AVer Vision F17HD Quick Manual

(1)
Power adapter
Wall outlet
(3-B)
(2)
Switch
AVerVision
Display Device
A. RGB
RGB OUTPUT
>
RGB INPUT
HDMI OUTPUT
>
HDMI INPUT
B. TV
CVBS
(use CVBS adapter)
>
VIDEO IN
(4)
75BOutput Display
Set the resolution to display the image on screen. This selection will be disabled in TV output mode.
(3-A)
AVerVision F17HD
Quick Guide
Remote Control
The remote control requires two (2) “AAA” size batteries (supplied), make sure batteries are installed properly before use.
Name
Name
Function
(18 )
(14 )
(11)
(7)
(8)
(5)
(2)
(1)
(22 )
(13 )
(4)
(3)
(15 )
(12)
(17)
(23)
(20)
(19)
(9)
(6)
(16)
(10)
(21)
(1) POWER
Turn the unit on/standby.
(2) CAMERA
Camera mode displays the video signal from the built-in camera.
(3) RECORDING
The recording function doesnt support on AVerVision F17HD.
(4) CAPTURE
Capture still image in Camera mode. In continuous capture mode, press this button again to stop.
(5) Visor
Cover part of the presentation screen and allow presenter to reveal the material as desire.
(6) ROTATE
Rotate the image by 90° in Camera mode and Playback mode.
(7) MENU PIP
Open and exit the OSD menu. Show a thumbnail size captured picture from the memory at the corner of the screen in Camera mode.
(8)
▲,▼,◄, & ►
- From remote control to pan the image when is above 2X in live mode or playback captured image mode.
- Move the selection in Playback mode and in OSD menu.
- Move the Spotlight frame and Visor screen cover.
(9) AUTO FOCUS
Adjust the focus automatically.
(10) ZOOM +/-
Increase/decrease the image magnification in camera and picture playback mode.
(11 ) ZOOM RESET
Reset zoom level to 100%.
(12) PLAYBACK
View the captured picture from the memory in 16-thumbnail images.
(13) PC 1/2
PC mode displays the video signal from the RGB/HDMI INPUT port of F17HD.
(14) FREEZE / STOP
Freeze live images.
For User Manual and Software, please visit the link below.
http://averusa.com/classroom-technology/support/
For Warranty information, please visit the link below.
http://www.averusa.com/classroom-technology/support/warranty.asp
Name
Function
(15) SPOTLIGHT
Call the Spotlight submenu. Spotlight overlays a box frame on the presentation screen. You can adjust the box size and move it around.
(16) SPLIT SCREEN
Divide the screen into two. One side displays the live image from the built-in camera and the other side displays 8-thumbnail size picture from the memory.
(17) MODE
Select from 4 type of modes: Sharp - adjust the contrast along the edges making text appear more
visible.
Graphics - adjust the gradient of image. Motion - increase frame rate. Sufficient lighting is required when using
this mode. Microscope - automatically adjust optical zoom for microscopic viewing.
(18) TIMER
Start/Pause/Stop the timer countdown and set the timer duration.
(19)
Make a selection in Playback mode and OSD menu.
(20) LAMP
Turn the overhead light on/off.
(21) BRIGHTNESS +/-
Adjust the brightness.
(22) DEFAULT
Reset at factory default setting.
(23) DEL
Delete the selected picture in Playback mode.
(1)
(10)
(2)
(21)
(20)
(14)
(6)
(9/19)
(7)
(8)
(4/23) (21)
(12) (10)
(24)
Name
Function
(24) Power LED
indicator
- Red: Standby
- Green: RGB/HDMI output
- Orange: TV output
P/N: 300AP0H7AD36
Loading...