AVer Vision U15 User Manual

AVerVision U15 is a USB powered document camera. It comes with 2 extra USB Hubs wherein you can connect
any external USB device such as keyboard, mouse, USB flash drive and more. An optional power adaptor can be
used in cases where the connected external USB device requires more power.

Parts

(1) Mic
(2) Camera sensor and LED
(3) Camera/LED/AF buttons

 Camera - capture a still image.
 LED - turn the overhead LED light on/off
 AF - Automatically Adjust the Focus.

(4) Camera holder
(5) Flex arm
(6) USB ports panel
(7) Power port panel
(8) Holder

Folding and Storing

The flex arm design allows you to freely bend the arm and store the camera head in the camera holder. Once you have properly
secured the camera head to the camera holder, you may now carry the AVerVision U15 from the built-in holder.

Adjust the camera head gently and DO NOT forcibly twist the camera head back and forth or around. It may break
the camera head off from the flex arm.

Connecting the AVerVision U15 to a computer

(4)

(1)

(6)

(7)

(5)

(8)

(2)

(3)

Connecting the External USB Device to AVerVision U15

Connecting a Power Adapter (Optional)

Connect a power adapter to a standard 100V~240V AC power outlet.

The power from the computer USB is sufficient enough to power AVerVision U15. However, if your laptop or desktop
USB port does not supply as much power as the USB specification says it should, then you may encounter problems
and need an external power supply.

The symptoms of insufficient power are typically the U15 randomly appearing and disappearing from Device Manager,
and accompanying beeps. If a power supply is required, the specification for the power adapter is 5Vdc, 3A.

General Specification

Image

Sensor

CMOS

Pixel Count

2 megapixels

Frame Rate

30 fps (max.)

TV Lines

600 (center)

RGB output

1920x1080, 1280x720,
1024x768, 640x480

Optics

Focusing

Auto

Shooting Area

431mm x 254mm @ 475mm height

17.7in x 10in @ 18.7in height

Zooming

8X Digital Zoom

Power

Power Source

DC 5V (3A), 100-240V, 50-60Hz from host
equipment or adapter (optional)

Consumption

1.9 Watts (lamp on); 1.7 Watts (lamp off)

Lighting

Lamp Type

LED light

Input/Output

USB mini

Power and signal connectivity to host
equipment

USB Hub (2x)

USB2.0

DC 5V Input

Power Jack

MIC

Built-in

Dimension

Operating

390mm x 248mm x 447.5mm (+/-2mm
include rubber foot)

Folded

259mm x 163mm x 38.79mm (+/-2mm
include rubber foot)

Weight

1.5KG (about 3.306lbs)

For detailed warranty information, please visit our website http://www.averusa.com and select the country
where the unit is purchased.

Power adapter

Wall outlet