AVE Analog EV 2x150, Analog EV 2x240 User Manual

Page 1
User guide Analog EV 2x150 November 2016
Vertriebs­ Entwicklungsgesellschaft mbH
Analog EV 2x150
User guide
Page 2
User guide Analog EV 2x150 Seite 2
1. Introduction
Thank you for choosing the AVE „Analog EV 2x240“. „Analog EV 2x240“ is an analogue two- channel-amplifier with a Sinus-performance about 2x240 watt, available in 4 Ohm- and 100V­technique. The device meets all professional requirements of reliability, flexibility and sound. It is applicable by itself or as supplement to an existing system. The clip-protective circuit for every thinkable situation and a first class manufacture of high­quality components offer an optimum of security and quality. Thanks to its flexibility the amplifier can be adapted optimally to all acoustical surroundings. The „Analog EV 2x240“ can be interconnected with further amplifiers. This two-channel-amplifier is applicable in many applications due to its wide range of functions and its high quality sound.
2. Security advices
Please read the information provided in this manual before starting up the unit.
WITHIN THIS UNIT THERE IS DANGEROUS VOLTAGE PRESENT CONSTITUTING A RISK OF ELECTRIC
SHOCK. DO NOT OPEN THE COVER. INTERNAL MODIFICATIONS ARE TO BE COMPLETED BY AUTHORIZED PERSONNEL ONLY.
The AVE „Analog EV 2x240“ is equipped with an approved power cable. At one end there is a three-pole mains connection socket (rubber connector) and at the other end a CE­standardized Schuko-socket to connect to a 230 V/ 50 Hz voltage source. Please take care, not to damage these power cords. Do not use any defective or damaged power cords!
Page 3
User guide Analog EV 2x150 Seite 3
3. Description of components and functions
LED On
After actuation the power switch button the
LED lights up
LED Prot
Disturbance, amplifier is
in protect-modus
LED Sign
Source is in touch
LED Clip
Optical display of
overdriven entrance
Power
With the power switch the device is
switched on or off
LEDs
On, Prot, Sign und Clip
Mains connection
The unit is supported with power, when the cable to a 230V alternating current source
Volume control
With these volume controls you can regulate the level oft the signal sources
optimally
Fuse
3,15 A
Outputs
Connection terminals
Inputs: XLR
Page 4
User guide Analog EV 2x150 Seite 4
4 Technical features:
Analog Hi-Fi-two-channel-amplifier. Modern SMD-technique, convincing sound and impulse response. Available In 4-Ohm and 100 V-technique. protection circuit for direct current short circuit, thermic overload, open exit. Inputs: XLR Outputs: connecting terminals.
Mains voltage: 230 Volt Power consumption: 208 VA Rated power (RMS): 2x150 Watt Distortion factor:: < 0,1 Frequency response:: 70 Hz – 15.000 Hz Unweighted signal-to-noise ratio: >90 dB Input sensitivity: 0 dBu/775 mV Max. input signal: 7 V Loudspeaker outputs: Line 100 V, 70 V, 50 V, 4 Ohm Starting temperature for ventilator: continuous adjustable ventilator Dimensions (width x height x depth): 483 x 88 x 338 mm: Weight: 13 kg
Technical modifications reserved
Notice:
ALL AVE mbH DESIGNE SPECIFICATIONS; FILES; DRAWINGS: TABLETS; LISTS AND OTHER
DOCUMENTS ARE BEING PROVIDED “AS IS”:
AVE mbH MAKES NO WARRANTIES; EXPRESSED; IMPLIED: STATUTORY OR OTHERWISE WITH RESPECT TO THE MATERIALS; AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NONINFRINGEMENT; MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE:
Information furnished is believed to be accurate and reliable. However, AVE mbH assumes no responsibility for the consequences of use of such information or for any infringement of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of AVE mbH. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. AVE mbH products are not authorized for use as critical components in life
support devices or systems without express written approval of AVE mbH Corporation.
Trademarks:
AVE mbH and the AVE-logo are trademarks or registered trademarks of AVE mbH in Germany and
other countries. Other company and product names may be trademarks of the respective companies
with which they are associated. Copyright © 2016 AVE mbH. All rights reserved.
Consulting Planning Developing Assembly of electroacoustic sound systems AVE GmbH Gustav-Rau-Straße 6 74321 Bietigheim-Bissingen Germany . Telefon +49 (0)7142 78879-0 Fax +49 (0)7142 78879-18
info@ave-stuttgart.de www.ave-stuttgart.de
Loading...