Avenview C-HDM-COMPVGA-A User Manual

VIDEO WALLS VIDEO PROCESSORS

VIDEO MATRIX SWITCHES

EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES

Control Your Video

© 2015 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.

HDMI TO VGA/COMPONENT

CONVERTER

Model #: C-HDM-COMPVGA-A

Rev. 6.15

Military Residential

Medical Aviation

Education Industrial

Corporate

House Of Worship

www.avenview.com

Product Application & Market Sectors

Page|2

www.av enview.com

1.1 IMPORTANT SAFEGUARDS ................................................................................................. 3

1.2 SAFETY INSTRUCTIONS ...................................................................................................... 3

1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ........... 4

2. INTRODUCTION AND FEATURES..................................................................................... 5

2.1 PACKAGE CONTENTS......................................................................................................... 5

2.2 BEFORE INSTALLATION ...................................................................................................... 6

2.2.1 Installation (C-HDM-COMPVGA-A) ............................................................................. 6

3 APPLICATION DIAGRAM ..................................................................................................... 7

2.2.2 Cable Specification ........................................................................................................ 6

SECTION 5: SPECIFICATIONS ....................................................................................................... 10

TABLE OF CONTENTS

3.1

PANEL DESCRIPTION ..............................................................................................................8

3.1.1 FRONT PANEL (C-HDM-COMPVGA-A) ...........................................................................8

3.1.2 REAR PANEL (C-HDM-COMPVGA-A) ................................................................................8

4.

GENERAL TROUBLESHOOTING..........................

.............................................................. 9

Page|3

www.avenview.com

SECTION 1: GETTING STARTED

1.1 IMPORTANT SAFEGUARDS

Please read all instructions carefully before you use the device. Save this manual for future reference.

What the warranty does not cover



Any product, on which the serial number has been defaced, modified or removed.



Damage, deterioration or malfunction resulting from:



Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.



Repair or attempted repair by anyone not authorized by us.



Any damage of the product due to shipment.



Removal or installation of the product.



Causes external to the product, such as electric power fluctuation or failure.



Use of supplies or parts not meeting our specifications.



Normal wear and tear.



Any other causes which does not relate to a product defect.



Removal, installation, and set-up service charges.

1.2 SAFETY INSTRUCTIONS

The C-HDM-COMPVGA-A HDMI to VGA/Component Converter has been tested for conformance to safety
regulations and requirements, and has been certified for international use. However; like all electronic
equipments, the C-HDM-COMPVGA-A should be used with care and precaution. Read the following safety
instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

Do not dismantle the housing or modify the module.

Dismantling the housing or modifying the module may result in electrical shock or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing housing may expose you to

dangerous voltage or other hazards.

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. Should an object or

liquid falls or spills on to the housing, unplug the module immediately.

Have the module checked by a qualified service engineer before using it again.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.

Page|4

www.avenview.com

1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the users authority to operate this
equipment.

Warning Symbols

Description

ONLY USE THE PROVIDED POWER

CABLE OR POWER ADAPTER SUPPLIED.

DO NOT TAMPER WITH THE

ELECTRICAL PARTS. THIS MAY RESULT IN

ELECTRICAL SHOCK OR BURN.

DO NOT TAMPER WITH THE UNIT. DOING

SO WILL VOID THE WARRANTY AND

CONTINUED USE OF THE PRODUCT.

THE VIDEO BOARDS ARE VERY SENSITIVE

TO STATIC. PLEASE ENSURE IF RACK

MOUNTED OR INSTALLED ON A SURFACE,

IT SHOULD BE IN A GROUNDED

ENVIRONMENT.

Page|5

www.avenview.com

2. INTRODUCTION AND FEATURES

Avenview C-HDM-COMPVGA-A HDMI down converter with digital and analog audio support was designed to
accept a HDMI signal and convert Full HD along with audio to either VGA+SPDIF/LR sink or YPbPr+SPDIF/LR sink
to a monitor or projector.

FEATURES:

- Support video input: HDMI;

- Toggle switch YPbPr/VGA;

- Support audio output: SPDIF (Optical) + R/L analog;

- Support output: Support up to PC UXGA and Video1080I (50/60Hz);

- HDCP compliant;

- LED: Source / Sink working, LED

- No loss of quality;

- DC 5V/1A power supply.

2.1 PACKAGE CONTENTS

Before you start the installation of the converter, please check the package contents.

1

C-HDM-COMPVGA-A

2

3

Power Adapter

User Guide

Page|6

www.avenview.com

2.2 BEFORE INSTALLATION









Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.

Do not place the product in high temperature (over 50°C), low temperature (under 0°C) or

high humidity.
Use the DC power adapter with correct specifications supplied with the unit. If improper
power supply is used the unit may malfunction and cause a fire.
Do not twist or pull by force ends of the video

cable. It can cause malfunction.

2.2.2 CABLE SPECIFICATIONS

To achieve best results with our C-HDM-COMPVGA-A we highly recommend a premium quality 26
or 24 AWG HDMI cable with the below specifications to maintain signal integrity and distances.

 Length: 5m (16ft) to 15m (50ft)
 Bandwidth: 10.2 Gbps data transfer rate
 Supports Resolution: Up to 3840x2160 @ 24Hz and 4096x2160 @ 24Hz, 1080p @ 24Hz / 50/60Hz/3D
 Conductor gauge: 26 / 24 AWG
 Deep Color
 3D Capable
 CEC
 Ethernet Channel
 Audio Return Channel
 Connector 1: HDMI (Type A) Male
 Connector 2: HDMI (Type A) Male

FEATURES:

2.2.1 INSTALLATION (C-HDM-COMPVGA-A )

1. Connect your source device such as digital signage player to HDMI Input on the C-HDM-COMPVGA-A.

2. Connect all displays/screens to VGA/COMPONENT Outputs on the C-HDM-COMPVGA-A.

3. Power up the C-HDM-COMPVGA-A.

4. Switch on all devices connected.

Page|7

www.avenview.com

3. APPLICATION DIAGRAM

Page|8

www.av enview.com

3.1.1 FRONT PANEL (C-HDM-COMPVGA-A)

3.1

PANEL DESCRIPTION

1.

2.

VGA / COMPONENT Switch

3.

4.

5.

HDMI Input

6.

Power Supply Connector

3.1.2 REAR PANEL (C-HDM-COMPVGA-A)

7.

VGA Output

Audio Output

Power Indicator

Component Output

8.

Optical Output

1

2

3

4

5

6

7

8

4.

GENERAl TROuBlESHOOTING

PROBLEM

SOLUTION

No Power

- Check the power connector is correctly inserted into the power connector socket.

- Check the power switch ON status.

No Picture

- Make sure the TV is on and is connected to the converter.

- Check if the signal source is on.

- Check power supply connection to the converter.

- Check HDMI cable quality (compliant with the HDMI V1.3).

Picture Not Clear

- Check HDMI cable quality (HDMI Cable is compliant with the HDMI V1.3).

Page|9

www. avenview.com

Page|10

www.avenview.com

Technical

Unit Description

HDMI / DVI to Component / VGA with Audio Converter

HDMI Compliance

HDMI 1.3b

HDMI Connector

Type A (19 pin female)

Video Support

Single Link: 1080p 60, WUXGA (1920x1200@60Hz)

Component Video: 720p / 1080i

Input

1 x HDMI

Audio Support

SPDIF(Optical)+R/L Analog

Output

1 x VGA, 1 x Optical Digital 1 x YPbPr ComponentAudio 1 x L/R Stereo Audio

Video Bandwidth

Single Link: 225MHz (5.1Gbps)

Enclosure

Metal case

Dimensions
(L x W x H)

Modelel

438mm x 438mm x 89mm [17.25" x 17.25" x 3.5"]

Package

494 x 494 x 100mm [19.4" x 19.4" x 3.9"]

Carton

510 x 510 x 252mm [20" x 20" x 10"]

Weight

Model

380 g [0.84 lb]

Package

410 g [ 0.9 lb]

Power supply

Input: AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A

Max Working Current 600mA

Operation temperature

0~40°C [32~104°F]

Storage temperature

-20~60°C [-4~140°F]

Relative humidity

20~90% RH [no condensation]

ITEM

SECTION 5: SPECIFICATIONS

DESCRIPTION

Mechanical

www.avenview.com

Avenview Warranty Certificate

AVENVIEW CORP. (“Aven

view”) warrants Avenview-branded product(s) contained in the original packaging against defects in materials and workmanship when used
normally in accordance with Avenview's enclosed manual guidelines for a period of THREE (3) YEARS from the date of original retail purchase - Warranty Period. Avenview’s
published guidelines include but are not limited to information contained in technical specifications, user manuals and service communications.

LABOR: During the Warranty Period of THREE (3) YEARS, Avenview will repair or replace the product(s) at no cost using new or used parts equivalent to novel performance
and reliability if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Labor applicable to product(s) after Warranty Period. For labor costs,
please contact [e-mail].

PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if
the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact

[e-mail].

To obtain Warranty: (a) proof of purchase in the form of a bill of sale or receipted invoice reflecting that the registered product(s) is within warranty period must be presented

to obtain warranty service; (b) product(s) must be registered at time of purchase. Failure to do so will result in applicable parts and labor charges. Returning product(s) must
be shipped in Avenview’s original packaging or in packaging pertaining equal degree of protection to Avenview’s. Both Avenview and purchaser are responsible for freight
charges and brokerages when shipping the product(s) to the receiver.

NOT COVERED BY THIS WARRANTY

This warranty does not apply to any non-Avenview branded product(s); non-registered Avenview product(s). This warranty does not apply: (a) to cosmetic damage, including
but not limited to scratches, dents and broken cords; (b) to damage caused by use with another product; (c) to damage caused by accident, abuse, misuse, liquid contact, fire,
earthquake or other external cause; (d) to damage caused by operating the Avenview product(s) outside Avenview’s manuals or guidelines; (e) to damage caused by service
performed by anyone who is not a representative of A venview or an Avenview authorized personnel; (f) to defects caused by normal wear and tear or otherwise due to the
normal aging of the Avenview product(s), or (g) if any serial number has been removed or defaced from the Avenview product(s).

AVENVIEW IS NOT LIABLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR

CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR
ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS;
LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATI ON; LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA; OR ANY INDIRECT
OR CONSEQUENTIAL LOSS OR DAMAGE REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.

Some states do not allow the inclusion or limitation of incidental or consequential damages, or allow limitations on duration implements of the Warranty Period; therefore the above limitations or
exclusions may not be applicable to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

275 Woodward Av

enue, Kenmore, NY 14217

1.866.508.0269

TECHNICAL SUPPORT

Disclaimer

While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of
Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this
documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages
in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.

Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, function or design.
With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties regarding such products, including but
not limited to, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement.

Control Your Video

USA Head Office

Office Avenview Corp.
275 Woodward Avenue

Kenmore, NY14217
Phone: [phone]
Fax: +1.866.387-8764

Email: [e-mail]

Canada Sales

Avenview
151 Esna Park Drive, Units 11 & 12
Markham, Ontario, L3R3B1

Phone: [phone]
Fax: [phone]

Email: [e-mail]

Avenview Europe

Avenview Europe
Demkaweg 11
3555 HW Utrecht
Netherlands
Phone: [phone]
Email: [e-mail]

Avenview Hong Kong

Unit 8, 6/f., Kwai Cheong Centre,
50 Kwai Cheong Road,
Kwai Chung, N.T.
Hong kong
Phone: [phone]
Email: [e-mail]