Avenview SW-HDM3D-C5-8X8 User Manual

www.avenview.com

1

8x8 HDMI Matrix Switch with 3D
over CAT-5 with IR Pass-Through

Model #: SW-HDM3D-C5-8X8

© 2009 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products

www.avenview.com

2

including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.

Table of Contents

Section 1: Getting Started ...................................................................................................................... 3

1.1 Important Safeguards ............................................................................................................ 3

1.2 Safety Instructions ................................................................................................................. 3

1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4

1.4 Introduction ........................................................................................................................... 4

1.5 Package Contents ................................................................................................................... 6

1.6 Before Installation.................................................................................................................. 6

1.7 Panel Description ................................................................................................................... 7

1.7.1 SW-HDM3D-C5-8X8 Front Panel ........................................................................................... 7

1.7.2 SW-HDM3D-C5-8X8 Rear Panel ............................................................................................ 7

1.7.3 HDM3D-C5SW-R .................................................................................................................... 8

1.7.4 Dip Switch for EDID & Audio Settings (SW1 – SW8).............................................................. 9

1.7.5 SW Main Dip Switch for Firmware Update ......................................................................... 10

1.8 IR Control Patch ................................................................................................................... 11

1.9 Installation (SW-HDM3D-C5-8X8) ........................................................................................ 12

1.10 Operation and IR Control ..................................................................................................... 13

1.10.1 Source Side ........................................................................................................................ 13

1.10.2 Display Side ....................................................................................................................... 14

1.11 RS232 Serial Port Control ..................................................................................................... 15

1.11.1RS232 Commands .............................................................................................................. 17

Section 2: Specifications ....................................................................................................................... 18

www.avenview.com

3

Section 1: Getting Started

1.1 Important Safeguards

Please read all of these instructions carefully before you use the device. Save this manual for future

reference.

What the warranty does not cover

Any product, on which the serial number has been defaced, modified or removed.



Damage, deterioration or malfunction resulting from:



Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized



product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.



Any damage of the product due to shipment.



Removal or installation of the product.



Causes external to the product, such as electric power fluctuation or failure.



Use of supplies or parts not meeting our specifications.



Normal wear and tear.



Any other causes which does not relate to a product defect.



 Removal, installation, and set-up service charges.

1.2 Safety Instructions

The Avenview SW-HDM3D-C5-8X8 HDMI Matrix Switch with 3D over CAT-5 with IR Pass-Through has been
tested for conformance to safety regulations and requirements, and has been certified for international use.
However, like all electronic equipments, the SW-HDM3D-C5-8X8 should be used with care. Read the following
safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

Do not dismantle the housing or modify the module.



Dismantling the housing or modifying the module may result in electrical shock or burn.



Refer all servicing to qualified service personnel.



Do not attempt to service this product yourself as opening or removing housing may expose you to



dangerous voltage or other hazards

 Keep the module away from liquids.
 Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid

falls or spills on to the housing, unplug the module immediately.

 Have the module checked by a qualified service engineer before using it again.
 Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before

cleaning.

www.avenview.com

4

1.3 Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this

equipment.

1.4 Introduction

The Avenview SW-HDM3D-C5-8X8, HDMI Matrix Switch with 3D over CAT-5 with IR Pass-Through provides the
most flexible and cost effective solution in the market to route high definition video sources plus
multi-channel (up to 7.1 channel) digital audio from any of the four HDMI sources to the remote displays at
the same time. Through low cost Cat-5/5e/6 LAN cables, not only high quality video and audio can be
transmitted to the display sites, but also users can switch among four HDMI sources using the push-in button
or remote control. With single power design at the source site, each remote module is easily installed without
power supply. Furthermore, the built-in IR extension function makes users at display site access the DVD
player, PS3 or any HDMI supported devices directly.

www.avenview.com

5

www.avenview.com

6

- Silicon Image chipset embedded for best quality, compatibility and reliability

- Support HDMI Deep Color & full 3D

- HDCP compliant

- Allows any source to be displayed on multiple displays at the same time

- Allows any HDMI display to view any HDMI source at any time

- Supports 7.1 channel digital audio

- Supports default HDMI EDID and learns the EDID of displays

- The matrix master can switch every output channels to any HDMI inputs by push-in button, IR remote

control, or RS-232 control

- Allows controlling local HDMI sources such as DVD and TiVo by attached IR extender from remote

receiver to matrix master

- Allows to control matrix master through IR remote control at remote receiver’s site

- Extends video signal up to 35m (115 feet) over CAT5e at 1080p and likely longer with better HDMI

source device, better grade HDMI display, and better quality solid CAT6 cable

- Easy installation with rack-mounting and wall-mounting designs for master and receiver respectively

- Fast response time – 2~5 seconds for channel

1.5 Package Contents

Before you start the installation of the converter, please check the package contents.

- SW-HDM3D-C5-8X8 x 1

- HDM3D-C5SW-R x 8

- IR Transmitter x 8

- IR Receiver x 1

- IR Remote Control x 1

- Rackmounting Ear x 2

- Power Adapter (+5VDC, 4A) x 1

- User’s Manual x 1

1.6 Before Installation

 Put the product in an even and stable location. If the product falls down or drops, it may cause an

injury or malfunction.

 Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high

humidity.

 Use the DC power adapter with correct specifications. If inappropriate power supply is used then it

may cause a fire.

 Do not twist or pull by force ends of the optical cable. It can cause malfunction.