Avaya XT Deluxe User Manual
Avaya XT Deluxe Camera
Quick Setup Guide
Congratulations on purchasing your
PTZ Deluxe Camera for the Avaya IX
Video Conferencing XT Series. This
brings a high quality full HD video
source to your endpoint, with HD 1080p
60 frames per second (fps), including
12x Optical Zoom, 4x Digital zoom
(total 48x), and an optimal horizontal
field of view for video conferencing
rooms.
Package Content:
• Avaya XT Deluxe Camera
• First camera cable: 2.5m triple
camera cable, including power,
VISCA and DVI-D/HDMI
Setting Up this Device
Avaya XT Deluxe Camera can be used as first camera on Avaya XT5000
Series, XT7000 Series, XT4000 Series and XT Executive 240, or as additional
camera on XT5000 and XT7000. Please follow the below instructions to
connect and use XT Deluxe Camera.
2. Use Deluxe Camera as additional camera1. Use Deluxe Camera as main camera
Step 1
Insert the three connectors to their sockets at rear of the
camera:
• The DVI connector to the DVI socket.
• The 8-pin connector to the Camera Ctrl IN socket.
Step 1
Connect the Deluxe Camera to the XT5000 Codec Unit’s
DVI input (instead of connecting a PC), or to the second
HDMI input of XT7100.
Step 2
• The power connector to the DC IN 12V socket.
Step 2
Attach the two connectors to the camera sockets at
the rear of the XT Series endpoint (XT4000, XT5000,
XT7000 or XT Executive 240):
• The HDMI connector to the vertical socket
• The connector for power and serial control to the
horizontal socket.
Step 3
Check that HD1 camera is enabled in the menu
Configure>Advanced>I/O connections>Camera>HD1
Connect the VISCA control cross cable between the
Camera Ctrl Out of first camera
with Camera Ctrl In of second camera.
Step 3
Connect the power supply of the optional camera to the
mains, then switch on the Codec Unit.
Step 4
Configure the optional camera in the GUI section
“IO connections –> cameras” as explained in the
Administrator guide.
To control the optional camera from your XT Series
endpoint, you need to connect a VISCA cable between
the two cascaded cameras.
CAUTION: the mains
cable is used as a
disconnecting device,
use therefore an easily
accessible outlet
located near the
device for the power
supply connection.
Never remove the
mains plug while the
device is connected.
VISCA Cable
VISCA Control is a standard protocol to control
VISCA Cable
PTZ Cameras.
You may buy a VISCA cross cable from a third party or
make you own cable if you’re planning to position the
optional camera far away from the Codec Unit.
The VISCA cross cable is an 8-pin mini-DIN male to mini-DIN
male cable with below Pinout diagram
Help
XT5000 Series Codec Unit
CAUTION: the mains
cable is used as a
disconnecting device,
use therefore an easily
accessible outlet
located near the
device for the power
supply connection.
Never remove the
mains plug while the
device is connected.
VISCA - IN
1 One
2 Two
3 Three
4 Four
5 Five
6 Six
7 Seven
8 Eight
SHIELD
CAUTION: Make sure all units are
switched off whenever connecting
or disconnecting devices.
VISCA - OUT
2 Two
1 One
5 Five
4 Four
3 Three
6 Six
7 Seven
8 Eight
SHIELD
NOTES:
VISCA Cable
Starting from XT firmware version 9, cascading with VISCA daisychain of mixed camera models (such as Premium and Deluxe) is
supported. Please refer to XT v9 Release Notes and Deployment
Guide for further information.
If the Deluxe camera is not controlled through the VISCA serial
control, it can be controlled using the XT Remote Control, selecting
the IDs 97 / 98 / 99.
Power supply, VISCA cross cable, and HDMI to DVI used to connect
the optional camera are provided with Camera Cable kit, to be
purchased separately (not included in the XT Deluxe Camera box).
XT7000 Series Codec Unit
The dip switches 1 and 2 at the bottom of the camera
should be set to reflect the selected XT Remote Control ID.
ID97=DIP1 OFF and DIP2 OFF (default). ID98= DIP1 ON
ON
1 2 3 4
and DIP2 OFF. ID99 = DIP1 OFF and DIP2 ON.
DIP1 - DIP2: To select IR ID 97,98,99
1/4-20UNC
© 2016 Avaya Inc. All Rights Reserved.
Avaya and the Avaya logo are trademarks of Avaya Inc. and are registered in the United States and other countries. All other trademarks identified
by ®, TM, or SM are registered marks, trademarks, and service marks,
respectively, of Avaya Inc. 06/16 • 700512610_QSG_XT_Deluxe_Cmaera
05
ON
1 2 3 4
P/N 700512610 A02
P/N 700512610 B01
Loading...