AVE 8PSWT Specsheet

8 Position

Switcher

The 8PSWT is an eight position position alarming, homing, bypassing sequential video
switcher. Two alarm inputs via rear cage clamp connectors allow homing to camera 4 or
camera 8 in a manual mode. Upon release of the alarm inputs, the switcher continues from
where it left off prior to the alarm occurance. Front panel LED indicators show which camera
is currently being homed.

The three position toggle switches allow instant manual homing, camera bypassing except
upon alarm, and auto sequencing mode. There are two separate recessed Dwell pots to
control the dwell time of cameras 1-4 and 5-8 independently.The 8PSWT is powered by
9-12VDC and is supplied with a UL approved wall transformer.

Specifications

Video Inputs (Parent & Inset)

Toggle Positions

Video Outputs

Dwell Adjust

Dwell Time

Power

Power Supply

Camera Position LED indicators (8) RED

Connectors:

Video In/Out

1VP-P 75 ohm terminated; toggle switch selectable
BYpass, Sequence & Home

1VP-P ohms terminated or unterminated
Front panel recessed pot
From approximately .2 seconds to 1 minute

5-12VDC

9-12VDC @ 100 mA

BNC

Power Input

Alarm Input

Mechanical:

Case

Weight

Box Size

DC Coax 2.1mm x 5.5mm

Screw terminal with quick disconnect

Beige Metal 5.13” W x 4.90” L x 1.38” H

1.20kg. (2.64lbs.)

9.0” W x 5.125” L x 1.5” H