specify in which position you want the AVG Do Not Track dialog to appear on your monitor.
Display notification for (10 by default) - In this field you should decide for how long (in seconds) you wish to see the AVG Do Not Track notification on your screen. You may specify a number ranging from 0 to 60 seconds (for 0, the notification will not appear on your screen at all).
Alert me when active trackers are detected (off by default) - Mark the checkbox to confirm you want to be notified each time you enter a webpage containing a new data collection service that has not been blocked yet. When marked, if AVG Do Not Track detects a new data collection service in the page you are currently visiting, the notification dialog appears on your screen. Otherwise, you will only be able to notice the newly detected service by AVG Do Not Track icon (located in the command bar of your browser) changing its color from green to yellow.
Notify web sites that I do not want to be tracked (on by default) - Keep this option marked to confirm that you want AVG Do Not Track to inform the provider of a detected data collection service that you do not want to be tracked.
Block the following (all listed data collection services allowed by default) - In this section you can see a box with a list of known data collection services that can be classified as Ad
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 63
Networks. By default, AVG Do Not Track blocks some of Ad Networks automatically and it remains up to your decision whether the rest should be blocked as well, or left allowed. To do so, just click the Block All button under the list.
The control buttons available within the AVG Do Not Track Options page are as follows:
Block All - click to block at once all the services listed in the above box that are classified as Ad Networks;
Allow All - click to unblock at once all previously blocked services listed in the above box, and classified as Ad Networks;
Defaults - click to discard all your customized settings, and to return to the default configuration;
Save - click to apply and save all your specified configuration; Cancel - click to cancel all your previously specified settings.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 64
10. AVG Advanced Settings
The advanced configuration dialog of AVG Anti-Virus 2012 opens in a new window named Advanced AVG Settings. The window is divided into two sections: the left part offers a tree­arranged navigation to the program configuration options. Select the component for which you want to change the configuration (or its specific part) to open the editing dialog in the right-hand section of the window.
10.1. Appearance

The first item of the navigation tree, Appearance, refers to the general settings of the AVG Anti­Virus 2012 user interface, and provides a few elementary options of the application's behavior:

Language selection
In the Language selection section you can chose your desired language from the drop-down menu. The selected language will then be used for the entire AVG Anti-Virus 2012 user interface. The drop- down menu only offers those languages you have previously selected to be installed during the
installation process (see chapter Custom options) plus English (English is always installed
automatically, by default). To finish switching your AVG Anti-Virus 2012 to another language you have to restart the application. Please follow these steps:
In the drop-down menu, select the desired language of the application
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 65
Confirm your selection by pressing the Apply button (right-hand bottom corner of the dialog)
Press the OK button confirm A new dialog pops-up informing you that in order to change the language of the application,
you need to restart your AVG Anti-Virus 2012 Press the Restart the application now button to agree with the program restart, and wait a
second for the language change to take effect:
System tray notifications
Within this section you can suppress displaying system tray notifications on the status of the AVG Anti-Virus 2012 application. By default, the system notifications are allowed to be displayed. It is
highly recommended that you keep this configuration! System notifications provide information for example on launching the scanning or updating process, or on status changes of a AVG Anti-Virus 2012 component. You should certainly pay attention to these notifications!
However, if for some reason you decide that you do not wish to be informed in this way, or that you would like only certain notifications (related to a specific AVG Anti-Virus 2012 component) to be displayed, you can define and specify your preferences by checking/unchecking the following options:
Display system tray notifications (on, by default) - by default, all notifications are displayed. Uncheck this item to completely turn off the display of all system notifications. When turned on, you can further select what specific notifications should be displayed:
o Display tray notifications about update (on, by default) - decide whether
information regarding the AVG Anti-Virus 2012 update process launch, progress, and finalization should be displayed.
o Display components state change notifications (off, by default) - decide whether
information regarding the component's activity/inactivity, or its potential problem should be displayed. When reporting a component's fault status, this option is equivalent to the informative function of the system tray icon reporting a problem in any AVG Anti-Virus 2012 component.
o Display Resident Shield related tray notifications (automatic action) (on, by
default) - decide whether information regarding file saving, copying, and opening processes should be displayed or suppressed (this configuration only appears if the Resident Shield Auto-heal option is on).
o Display tray notifications about scanning (on, by default) - decide whether
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 66
information upon automatic launch of the scheduled scan, its progress, and results should be displayed.
o Display E-mail Scanner related tray notifications (on, by default) - decide whether
information on scanning of all incoming and outgoing e-mail messages should be displayed.
o Display statistical notifications (on, by default) - keep the option checked to allow
regular statistical review notification to be displayed in the system tray.
o Display AVG Advisor notifications (on, by default) - decide whether information
upon AVG Advisor activities should be displayed in the slide panel on the system tray.
Gaming mode
This AVG function is designed for full-screen applications where any AVG information balloons (
displayed e.g. when a scheduled scan is started) would be disturbing (they could minimize the application or corrupt its graphics). To avoid this situation, keep the checkbox for the Enable gaming mode when a full-screen application is executed option marked (default setting).
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 67
10.2. Sounds

Within the Sounds dialog you can specify whether you want to be informed about specific AVG Anti-Virus 2012 actions by a sound notification:

The settings are only valid for the current user account. That means, each user on the computer can have their own sound settings. If you want to allow the sound notification, keep the Enable sound events option checked (the option is on, by default) to activate the list of all relevant actions. You may also want to check the Do not play sounds when fullscreen application is active option to suppress the sound notification in situations when it might be disturbing (see also the Gaming mode section of the Advanced settings/Appearance chapter in this document).
Control buttons
Browse - having selected the respective event from the list, use the Browse button to search your disk for the desired sound file you want to assign to it. (Please note that only *.
wav sounds are supported at the moment!)
Play - to listen to the selected sound, highlight the event in the list and push the Play button.
Delete - use the Delete button to remove the sound assigned to a specific event.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 68
10.3. Temporarily disable AVG protection
In the Temporarily disable AVG protection dialog you have the option of switching off the entire protection secured by your AVG Anti-Virus 2012 at once.
Please remember that you should not use this option unless it is absolutely necessary!
In most cases, it is not necessary to disable AVG Anti-Virus 2012 before installing new software or drivers, not even if the installer or software wizard suggests that running programs and applications be shut down first to make sure there are no unwanted interruptions during the installation process. Should you really experience problems during installation, try to deactivate the resident protection ( Enable Resident Shield) first. If you do have to temporarily disable AVG Anti-Virus 2012, you should re-enable it as soon as you're done. If you are connected to the Internet or a network when your antivirus software is disabled, your computer is vulnerable to attacks.
How to disable AVG protection
Tick the Temporarily disable AVG protection checkbox, and confirm your choice by pressing the Apply button
In the newly open Temporarily disable AVG protection dialog specify for how long you wish to disable your AVG Anti-Virus 2012. By default, the protection will be turned off for 10 minutes which should be sufficient for any common task such as installing new software
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 69
etc. You can decide for a longer time period, however this option is not recommended if not absolutely necessary. Afterwards, all deactivated components will be automatically activated again. At most, you can disable the AVG protection till the next computer restart.
10.4. Anti-Virus
The Anti-Virus component protects your computer continuously from all known types of viruses and spyware (including so-called sleeping and non-active malware, i.e. malware that has been downloaded but not yet activated).
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 70
10.4.1. Resident Shield
Resident Shield performs live protection of files and folders against viruses, spyware, and other malware.
In the Resident Shield Settings dialog you can activate or deactivate the resident protection completely by checking or unchecking the Enable Resident Shield item (this option is switched on by default). In addition, you can select which features of the resident protection should be activated:
Ask me before removing threats (on by default) - check to ensure that the Resident Shield will not perform any action automatically; instead it will display a dialog describing the detected threat, allowing you to decide what should be done. If you leave the box unchecked, AVG Anti-Virus 2012 will automatically heal the infection, and if this is not possible, the object will be moved into the Virus Vault.
Scan for Tracking cookies (off by default) - this parameter defines that cookies should be detected during scanning. (HTTP cookies are used for authenticating, tracking, and
maintaining specific information about users, such as site preferences or the contents of their electronic shopping carts.)
Report Potentially Unwanted Programs and Spyware threats (on by default) - check to activate the Anti-Spyware engine, and scan for spyware as well as for viruses. Spyware represents a questionable malware category: even though it usually represents a security risk, some of these programs can be installed intentionally. We recommend that you keep this feature activated as it increases your computer's security.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 71
Report enhanced set of Potentially Unwanted Programs (off by default) - mark to detect extended packages of spyware: programs that are perfectly ok and harmless when acquired from the manufacturer directly, but can be misused for malicious purposes later. This is an additional measure that increases your computer's security even more, however it can possibly block legal programs, and is therefore switched off by default.
Scan files on close (off by default) - on-close scanning ensures that AVG scans active objects (e.g. applications, documents …) when they are being opened, and also when they are being closed; this feature helps to protect your computer against some types of sophisticated virus.
Scan boot sector of removable media (on by default) Use Heuristics (on by default) - heuristic analysis will be used for detection (dynamic
emulation of the scanned object’s instructions in a virtual computer environment).
Scan files referred in registry (on by default) - this parameter defines that AVG will scan all executable files added to the startup registry to avoid a known infection being executed upon next computer startup.
Enable thorough scanning (off by default) - in specific situations (in a state of extreme emergency) you may check this option to activate the most thorough algorithms that will
check all possibly threatening objects in-depth. Remember though that this method is rather time consuming.
Enable Instant Messaging protection and P2P download protection (on by default) ­check this item if you wish to verify that the instant messaging communication (e.g. AIM, Yahoo!, ICQ, Skype, MSN Messenger, ...) and data downloaded within Peer-to-Peer networks (networks allowing direct connection between clients, without a server, which is potentially dangerous; typically used to share music files) are virus free.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 72
In the Files scanned by the Resident Shield dialog it is possible to configure which files will be scanned (by specific extensions):
Mark the respective checkbox to decide whether you want to Scan all files or Scan infectable files and selected types of documents only. If you have chosen the latter option, you can further specify a list of extensions defining files that should be excluded from scanning, and also a list of file extensions defining files that must be scanned under all circumstances.
Check the Always scan files without extensions (on by default) to ensure that even files with no extension and unknown format should be scanned by the Resident Shield. We recommend that you keep this feature switched on, as files without extensions are suspicious.
The section below called The Resident Shield will scan further summarizes the current settings, displaying a detailed overview of what the Resident Shield will actually scan.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 73
The Resident Shield - Exceptions dialog offers the option of defining files and/or folders that should be excluded from the Resident Shield scanning.
If this is not essential, we strongly recommend not excluding any items!
Control buttons
The dialog provides the following control buttons:
Add Path – specify a directory (directories) to be excluded from the scanning by selecting them one by one from the local disk navigation tree
Add File – specify files to be excluded from the scanning by selecting them one by one from the local disk navigation tree
Edit Item – allows you to edit the specified path to a selected file or folder Remove Item – allows you to delete the path to a selected item from the list Edit List - allows you to edit the entire list of defined exceptions in a new dialog that
behaves like a standard text editor
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 74
10.4.2. Cache Server
The Cache Server Settings dialog refers to the cache server process designed to speed up all types of AVG Anti-Virus 2012 scans:
The cache server gathers and keeps information on trustworthy files (a files is considered trustworthy if signed with digital signature on a trustworthy source). These files are then automatically considered to be safe, and do not need to be re-scanned; therefore these files are skipped during scanning.
The Cache Server Settings dialog offers the following options for configuration:

Caching enabled (on by default) - uncheck the box to switch off the Cache Server, and empty the cache memory. Please note that scanning might slow down, and overall performance of your computer decrease, as every single file in use will be scanned for viruses and spyware first.

Enable adding new files into cache (on by default) - uncheck the box to stop adding more files into the cache memory. Any already cached files will be kept and used until caching is turned off completely, or until the next update of the virus database.
Unless you have a good reason to switch the cache server off, we strongly recommend that you keep the default settings and leave both the options on! Otherwise you may experience a significant decrease in your system speed and performance.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 75
10.5. E-mail protection

In the E-mail protection section you can edit the detailed configuration of E-mail Scanner and Anti- Spam:

10.5.1. E-mail Scanner

The E-mail Scanner dialog is divided into three sections:

E-mail scanning
In this section, you can set these basics for incoming and/or outgoing e-mail messages:
Check incoming e-mail (on by default) - mark to switch on/off the option of scanning of all e-mail messages delivered to your e-mail client
Check outgoing e-mail (off by default) - mark to switch on/off the option of scanning of all e-mails sent from your account
Modify subject of virus infected messages (off by default) - if you want to be warned that the scanned e-mail message was detected as infected, mark this item and fill in the desired text into the text field. This text will then be added to the "Subject" field for each detected e­mail message for easier identification and filtering. The default value is ***VIRUS*** which we recommend that you keep.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 76
Scanning properties
In this section, you can specify how the e-mail messages will be scanned:
Use Heuristics (on by default) - check to use the heuristics detection method when scanning e-mail messages. When this option is on, you can filter e-mail attachments not only by the extension but the actual contents of the attachment will also be considered. The filtering can be set in the Mail Filtering dialog.
Report Potentially Unwanted Programs and Spyware threats (on by default) - check to activate the Anti-Spyware engine, and scan for spyware as well as for viruses. Spyware represents a questionable malware category: even though it usually represents a security risk, some of these programs can be installed intentionally. We recommend that you keep this feature activated as it increases your computer security.
Report enhanced set of Potentially Unwanted Programs (off by default) - mark to detect extended packages of spyware: programs that are perfectly ok and harmless when acquired from the manufacturer directly, but can be misused for malicious purposes later. This is an additional measure that increases your computer security even more, however it may block legal programs, and is therefore switched off by default.
Scan inside archives (on by default) - check to scan contents of archives attached to e- mail messages.
Enable thorough scanning (off by default) - in specific situations (e.g. suspicions of your computer being infected by an virus or attack) you may check this option to activate the
most thorough scanning algorithms that will scan even those areas of your computer that hardly ever get infected, just to be absolutely sure. Remember though that this method is rather time-consuming.
E-mail attachments reporting
In this section, you can set additional reports about potentially dangerous or suspicious files. Please note that no warning dialog will be displayed; a certification text will only be added to the end of the e-mail message, and all such reports will be listed in the E-mail Scanner detection dialog:
Report password protected archives – archives (ZIP, RAR etc.) that are protected by password cannot be scanned for viruses; check the box to report these as potentially dangerous.
Report password protected documents – documents protected by password cannot be scanned for viruses; check the box to report these as potentially dangerous.
Report files containing macro – a macro is a predefined sequence of steps aimed to make certain tasks easier for a user (MS Word macros are widely known). As such, a macro can contain potentially dangerous instructions, and you might like to check the box to ensure that files with macros will be reported as suspicious.
Report hidden extensions – a hidden extension can make e.g. a suspicious executable
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 77
file "something.txt.exe" appear as harmless plain text file "something.txt"; check the box to report these as potentially dangerous.
Move reported attachments to Virus Vault - specify whether you wish to be notified via e­mail about password protected archives, password protected documents, files containing macros, and/or files with hidden extensions detected as an attachment to the scanned e­mail message. If such a message is identified during scanning, define whether the detected infectious object should be moved to the Virus Vault.
In the Certification dialog you can mark the specific checkboxes to decide whether you want to certify your incoming mail (Certify incoming e-mail) and/or outgoing mail (Certify outgoing e-mail ). For each of these options you can further specify the With attachments only parameter so that the certification is only added to e-mail messages with attachments:
By default, the certification text consists of just a basic information that states No virus found in this message. However, this information can be extended or changed according to your needs: write the desired text of certification into the E-mail certification text field. In the Language used for the e- mail certification text section you can further define in which language the automatically generated part of the certification (No virus found in this message) should be displayed.
Note: Please bear in mind that only the default text will be displayed in the requested language, and your customized text will not be translated automatically!
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 78
The Attachment filter dialog allows you to set up parameters for e-mail message attachment scanning. By default, the Remove attachments option is switched off. If you decide to activate it, all e-mail message attachments detected as infected or potentially dangerous will be removed automatically. If you want to define specific types of attachments that should be removed, select the respective option:
Remove all executable files - all *.exe files will be deleted Remove all documents - all *.doc, *.docx, *.xls, *.xlsx files will be deleted Remove files with these comma separated extensions - will remove all files with the
defined extensions
In the Servers section you can edit parameters for the E-mail Scanner servers:
POP3 server SMTP server IMAP server
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 79
You can also define new servers for incoming or outgoing mail, using the Add new server button.
POP3
In this dialog (opened via Servers / POP3) you can set up a new E-mail Scanner server using the POP3 protocol for incoming mail:
POP3 Server Name - in this field you can specify the name of newly added servers (to add a POP3 server, click the right mouse button over the POP3 item of the left navigation menu). For automatically created "AutoPOP3" servers this field is deactivated.
Type of login - defines the method for determining the mail server used for incoming mail:
o Automatic - login will be carried out automatically, according to your e-mail client
settings.
o Fixed host - in this case, the program will always use the server specified here.
Please specify the address or name of your mail server. The login name remains unchanged. For a name, you may use a domain name (for example, pop.acme.com) as well as an IP address (for example, 123.45.67.89). If the mail server uses a non­standard port, you can specify this port after the server name using a colon as the
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 80
SMTP
delimiter (for example, pop.acme.com:8200). The standard port for POP3 communication is 110.
Additional settings - specifies more detailed parameters:
o Local port - specifies the port on which the communication from your mail
application should be expected. You must then specify in your mail application this port as the port for POP3 communication.
o Connection - in the drop-down menu, you can specify which kind of connection to
use (regular/SSL/SSL default). If you choose SSL connection, the data sent is encrypted without the risk of being traced or monitored by a third party. This feature is also only available when the destination mail server supports it.
E-mail client POP3 server activation - check/uncheck this item to activate or deactivate the specified POP3 server
In this dialog (opened via Servers / SMTP) you can set up a new E-mail Scanner server using the SMTP protocol for outgoing mail:
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 81
SMTP Server Name - in this field you can specify the name of newly added servers (to add a SMTP server, click the right mouse button over the SMTP item of the left navigation menu). For automatically created "AutoSMTP" servers this field is deactivated.
Type of login - defines the method for determining the mail server used for outgoing mail:
o Automatic - login will be carried out automatically, according to your e-mail client
settings
o Fixed host - in this case, the program will always use the server specified here.
Please specify the address or name of your mail server. You may use a domain name (for example, smtp.acme.com) as well as an IP address (for example,
123.45.67.89) for a name. If the mail server uses a non-standard port, you can type this port behind the server name using a colon as the delimiter (for example, smtp. acme.com:8200). The standard port for SMTP communication is 25.
Additional settings - specifies more detailed parameters:
o Local port - specifies the port on which the communication from your mail
application should be expected. You must then specify in your mail application this port as the port for SMTP communication.
o Connection - in this drop-down menu, you can specify which kind of connection to
use (regular/SSL/SSL default). If you choose SSL connection, the data sent is encrypted without the risk of being traced or monitored by a third party. This feature is available only when the destination mail server supports it.
IMAP
E-mail client SMTP server activation - check/uncheck this box to activate/deactivate the SMTP server specified above
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 82
In this dialog (opened via Servers / IMAP) you can set up a new E-mail Scanner server using the IMAP protocol for outgoing mail:
IMAP Server Name - in this field you can specify the name of newly added servers (to add a IMAP server, click the right mouse button over the IMAP item of the left navigation menu
). For automatically created "AutoIMAP" servers this field is deactivated. Type of login - defines the method for determining the mail server used for outgoing mail:
o Automatic - login will be carried out automatically, according to your e-mail client
settings
o Fixed host - in this case, the program will always use the server specified here.
Please specify the address or name of your mail server. You may use a domain name (for example, smtp.acme.com) as well as an IP address (for example,
123.45.67.89) for a name. If the mail server uses a non-standard port, you can type this port behind the server name using a colon as the delimiter (for example, imap. acme.com:8200). The standard port for IMAP communication is 143.
Additional settings - specifies more detailed parameters:
o Local port - specifies the port on which the communication from your mail
application should be expected. You must then specify in your mail application this port as the port for IMAP communication.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 83
o Connection - in this drop-down menu, you can specify which kind of connection to
use (regular/SSL/SSL default). If you choose a SSL connection, the data sent is encrypted without the risk of being traced or monitored by a third party. This feature is available only when the destination mail server supports it.
E-mail client IMAP server activation - check/uncheck this box to activate/deactivate the IMAP server specified above
10.6. Link Scanner
10.6.1. Link Scanner settings

The LinkScanner settings dialog allows you to switch the elementary features of the LinkScanner:

Enable Search-Shield - In the configuration dialog, this option is deactivated since the Search-Shield services has been terminated in all AVG products.
Enable Surf-Shield - (on by default): active (real-time) protection against exploitative sites as they are accessed. Known malicious site connections and their exploitative content are blocked as they are accessed by the user via a web browser (or any other application that uses HTTP).
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 84
10.6.2. Online Shield

The Online Shield dialog offers the following options:

Enable Online Shield (on, by default) - activate/deactivate the entire Online Shield
service. For further advanced settings of Online Shield please continue to the subsequent dialog called Web Protection.
Enable AVG Accelerator (on, by default) - activate/deactivate the AVG Accelerator service that allows smoother online video playback and makes additional downloads easier.
Threat notification mode
In the bottom section of the dialog, select the method by which you wish to be informed about a potential detected threat: via standard pop-up dialog, via tray balloon notification, or via tray icon info.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 85
In the Web Protection dialog you can edit the component's configuration regarding the scan of the website content. The editing interface allows you to configure the following elementary options:
Enable Web protection - this option confirms that the Online Shield should perform a scan o the www page content. Provided this option is on (by default), you can also switch these items in/off:
o Check archives - (off by default): scan the content of archives possibly included in
the www page to be displayed.
o Report Potentially Unwanted Programs and Spyware threats - (on by default):
check to activate the Anti-Spyware engine, and scan for spyware as well as for viruses. Spyware represents a questionable malware category: even though it usually represents a security risk, some of these programs can be installed intentionally. We recommend that you keep this feature activated as it increases your computer security.
o Report enhanced set of Potentially Unwanted Programs - (off by default): mark to
detect extended package of spyware: programs that are perfectly ok and harmless when acquired from the manufacturer directly, but can be misused for malicious purposes later. This is an additional measure that increases your computer security even more, however it may block legal programs, and is therefore switched off by default.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 86
o Use heuristic analysis - (on by default): scan the content of the page to be
displayed using the heuristic analysis method (dynamic emulation of the scanned object’s instructions in a virtual computer environment).
o Enable thorough scanning (off by default) - in specific situations (suspicions about
your computer being infected) you may check this option to activate the most
thorough scanning algorithms that will scan even those areas of your computer that rarely get infected, just to be absolutely sure. Remember though that this method is rather time-consuming.
o Maximum part size of a file to be scanned - if included files are present in the
displayed page you can also scan their content even before these are downloaded to your computer. However, scanning of large files takes quite some time and the web page download might be slowed significantly. You can use the slide bar to specify the maximum size of a file that is still to be scanned with Online Shield. Even if the downloaded file is bigger than specified, and therefore will not be scanned with Online Shield, you are still protected: if the file is infected, the Resident Shield will detect it immediately.
o Exclude host/IP/domain - you can type the exact name of a server (host, IP
address, IP address with mask, or URL) or a domain that should not be scanned by
Online Shield into the text field. Therefore only exclude hosts that you can be absolutely sure would never provide dangerous website content.
10.7. Scans
The advanced scan settings are divided into four categories referring to specific scan types as defined by the software vendor:
Whole Computer scan - standard predefined scan of the entire computer Shell Extension Scan - specific scanning of a selected object directly from the Windows
Explorer environment
Specific Files or Folders Scan - standard predefined scan of selected areas of your
computer
Removable Device Scan - specific scanning of removable devices attached to your
computer
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 87
10.7.1. Whole computer scan

The Whole Computer scan option allows you to edit parameters of one of the scans predefined by the software vendor, Whole computer scan:

Scan settings
The Scan settings section offers a list of scanning parameters that can be optionally switched on/ off:
Heal / remove virus infection without asking me (on by default) - if a virus is identified during scanning it can be healed automatically if a cure is available. If the infected file cannot be healed automatically, the infected object will be moved to the Virus Vault.
Report Potentially Unwanted Programs and Spyware threats (on by default) - check to activate the Anti-Spyware engine, and scan for spyware as well as for viruses. Spyware represents a questionable malware category: even though it usually represents a security risk, some of these programs can be installed intentionally. We recommend that you keep this feature activated as it increases your computer security.
Report enhanced set of Potentially Unwanted Programs (off by default) - mark to detect extended packages of spyware: programs that are perfectly ok and harmless when acquired from the manufacturer directly, but can be misused for malicious purposes later. This is an
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 88
additional measure that increases your computer security even more, however it may block legal programs, and is therefore switched off by default.
Scan for Tracking Cookies (off by default) - this parameter of the Anti-Spyware component stipulates that cookies should be detected; (HTTP cookies are used for
authenticating, tracking, and maintaining specific information about users, such as site preferences or the contents of their electronic shopping carts)
Scan inside archives (off by default) - this parameter stipulates that scanning should check all files stored inside archives, e.g. ZIP, RAR, ...
Use Heuristics (on by default) - heuristic analysis (dynamic emulation of the scanned object’s instructions in a virtual computer environment) will be one of the methods used for
virus detection during scanning; Scan system environment (on by default) - scanning will also check the system areas of
your computer.
Enable thorough scanning (off by default) - in specific situations (suspicions about your computer being infected) you may check this option to activate the most thorough scanning
algorithms that will scan even those areas of your computer that rarely get infected, just to be absolutely sure. Remember though that this method is rather time-consuming.
Scan for rootkits (on by default) - Anti-Rootkit scan searches your computer for possible rootkits, i.e. programs and technologies that can cover malware activity in your computer. If a rootkit is detected, this does not necessarily mean your computer is infected. In some cases, specific drivers or sections of regular applications may be misleadingly detected as rootkits.
You should also decide whether you want to scan
All file types with the option of defining exceptions from scanning by providing a list of comma separated (after being saved, the commas change into semicolons) file extensions that should not be scanned;
Selected file types - you can specify that you want to scan only files that can be infected (
files that cannot get infected will not be scanned, for instance some plain text files, or some other non-executable files), including media files (video, audio files - if you leave this box unchecked, it will reduce the scanning time even more, because these files are often quite large and are not likely to be infected by a virus). Again, you can specify by
extensions which files should always be scanned. Optionally, you can decide you want to Scan files without extension - this option is on by
default, and it is recommended that you keep it so unless you have a real reason to change it. Files with no extensions are rather suspicious and should be scanned at all times.
Adjust how quickly scan completes
Within the Adjust how quickly scan completes section you can further specify the desired
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 89
scanning speed dependent on system resource usage. By default, this option value is set to user sensitive level of automatic resource usage. If you want the scanning to run faster, it will take less
time but the system resources used will increase significantly during the scan, and will slow down your other activities on the PC (this option can be used when your computer is switched on but nobody is currently working on it). On the other hand, you can decrease system resources used by extending the scanning duration.
Set additional scan reports ...
Click the Set additional scan reports ... link to open a standalone dialog window called Scan reports where you can tick several items to define what scan findings should be reported:
10.7.2. Shell extension Scan
Similar to the previous Whole Computer scan item, this item named Shell extension scan also offers several options for editing the scan predefined by the software vendor. This time the configuration is related to scanning of specific objects launched directly from the Windows Explorer environment (shell extension), see Scanning in Windows Explorer chapter:
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 90
The list of parameters is identical to those available for the Scan of the whole computer. However, the default settings differ (for instance, Whole Computer scan by default does not check the archives but it does scan the system environment; vice versa with the Shell Extension Scan).
Note: For a description of specific parameters please consult the AVG Advanced Settings / Scans /
Whole Computer scan chapter.
Compared to the Whole Computer scan dialog, the Shell extension scan dialog also includes the section named Other settings related to AVG User Interface, where you can specify whether you want the scan progress and scan results to be accessible from the AVG user interface. You can also specify that the scan result should only be displayed in case an infection is detected during scanning.
10.7.3. Specific files or folders scan
The editing interface for Scan specific files or folders is identical to the Whole Computer scan editing dialog. All configuration options are the same; however, the default settings are more strict for the Scan of the whole computer:
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 91
All parameters set up in this configuration dialog apply only to the areas selected for scanning with
Scan of specific files or folders!
Note: For a description of specific parameters please consult the AVG Advanced Settings / Scans /
Whole Computer scan chapter.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 92
10.7.4. Removable device scan
The editing interface for Removable device scan is also very similar to the Whole Computer scan editing dialog:
The Removable device scan is launched automatically once you attach any removable device to your computer. By default, this scan is switched off. However, it is crucial to scan removable devices for potential threats since these are a major source of infection. To have this scan ready and launched automatically when needed, mark the Enable Removable device scan option.
Note: For a description of specific parameters please consult the AVG Advanced Settings / Scans /
Whole Computer scan chapter.
10.8. Schedules
In the Schedules section you can edit the default settings of:
Scheduled scan Definitions update schedule Program update schedule
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 93
10.8.1. Scheduled Scan
The parameters of the scheduled scan can be edited (or a new schedule set up) on three tabs. On each tab you can first check/uncheck the Enable this task item to simply deactivate the scheduled test temporarily, and switch it on again as the need arises:
Schedule settings

Next, the text field called Name (deactivated for all default schedules) states the name assigned to this very schedule by the program vendor. For newly added schedules (you can add a new schedule by right-clicking over the Scheduled scan item in the left navigation tree) you can specify your own name, and in that case the text field will open for editing. Try to always use brief, descriptive, and apt names for scans to make it easier to later differentiate the scan from others.

Example: It is not appropriate to call the scan by the name "New scan" or "My scan" since these names do not refer to what the scan actually checks. On the other hand, an example of a good descriptive name would be "System area scan" etc. It is also not necessary to specify in the scan's name whether it is the scan of the whole computer or just a scan of selected files or folders - your own scans will always be a specific version of the scan of selected files or folders.
In this dialog you can further define the following parameters of the scan:
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 94
Schedule running
Here, you can specify time intervals for the newly scheduled scan launch. The timing can either be defined by the repeated scan launch after a certain period of time (Run every ...) or by defining an exact date and time (Run at specific time interval ...), or possibly by defining an event that the scan launch should be associated with (Run on computer startup).
Advanced schedule options
This section allows you to define under which conditions the scan should/should not be launched if the computer is in low power mode or switched off completely. Once the scheduled scan is launched in the time you have specified, you will be informed on this fact via a pop-up window opened over the AVG system tray icon:
A new AVG system tray icon then appears (in full color with a flash light) informing a scheduled scan is running. Right-click on the running scan AVG icon to open a context menu where you can decide to pause or even stop the running scan, and also change the priority of the currently running scan.
How to scan
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 95
On the How to scan tab you will find a list of scanning parameters that can be optionally switched on/off. By default, most parameters are switched on and the functionality will be applied during scanning. Unless you have a valid reason to change these settings we recommend that you
keep the predefined configuration:
Heal / remove virus infection without asking me (on by default): if a virus is identified
during scanning it can be healed automatically if a cure is available. If the infected file cannot be healed automatically, the infected object will be moved to the Virus Vault.
Report Potentially Unwanted Programs and Spyware threats (on by default): check to activate the Anti-Spyware engine, and scan for spyware as well as for viruses. Spyware represents a questionable malware category: even though it usually represents a security risk, some of these programs can be installed intentionally. We recommend that you keep this feature activated as it increases your computer security.
Report enhanced set of Potentially Unwanted Programs (off by default): mark to detect extended packages of spyware: programs that are perfectly ok and harmless when acquired from the manufacturer directly, but can be misused for malicious purposes later. This is an additional measure that increases your computer security even more, however it may block legal programs, and is therefore switched off by default.
Scan for Tracking Cookies (off by default): this parameter of the Anti-Spyware component specifies that cookies should be detected during scanning; (HTTP cookies are used for
authenticating, tracking, and maintaining specific information about users, such as site
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 96
preferences or the contents of their electronic shopping carts)
Scan inside archives (off by default): this parameter specifies that the scanning should check all files even if they are stored inside an archive, e.g. ZIP, RAR, ...
Use Heuristics (on by default): heuristic analysis (dynamic emulation of the scanned object’s instructions in a virtual computer environment) will be one of the methods used for
virus detection during scanning; Scan system environment (on by default): scanning will also check the system areas of
your computer;
Enable thorough scanning (off by default): in specific situations (suspicious of your computer being infected) you may check this option to activate the most thorough scanning
algorithms that will scan even those areas of your computer that rarely get infected, just to be absolutely sure. Remember though that this method is rather time-consuming.
Scan for rootkits (on by default): Anti-Rootkit scan searches your computer for possible
rootkits, i.e. programs and technologies that can cover malware activity in your computer. If a rootkit is detected, this does not necessarily mean your computer is infected. In some cases, specific drivers or sections of regular applications may be misleadingly detected as rootkits.
You should also decide whether you want to scan
All file types with the option of defining exceptions from scanning by providing a list of comma separated (after being saved, the commas change into semicolons) file extensions that should not be scanned;
Selected file types - you can specify that you want to scan only files that can get infected (
files that cannot get infected will not be scanned, for instance some plain text files, or some other non-executable files), including media files (video, audio files - if you leave this box unchecked, it will reduce the scanning time even more, because these files are often quite large and are not likely to be infected by a virus). Again, you can specify by
extensions which files should always be scanned. Optionally, you can decide you want to Scan files without extension - this option is on by
default, and it is recommended that you keep it so unless you have a real reason to change it. Files with no extensions are rather suspicious and should be scanned at all times.
Adjust how quickly scan completes
Within the Adjust how quickly scan completes section you can further specify the desired scanning speed dependent on system resource usage. By default, this option value is set to the user sensitive level of automatic resource usage. If you want the scan to run faster, it will take less time but the system resources used will increase significantly during the scan, and will slow down your other activities on the PC (this option can be used when your computer is switched on but nobody is currently working on it). On the other hand, you can decrease the system resources used by extending the scanning duration.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 97
Set additional scan reports
Click the Set additional scan reports ... link to open a standalone dialog window called Scan reports where you can tick several items to define what scan findings should be reported:
Additional scan settings
Click the Additional scan settings ... to open a new Computer shutdown options dialog where you can decide whether the computer should be shut down automatically once the running scanning process is over. Having confirmed this option (Shutdown computer upon scan completion), a new option activates that allows the computer to shut down even if it is currently locked (Force shutdown if computer is locked).
What to scan
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 98
On the What to scan tab you can define whether you want to schedule scanning of the whole
computer or scanning of specific files or folders. If you select scanning of specific files or folders, in
the bottom part of this dialog the displayed tree structure activates and you can specify the folders to be scanned.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 99
10.8.2. Definitions Update Schedule
If really necessary, you can uncheck the Enable this task item to simply deactivate the scheduled definitions update temporarily, and switch it on again later:
Within this dialog you can set up some detailed parameters for the definition update schedule. The text field called Name (deactivated for all default schedules) shows the name assigned to this very schedule by the program vendor.
Schedule running
In this section, specify the time intervals for the newly scheduled definitions update launch. The timing can either be defined by the repeated update launch after a certain period of time (Run every ...) or by defining an exact date and time (Run at specific time ...).
Advanced schedule options
This section allows you to define under which conditions the definition update should/should not be launched if the computer is in low power mode or switched off completely.
A V G A nti-V irus 201 2 © 20 1 2 C opyright A V G Tec hnologies C Z, s .r.o. All rights res erved. 10 0
Loading...