AVE TCPIP232 Specsheet
TT
CPIP232 Client SerCPIP232 Client Ser
T
CPIP232 Client Ser
TT
CPIP232 Client SerCPIP232 Client Ser
The TCPIP232 Client Server Interface is designed to deliver POS / Cash Register T ransaction Data to a compatible DVR over an existing Ethernet LAN connection with in several
configurations and protocols.
Client Mode
The Client Mode connects directly to a POS / Cash Register via RS-232 or RS-485 to recieve
the POS transaction data. This configuration is one Client for one POS.It also has the ability
to connect to the A VE RS-485 Network as a Master or Hydra which allows one Client to read
data from up to 16 VSI-Pro Max. The POS transaction data for either configuration can be
assigned a single IP address with a unique Port number for each POS so a compatible DVR
can determine the origination of the POS transaction data.
The POS transaction data for either configuration can also be assigned an ID and assigned
a single IP address with a single Port number which then is translated by the Server Mode to
output data of up to 16 POS in the A VE Protocol of Generic ASCII, VSI-ADD or Vnet via RS232 or RS-485 to compatible DVRs..
vv
v
vv
erer
er
erer
Server Mode
The Server Mode has the ability to read the POS transaction data that any Client has placed
on the LAN network in either TCP or UDP format and output this data in either RS-232 or RS485 format with the A VE Generic ASCII, VSI-ADD or Vnet protocol. This dat a then connects
to a compatible DVR or a VSI-Pro Max for overlay . The Server merely passes the data to its
Serial port that is sent from any Client or Hydra on the LAN. Therefore you must set the
protocol appropriately and similarly for all Clients on the LAN.
Summary
The TCPIP232 Client Server is one device that can be configured in numerous ways as
either a Client or Server connecting directly to POS / Cash Registers or via the A VE RS-485
Network. Multiple Clients or multiple Servers can be placed on the same network to achieve
any configuration or data speed required.
TCPIP232 Client Server LED Indicators(sequence from left to right)
GREEN POWER TCPIP-232 Client Server Power Status
RED NET Sending / Receiving RS-232 / RS-485 Data Packet
LAN Network LEDs
YELLOW SPEED OFF = 10Mbps, ON = 100Mbps Ethernet.
GREEN LINK LAN St atus, ON = Ready OFF = Not ready
RE D RECEIVE TCPIP-232 Client Server Send / Receive data from LAN
Client Mode connects with DVR with Multiple Listening Ports Text Insertion
The DVR supports multiple IP Ports for receiving data packets from up to 16 Clients.
DVR
192.168.0.200
Listening on port
10101 - 10116
CAT-5
TCPIP232 Client
192.168.0.101
Destination IP
192.168.0.200
Destination
Port 10101
VSI-Pro MAX
CAT-5
RS-232/485
RS-232/485
CAT-5
TCPIP232 Client
192.168.0.102
Destination IP
192.168.0.200
X16
Destination
Port 10102
CAT-5
Rounter/Network
Switcher
TCPIP232 Client
192.168.0.116
Destination IP
192.168.0.200
Destination
Port 10116
Master / Hydra Mode Connects with DVR with Multiple Listening Port s Text Insertion
The DVR supports multiple IP Ports for receiving data packets from up to 16 Clients. The
Client Hydra mode supports the A VE RS-485 Network Protocol to up to 16 VSI-Pro Max
connected to a POS.
DVR
192.168.0.200
Listening on port
10101 - 10116
CAT-5
RS-485
CAT-5
TCPIP232
Hydra
Destination IP
192.168.0.200
Destination
Port 10101 -10116
Rounter/Network
Switcher
VSI-Pro MAX
ID 1
RS-232/485
RS-485
X16
VSI-Pro Max
ID 16
Server Mode connect with Client Mode
The DVR receives RS232 or RS485 input in the VSI-ADD or Vnet protocol for Database
storage or T ext Insertion from the Server mode. The Server has received a dat a packet from
Client or Master Hydra Client Mode with single or multiple IPs in either TCP or UDP Protocol.
To TCPIP232 Clients or Hydras
in any combination see the
above connections
Rounter/ Network
Switcher
RS232 or RS485
VSI-ADD or Vnet
DVR
Loading...