
Table of Contents
Safety ....................................................................................... 2
Important Safety Instructions ........................................................... 3
Precautions...................................................................................... 4
Suspension ...................................................................................... 4
Mounting .......................................................................................... 4
Description ................................................................................ 5
Features ............................................................................ 5
Setup ........................................................................................ 6
Power Linking ..................................................................... 6
Menu Map .......................................................................... 6
Operation ........................................................................... 7
DMX Channel...................................................................... 7
Specifications............................................................................ 8

Safety
Important Safety Information
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT OVEREXPOSE THIS FIXTURE
TO RAIN OR MOISTURE.
WARNING: CONNECT ONLY TO MAINS POWER SUPPLY WITH A PROTECTIVE EARTHING
CONNECTION.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE REAR COVER OR
ATTEMPT TO OPEN THE LIGHTING FIXTURE. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER
ALL SERVICING TO QUALIFIED PERSONNEL.
1. Read this manual carefully.
2. Keep this manual safe for future reference.
3. Follow all warnings and recommendations.
4. Do not operate or store near water.
5. Do not expose the fixture to dripping or splashing liquid, and ensure that no objects
containing liquid are placed on this fixture.
6. Clean only with a dry cloth.
7. Do not install or operate near any heat sources such as radiators, gas heaters, stoves, or
other heating apparatus.
8. Only use attachments and accessories specified by the manufacturer.
9. Do not block any ventilation openings, including sound ports.
10. Install in accordance with the manufacturer’s instructions.
11. Do not obstruct or remove the ground plug from the light, doing so may cause electric shock
resulting in serious injury or death.
12. Protect the power cord from being walked on, pinched, or rolled over.
13. Unplug the fixture during electrical storms and power outages.
14. Refer all servicing to a qualified service technician. Servicing is required when the fixture no
longer operates, fails to power on, or emits an electrical smell or sound.
15. To completely disconnect AC power from this fixture, the power supply cord must be
unplugged.

Precautions
If an AVE lighting fixture is used outdoors on a sunny day, ensure that it is in a shaded area and is
well ventilated to help prevent overheating.
Do not use AVE lighting fixtures in environments that are below 0°C OR exceed +40°C.
Suspension
Suspending any object is potentially dangerous and should only be attempted by qualified
individuals with thorough knowledge of the techniques and regulations for suspending objects. It is
the responsibility of the installer to ensure all fixtures and effects are installed correctly. AVE
strongly recommends inspecting installed systems every 6 months for signs of weakness or damage.
If any damage or weakness is detected then remedial action should be taken immediately. The user
is responsible for making sure the wall, ceiling, or structure is capable of supporting all objects
suspended overhead. Any hardware used to suspend a fixture not associated with AVE is the
responsibility of others.
Mounting
The Cobra Wash 100 includes a hanging bracket that can be fitted using a hex tool (not included)
allowing you to hang the fixture upside down. It is strongly advised to install the safety loop and fit
an appropriate safety cable* when hanging the fixture.
*This is a secondary fall arrest; in the event the yoke or clamp fail, the fixture is safe from causing
serious injury or damage

Description
The AVE Cobra Wash 100 is a compact and high-output LED moving head wash fixture that provides
a vivid colour wash for your dance floor or stage area. Fitted with 4x 12watt LED diodes, each with
Hex Colour (RGBAW+UV) Technology allowing you to mix any colour you imagine. The moving yoke
has a wide pan and tilt range with smooth movement creating an amazing effect.
The Cobra Wash 100 can be mounted on a flat surface or upside down using the included hanging
bracket and safety loop. The digital display can also be inverted when hung making it easier to
navigate the menu.
Out of the box, the Cobra Wash 100 has ‘Auto’ and ‘sound active’ modes for plug-and-play operation
with an amazing visual effect. The master slave mode also lets you create coordinated lighting shows
without the need for DMX. For use with other lighting fixtures the Cobra Wash 100 can be
connected to a DMX controller and manually controlled/programmed via the 3-pin DMX connectors.
Features
High-output 4x 12W LEDs
Hex Colour diodes (RGBAW+UV) for full colour spectrum mixing
Wide pan and tilt ranges with smooth movement
3-Pin XLR connections for DMX control
Built-in Auto programs; Auto / Sound
Master / Slave operation
Static colour settings
Mounts on any flat surface or upside down on a lighting rig

Preset Colour (24 Presets)
Manual Red Colour 0 - 255
Manual Green Colour 0 - 255
Manual Blue Colour 0 - 255
tESt - Auto Test All Functions
Displays Temperature of Fixture
Setup
To set up your AVE Cobra Wash 100 follow the below steps;
1. Mount the item on your lighting stand or on the floor
2. Connect the AC power cord from a grounded mains 240v power source
3. Power the fixture/s on from the mains socket
4. Select the desired operation mode and press ‘enter’
5. Wait approx. 10sec for the setting to take effect
Menu Map

Press to access main menu, or change function once the fixture is on
Cycles upwards through the menu and options
Cycles downwards through the menu and options
Press to select a menu option or save a setting
Colour Macro (32 presets)
Operation
To access the menus and functions of the Cobra Wash 100, use the four (4) buttons located under
the main LCD control screen.
DMX Channels
9 CH Control
15 CH Control

4 x 12W Hex-Colour LED Diodes
Red, Green, Blue, Amber, White, Ultra Violet
Specifications