02/03 Rev. 2.17-01 USER + SERVICE MANUAL Specifications, page 1
TTX x50/67x
–
Wildcats (plus)
–
S 45/65/95/105
Specifications TTX / Wildcats
Technical Specifications.................................2
Device types, use ....................................... 2
Dimensions.................................................2
Performance data....................................... 3
Label material specifications ......................6
Ribbon specifications..................................6
Operation features......................................6
Connections, device data........................... 7
Test certificates.......................................... 7
CE Conformity............................................ 7
Appendix........................................................ 8
Through-run diagram ................................. 8
Index .............................................................. 9
02/03 Rev. 2.17-01 USER + SERVICE MANUAL Specifications TTX / Wildcats, Seite 2
TTX x50/67x
–
Wildcats (plus)
–
S 45/65/95/105
Technical Specifications
Device types, use
TTX 450/674
Puma/Puma plus
S 45
Label printing using thermal or thermal transfer printing process,
print width up to 106.6 mm (4 inch)
TTX 650/675
Lion/Lion plus
S 65
Label printing using thermal or thermal transfer printing process,
print width up to 127.9 mm (5 inch)
TTX 950
Tiger
S 95
Label printing using thermal or thermal transfer printing process,
print width up to 159.9 mm (6 inch)
TTX 1050
Tiger XXL
S 105
Label printing using thermal or thermal transfer printing process,
print width up to 213.2 mm (8 inch)
Dimensions
Printer type Cutter Width /mmHeight /mmDepth /mmWeight /
kg
310 305 480 21,0
TTX 450/Puma/S45
310 305 540 22,5
350 305 480 22,5
TTX 650/674/675/
Puma/Puma plus/
Lion/Lion plus/S65
350 305 540 24,0
380 305 480 25,0
TTX 950/Tiger/S95
380 305 540 26,5
470 305 480 28,0
TTX 1050/Tiger XXL/
S105
470 305 540 29,5
Tab. 1: Dimensions and weights of the printers in the TTX x50 and TTX 67x series. All
width measures refer to the housing including the motor cover. All width measures
refer to the housing including the motor cover.
02/03 Rev. 2.17-01 USER + SERVICE MANUAL Specifications TTX / Wildcats, Seite 3
TTX x50/67x
–
Wildcats (plus)
–
S 45/65/95/105
Performance data
Print technology
Thermal printing, thermal transfer printing
Printhead
"Near Edge Type" type printhead, high-definition, fast, with integrated
temperature control
Resolution
12 dots/mm (300 dpi)
Print speed
TTX 450/S45/Puma 100 to 300 mm/s (4 to 12 “/s)
TTX 674/Puma plus 100 to 300 mm/s (4 to 12 “/s)
TTX 675/Lion plus 100 to 300 mm/s (4 to 12 “/s)
TTX 650/S65/Lion 100 to 300 mm/s (4 to 12 “/s)
TTX 950/S95/Tiger 100 to 250 mm/s (4 to 10 “/s)
TTX 1050/S105/XXL 100 to 200 mm/s (4 to 8 “/s)
in units of respectively 25,4 mm/s (1 “/s)
Print width (actual)
TTX 450/S45/Puma 106.6 mm
TTX 674/Puma plus 106,6 mm
TTX 650/S65/Lion 127.9 mm
TTX 675/Lion plus 127,9 mm
TTX 950/S95/Tiger 159.9 mm
TTX 1050/S105/XXL 213.2 mm
Impression
accuracy
Printing direction (Y-):
The impression accuracy depends on the print position. With the
printout starting directly at the gap position, the accuracy is ± 0.5 mm.
A distance between gap (that is label start) and print position, will add
± 1% of this distance to the accuracy fault (see illustration in the
Appendix).
X-direction: +/- 0.5 mm
Fig. 1: Impression accuracy depends on t he printing position.
+0,5
+1,0
+1,5
+2,0
mm
+3,0
Max. misalignment of the printing position
- 0,5
-1,0
-1,5
-2,0
-2,5
-3,0
50
100 150 200 mm 300
Distance
punch - printing position
Punch position
Printing
direction
0
Printing position 1 Printing position 2
Max. misalignment at
printing position 1
= 1,0 mm
Max. misalignment at
printing position 2
= 2,5 mm
Label
+1%
-1%
Punch
Z00521E.cdr
Loading...