AVer U10 User Manual

U10
AVerVision U10 is a USB powered document camera. It comes with 2 extra USB Hubs wherein you can connect any external USB device such as keyboard, mouse, USB flash drive and more. A power adaptor is supplied and can be used in cases where the connected external USB device requires more power.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) Mic (2) Camera sensor and LED (3) Camera/LED/AF buttons
Camera - capture a still image. LED - turn the overhead LED light on/off AF - Automatically Adjust the Focus.
(4) Camera holder (5) Gooseneck arm (6) USB ports panel (7) Power port panel (8) Holder
Folding and Storing
The gooseneck design allows you to freely bend the arm and store the camera head in the camera holder. Once you have properly secured the camera head to the camera holder, you may now carry the AVerVision U10 from the built-in holder.
Adjust the camera head gently and DO NOT forcibly twist the camera head back and forth or around. It may break the camera head off from the gooseneck.
Parts
 
Connecting the AVerVision U10 to a computer
Desktop
Laptop
USB cable
Connecting the External USB Device to AVerVision U10
USB Mouse
USB Flash Drive
Connecting the Power Adaptor
Connect the power adapter to a standard 100V~240V AC power outlet.
The power from the computer USB is sufficient enough to power AVerVision U10. However, if your laptop or desktop USB port does not supply as much power as the USB specification says it should, then you may encounter problems and need an external power supply.
The symptoms of insufficient power are typically the U10 randomly appearing and disappearing from Device Manager, and accompanying beeps. If a power supply is required, the specification for the power adapter is 5Vdc, 3A.
Wall outlet
Power adapter
General Specification
86B86BImage
Sensor CMOS
Pixel Count 1.3 megapixels
Frame Rate 30 fps (max.)
TV Lines 600 (center)
RGB output 1280x720, 1024X768, 800X600
87BOptics
Focusing Auto
Shooting Area 355mm x 279mm (14in x 11in)
Zooming 8X Digital Zoom
88BPower
Power Source
Consumption 2.25 Watts (lamp on); 2.0 Watts (lamp off)
DC 5V, 100-240V, 50-60Hz from host equipment or adapter
89BLighting
Lamp Type LED light
90BInput/Output
USB mini
Power and signal connectivity to host equipment
USB Hub (2x) USB2.0
DC 5V Input Power Jack
MIC Built-in
91BDimension
Operating
Folded
390mm x 248mm x 447.5mm (+/-2mm include rubber foot)
259mm x 163mm x 38.79mm (+/-2mm include rubber foot)
Weight 1.5KG (about 3.306lbs)
Loading...