AVE 4PSWT Specsheet

4 Position

Switcher

The 4PSWT is a four position alarming, homing, by passing sequential video switcher. One alarm input via a rear cage clamp connector allows homing to camerra 4 in a manual mode. Upon release of the alarm input, the switcher continues from where it left off prior to the alarm occurrence. Front panel LED indicators show which camera is currently being homed. The three position toggle switchers allow instant manual homing, camera by passing except upon alarm, and auto sequencing mode. There is a recessed Dwell pot on the front panel to adjust the dwell time from approximately 1 second to 30 seconds. The 4PSWT is powered by 9-12VDC and is supplied with a UL approved wall transformer.

Specifications

Video Inputs (Parent & Inset)

Toggle Positions

Video Outputs

Dwell Adjust

Dwell Time

Power

Power Supply

Camera Position LED indicators (4) RED

Connectors:

Video In/Out

Power Input

Alarm Input

Mechanical:

Case

Weight

Box Size

1VP-P 75 ohm terminated; toggle switch selectable BYpass, Sequence & Home

1VP-P ohms terminated or unterminated Front panel recessed pot From approximately .2 seconds to 1 minute

5-12VDC

9-12VDC @ 100 mA

BNC DC Coax 2.1mm x 5.5mm

Screw terminal with quick disconnect

Beige Metal 5.13” W x 4.90” L x 1.38” H

0.60kg. (1.32lbs.)

8.0” W x 7.0” L x 2.5” H