Page 1
www.avenview.com
1
4 Port VGA / Component /S-Video
Models
VGA-VS-4X1
/ Composite Switch with Audio
User’s Guide
© 2008 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual
property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes
no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied
warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly
prohibited.
Page 2
www.avenview.com
2
Table of Contents
Section 1: Getting Started ...................................................................................................................... 3
1.1 Important Safeguards ............................................................................................................ 3
1.2 Safety Instructions ................................................................................................................. 3
1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4
1.4 Introduction ........................................................................................................................... 4
1.5 Features ................................................................................................................................. 5
1.6 Package Contents ................................................................................................................... 5
1.7 Before Installation.................................................................................................................. 5
1.8 Panel Description ................................................................................................................... 6
1.9 IR Remote Control .................................................................................................................. 7
Section 2: Installation ............................................................................................................................. 8
2.1 Pin Definition ......................................................................................................................... 8
Section 3: Specifications ......................................................................................................................... 9
Page 3
www.avenview.com
3
Section 1: Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
1.2 Safety Instructions
The VGA-VS-4X1 4x1 VGA/Component/S-Video/Composite Switch with Audio has been tested for
conformance to safety regulations and requirements, and has been certified for international use. However,
like all electronic equipments, VGA-VS-4X1 should be used with care. Please read and follow the safety
instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
Page 4
www.avenview.com
4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
The Avenview VGA-VS-4X1 4x1 VGA/Component/S-Video/Composite Switch with Audio receives and
amplifies up to 4 VGA inputs, perfectly switches the desired input to the VGA equipped monitor or receiver.
The switch supports VGA video up to 350MHz. The switch re-transmits the signal without degradation and the
longest transmission is up to 65m (210ft). Therefore, VGA-VS-4X1 offers the most convenient and cost
effective means for swift switch of high quality PC graphics and HDTV videos with crystal clear audio in the
market. With equipped audio switch, VGA-VS-4X1 is ideal solution for boardroom, showroom, and exhibition.
The control of VGA-VS-4X1 is versatile and easy through the IR remote control, the push button on front panel,
or the RS-232 control on rear panel.
Page 5
www.avenview.com
5
1.5 Features
- VGA / Component / S-Video / Composite Switch with 350MHz bandwidth
- Up to 4 graphics / video inputs
- LED indication
- Automatic detection of the VGA / Component input
- Amplified video output with transmission length up to 65m (210 feet)
- Multiple control by IR remote, push button, and RS232
- 1U Rack Mountable
- Easy installation
1.6 Package Contents
Before you start the installation of the converter, please check the package contents.
- VGA-VS-4X1 x 1
- IR Remote Control x 1
- 5 x VGA to Component breakout cable (optional) x 1
- Power Adapter (+5VDC) x1
- User’s Manual x1
1.7 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Page 6
www.avenview.com
6
1. Push Button for Input Switch
2. Infrared Sensor
3. LED Indicator for Power
4. LED Indicator for VGA Input #1
5. LED Indicator for VGA Input #2
6. LED Indicator for VGA Input #3
7. LED Indicator for VGA Input #4
8. RS232 Control Port
9. 3.5mm Audio Socket for Audio Source #4
10. 3.5mm Audio Socket for Audio Source #3
11. 3.5mm Audio Socket for Audio Source #2
12. 3.5mm Audio Socket for Audio Source #1
13. 3.5mm Audio Socket for Selected Output
14. VGA Input Source #4
15. VGA Input Source #3
16. VGA Input Source #2
17. VGA Input Source #1
18. Selected VGA Output
19. 5V DC Power Jack
1.8 Panel Description
FRONT PANEL
REAR PANEL
Page 7
www.avenview.com
7
1.9 IR Remote Control
Page 8
www.avenview.com
8
Section 2: Installation
Follow these instructions for installation of VGA-VS-4X1:
1. Ensure VGA-VS-4X1 and all other source devices are turned off
2. Connect VGA / Component / S-Video / Composite display / projector to the output of VGA-VS-4X1
3. Connect the VGA / Component / S-Video / Composite source devices to input of VGA-VS-4X1
4. Plug power adapter to 5V DC power jack of VGA-VS-4X1
5. Use IR Remote control or push button on the front panel to switch between inputs, or connect a
computer through RS232 port to switch the input sources.
2.1 Pin Definition
VGA
S-Video
Page 9
www.avenview.com
9
Section 3: Specifications
Item
Description
Model
VGA-VS-4X1
Supported Input / Output
VGA / Component / S-Video / Composite
Video Bandwidth
350 MHz
Supported Resolutions
1080p (60), WUXGA (1920x1200x60Hz), UXGA (1600x1200x60Hz)
Transmission
HD (720p/1080i) up to 65 meter (210 feet)
Audio Support
Analog Stereo
Input
4 x VGA (Component / S-Video / Composite through adapters)
4 x 3.5mm Analog Stereo Audio
1 x RS232
Output
1 x VGA (Component / S-Video / Composite through adapters)
1 x 3.5mm Analog Stereo Audio
VGA Connector
HD-15 (15 pin D-Sub female)
RS232 Connector
DE-9 (9 pin D-Sub female)
Audio Connector
3.5mm Earphone Jack for Analog Stereo Audio
Input Selection
IR Remote / Push Button / RS232
Dimensions
1’ 5.3” x 2.6” x 1.7” (L x W x H)
Weight
2.2 lbs
Power Supply
5V 4A DC
Power Consumption
7 Watts (max)
Operating Temperature
0~40°C [32~104°F]
Storage Temperature
-20~60°C [-4~140°F]
Relative Humidity
20~90% RH [no condensation]
Page 10
www.avenview.com
10
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and
non-infringement.
Loading...