Page 1
HD90 QUICK START GUIDE
About this Guide
This guide is a quick reference for users to install and operate HD90 Night Vision HD
Indoor/Outdoor Bullet Cameras. It provides only basic information regarding HD90
camera models. For further details on installation and operation, please refer to the
User Manual. The HD90 Camera User Manual can be found on the included CD and
at avertx.com
CONTENTS
Before proceeding, please check to conrm that the box contains the items listed
here. If any item is missing or has defects, DO NOT install or operate the product and
contact AvertX for assistance.
HD90 Bullet Camera Hex Head Wrench
Anchors
Quick Start Guide & Installation CD
Screws
INSTALLATION
Remove Packaging
Align Holes on Wall
Adjust Aim
All HD90 cameras can be installed directly
onto a wall or ceiling. Be sure that the
structure is strong enough to support the
camera.
1. If passing the cord through a wall or
ceiling, drill a 3/4” hole.
2. Connect the Ethernet cable to the dongle
on the camera.
• Protect the network cable connection
from water damage by running the
cord inside a wall or ceiling, or through
conduit.
• For outdoor installations, seal any
holes in the wall or ceiling with silicone
caulk to protect against water intrusion.
3. Afx the mounting bracket to the ceiling
or wall with the included self-tapping
screws and wall anchors.
4. Use the included hex-head wrench to
loosen the bolt on the side of the bracket
mount and on the camera housing.
5. Adjust the position of your camera.
6. Tighten the bolts to secure your camera.
31629AC
Page 2
MICRO SD CARD
Reset button
& RESET BUTTON
• Your HD90 camera includes a Micro SD card slot
(up to 16GB), which can be used for emergency
video backup. Micro SD card is not included.
• Press the reset button for 30 seconds to
return the camera to factory default settings, if
necessary.
• You must remove the cover of the HD90 camera
to access the Micro SD card slot and the Reset
button.
For optimal image quality, you may need to manually focus your AvertX camera after
it has been installed. This card provides instructions for focusing your AvertX HD90
Night Vision HD Indoor/Outdoor Bullet Camera.
1. Remove the screw at the bottom of the
front lens cover.
2. Remove the front lens cover by gently
tilting it up from the bottom.
3. Remove the rubber gasket.
4. Loosen the set screw.
5. Turn the lens to focus your camera.
Tilt lens cover up to remove
Screw
Remove lens cover
6. Tighten the set screw.
7. Replace the rubber gasket.
8. Align the positioning pin at the top of the
lens cover with the hole on the camera
body and replace the cover.
9. Replace the screw at the bottom of the
front lens cover.
Micro SD card slot
Set screw
Remove
gasket
Turn lens
to focus
NETWORK CABLE INSTALLATION
When installing your AvertX Night Vision HD Indoor/Outdoor Bullet Camera, it is
important to consider how the network cable attached to the camera is arranged.
• Protect the network cable connection from water damage by running the cord
inside a wall or ceiling, or through conduit.
• If passing the cord through a wall or ceiling, drill a 3/4”” hole.
• For outdoor installations, seal any holes in the wall or ceiling with silicone caulk to
protect against water intrusion.
CONNECTING TO THE CAMERAFOCUSING THE CAMERA
If you are using this camera with an AvertX recorder, follow the instructions in the
HDIP recorder user manual to connect to your camera. You can also set up your
camera over your network using an internet browser. Type the IP address of the
camera in the address bar of your internet browser to connect to the camera.
If your internet browser doesn’t install the camera viewer software, check the security
settings or ActiveX controls and plug-in settings. If your internet browser asks for
permission to install the ActiveX control, you must allow the ActiveX control to
continue the installation.
Default IP address:
192.168.0.250
User Name and Password:
The username and password are case sensitive. AvertX strongly recommends changing the password after the initial setup to prevent unauthorized access to the camera.
Username – Admin
Password – 1234
Copyright © 2014 AvertX. All rights reserved. Information contained in this document
is subject to change without prior notice. AvertX does its best to provide accurate
information, but cannot be held responsible for typos or mistakes.
1-855-2avertX (1-855-228-3789)
www.avertx.com
31629AC
Loading...