AVer Vandal Dome Installation Guide
AVer Vandal Dome Type Camera
Installation Guide
Table of Contents
IMPORTANT SAFEGUARD ................................................................................................. 1
PACKAGE CONTENTS ....................................................................................................... 2
OPTIONAL ACCESSORIES ................................................................................................ 2
IP CAMERA PARTS ............................................................................................................. 3
IP CAMERA INSTALLATION ............................................................................................... 4
DEPLOYING NETWORK ........................................................................................................ 4
Network Connection via Ethernet Switch .................................................................... 4
Connect the power adapter to power jack of camera .................................................. 4
Power over Ethernet Connection ................................................................................ 5
CONNECTING EXTERNAL DEVICES TO I/O TERMINAL BLOCK .................................................... 6
INTERNAL CONNECTION DIAGRAM OF DI/DO ......................................................................... 6
MOUNTING THE IP CAMERA ................................................................................................. 7
FOCUSING THE IP CAMERA WITH BNC MONITOR ................................................................... 8
INSERTING MICROSD CARD TO SYSTEM ................................................................................ 9
RESETTING HARDWARE ................................................................................................. 10
TECHNICAL SPECIFICATIONS ........................................................................................ 11
SF2121H-DVR ................................................................................................ 11
FV2028-T/FV2028-TM..................................................................................... 15
FV3028-RT/FV3028-RTM ............................................................................... 19
FV2028/FV3028 .............................................................................................. 23
FCC NOTICE (CLASS B) .................................................................................................. 27
NOTICE .............................................................................................................................. 27
WARNING .......................................................................................................................... 27
GOVERNING LAW AND YOUR RIGHTS ................................................................ .......... 29
ENGLISH
Do not use power supply with different voltage
other than DC 12V / PoE.
Do not submerge the unit in the water.
Unplug the power of this unit as soon as smoke
or unusual odor is detected.
Unplug the power supply before cleaning. Use
only a lens cleaning cloth and never use
benzene, thinner, or other solvent for cleaning.
Do not attempt to service this unit by yourself.
Always refer all servicing to qualified service
personnel.
Do not place the unit in unsteady surface and
also do not drop the unit.
Keep the IP camera housing close and prevent
the dust from getting in the housing.
Important Safeguard
1
AVer Vandal Dome type
Camera
Software & Manual CD
L-type Wrench
Alignment Sticker
4 Screws
4 Washers
4 Plastic Anchors
Power Adapter (12V, 2A)
* The power adapter will vary depending on the
standard power outlet of the country where it is
sold. Depending on your package the power
adapter maybe included.
Package Contents
The following items are included in the package.
Optional Accessories
2
ENGLISH
(2)
(8)
(1)
(3)
(4)
(5)
(6)
(7)
No.
Function
(1)
Camera Lens
(2)
Light Sensor
(3)
Power Jack
(4)
BNC Jack (Video Out)
(5)
RJ45 Ethernet Jack
(6)
I/O Terminal Block
(7)
Phone Jack (Audio In)
(8)
Phone Jack (Audio Out)
IP Camera Parts
3
Ethernet Switch
Power Adaptor
Wall Outlet
IP Camera Installation
This section provides useful tips on how to adjust the IP camera to meet your needs.
Deploying Network
Network Connection via Ethernet Switch
Connect the RJ45 cable from the Ethernet switch to RJ45 Ethernet jack of camera
Connect the power adapter to power jack of camera
4
ENGLISH
PoE Switch
Wall Outlet
Power
Cable
PoE Injector
Ethernet Switch
Power over Ethernet Connection
AVer vandal dome type camera fully complies with PoE standard. It allows you to use PoE enabled
switch or PoE injector to transmit data and power thru single Ethernet cable.
PoE Enabled Switch Connection Diagram
PoE Injector Connection Diagram
5
No.
Function
(1)
Power 12V
(2)
Digital Output
(3)
Digital Input
(4)
Ground
[Note] Maximum power output is 12V/100mA
Connecting External Devices to I/O Terminal Block
Internal Connection Diagram of DI/DO
6
ENGLISH
1. Place the sticker on the wall surface. Then
spot the mark and drill the 5 holes indicated
on the sticker. If you are going to run the wire
through the lateral side, it’s not necessary to
drill through the big hole.
2. Insert the 4 plastic anchors in the wall.
3. Hook the IP Camera and place the washer on
the 4 screws. Use the hex socket cap bolt to
secure the IP camera.
4. After adjusting the focus and zoom control,
use the L-type wrench to secure the case of
IP camera from being tampered.
Mounting the IP Camera
7
VIDEO IN
BNC Port
LCD BNC Monitor
Focusing the IP Camera with BNC Monitor
The IP camera is supported with BNC analog video out jack which allows you to connect an analog
display devices such as an LCD BNC monitor for you to adjust the camera focus and zoom.
1. Connect the LCD BNC monitor to the BNC jack.
2. Open up the IP camera case.
3. Slightly loosen the focus and zoom control knobs and adjust the focus and zoom range. Slightly
tighten the focus and zoom knobs once you are done the adjustment.
8
Loading...