Avaya WLAN AP 8120-O Regulatory Information

Avaya WLAN 8100 Regulatory Information
— WLAN AP 8120-O

1.2.0.0

NN47251-110, 01.03AC (Part number 700503113, 01.03AC)

February 2012

©

2012 Avaya Inc.

All Rights Reserved.

Notice

While reasonable efforts have been made to ensure that the
information in this document is complete and accurate at the time of
printing, A
right to make changes and corrections to the information in this
document without the obligation to notify any person or organization of
such changes.

Documentation disclaimer

“Documentation” means information published by Avaya in varying
mediums which may include product information, operating instructions
and performance specifications that Avaya generally makes available
to users of its products. Documentation does not include marketing
materials. Avaya shall not be responsible for any modifications,
additions, or deletions to the original published version of
documentation unless such modifications, additions, or deletions were
performed by Avaya. End User agrees to indemnify and hold harmless
Avaya, Avaya's agents, servants and employees against all claims,
lawsuits, demands and judgments arising out of, or in connection with,
subsequent modifications, additions or deletions to this documentation,
to the extent made by End User.

Link disclaimer

Avaya is not responsible for the contents or reliability of any linked Web
sites referenced within this site or documentation provided by Avaya.
Avaya is not responsible for the accuracy of any information, statement
or content provided on these sites and does not necessarily endorse
the products, services, or information described or offered within them.
Avaya does not guarantee that these links will work all the time and has
no control over the availability of the linked pages.

Warranty

Avaya provides a limited warranty on its Hardware and Software
(“Product(s)”). Refer to your sales agreement to establish the terms of
the limited warranty. In addition, Avaya’s standard warranty language,
as well as information regarding support for this Product while under
warranty is available to Avaya customers and other parties through the
Avaya Support Web site:
you acquired the Product(s) from an authorized Avaya reseller outside
of the United States and Canada, the warranty is provided to you by
said A

Licenses

THE SOFTWARE LICENSE TERMS AVAILABLE ON THE AVAYA
WEBSITE,
APPLICABLE TO ANYONE WHO DOWNLOADS, USES AND/OR
INST
ANY AVAYA AFFILIATE, OR AN AUTHORIZED AVAYA RESELLER
(AS APPLICABLE) UNDER A COMMERCIAL AGREEMENT WITH
AVAYA OR AN AUTHORIZED AVAYA RESELLER. UNLESS
OTHERWISE AGREED TO BY AVAYA IN WRITING, AVAYA DOES
NOT EXTEND THIS LICENSE IF THE SOFTWARE WAS OBTAINED
FROM ANYONE OTHER THAN AVAYA, AN AVAYA AFFILIATE OR AN
AVAYA AUTHORIZED RESELLER; AVAYA RESERVES THE RIGHT
TO TAKE LEGAL ACTION AGAINST YOU AND ANYONE ELSE
USING OR SELLING THE SOFTWARE WITHOUT A LICENSE. BY
INSTALLING, DOWNLOADING OR USING THE SOFTWARE, OR
AUTHORIZING OTHERS TO DO SO, YOU, ON BEHALF OF
YOURSELF AND THE ENTITY FOR WHOM YOU ARE INSTALLING,
DOWNLOADING OR USING THE SOFTWARE (HEREINAFTER
REFERRED TO INTERCHANGEABLY AS “YOU” AND “END USER”),
AGREE TO THESE TERMS AND CONDITIONS AND CREATE A
BINDING CONTRACT BETWEEN YOU AND AVAYA INC. OR THE
APPLICABLE AVAYA AFFILIATE ( “AVAYA”).

vaya assumes no liability for any errors. Avaya reserves the

http://support.avaya.com. Please note that if

vaya reseller and not by Avaya.

HTTP://SUPPORT.AVAYA.COM/LICENSEINFO/ ARE

ALLS AVAYA SOFTWARE, PURCHASED FROM AVAYA INC.,

Copyright

Except where expressly stated otherwise, no use should be made of
materials on this site, the Documentation, Software, or Hardware
provided by Avaya. All content on this site, the documentation and the
Product provided by
design of the content is owned either by Avaya or its licensors and is
protected by copyright and other intellectual property laws including the
sui generis rights relating to the protection of databases. You may not
modify, copy, reproduce, republish, upload, post, transmit or distribute
in any way any content, in whole or in part, including any code and
software unless expressly authorized by Avaya. Unauthorized
reproduction, transmission, dissemination, storage, and or use without
the express written consent of Avaya can be a criminal, as well as a
civil offense under the applicable law.

Third-party components

Certain software programs or portions thereof included in the Product
may contain software distributed under third party agreements (“Third
Party Components”), which may contain terms that expand or limit
rights to use certain portions of the Product (“Third Party Terms”).
Information regarding distributed Linux OS source code (for those
Products that have distributed the Linux OS source code), and
identifying the copyright holders of the Third Party Components and the
Third Party Terms that apply to them is available on the Avaya Support
Web site:

Trademarks

The trademarks, logos and service marks (“Marks”) displayed in this
site, the Documentation and Product(s) provided by Avaya are the
registered or unregistered Marks of
parties. Users are not permitted to use such Marks without prior written
consent from Avaya or such third party which may own the Mark.
Nothing contained in this site, the Documentation and Product(s)
should be construed as granting, by implication, estoppel, or otherwise,
any license or right in and to the Marks without the express written
permission of Avaya or the applicable third party.

Avaya is a registered trademark of Avaya Inc.

All non-Avaya trademarks are the property of their respective owners,
and “Linux” is a registered trademark of Linus Torvalds.

Downloading Documentation

For the most current versions of Documentation, see the Avaya
Support Web site:

Contact Avaya Support

Avaya provides a telephone number for you to use to report problems
or to ask questions about your Product.
is 1-800-242-2121 in the United States. For additional support
telephone numbers, see the Avaya Web site:

http://support.avaya.com/Copyright.

Avaya including the selection, arrangement and

Avaya, its affiliates, or other third

http://support.avaya.com.

The support telephone number

http://support.avaya.com.

2 Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012

Comments? [e-mail]

Contents

Chapter 1: Regulatory Compliance Statements...............................................................

Federal Communications Commission (FCC) Compliance Notices..........................................................

Class B Interference Statement................................................................................................................

FCC Caution.............................................................................................................................................

RF Radiation Exposure and Hazard Statement........................................................................................

Non-Modification Statement......................................................................................................................

Deployment Statement..............................................................................................................................

Outdoor operating restrictions...................................................................................................................

Dynamic Frequency Selection (DFS) in the 5.0 GHz UNII bands.............................................................

Canadian IC Statements...........................................................................................................................

European Union and European Free Trade Association (EFTA) Regulatory Compliance........................

Declaration of Conformity..........................................................................................................................

European Community Declaration of Conformity......................................................................................

Countries of Operation and Restrictions of Use in the European Community..........................................

Operation Using the 2.400 to 2.4835 GHz Channels in the European Community..................................

Operation Using the 5.15 to 5.25 GHz, 5.25 to 5.35 GHz, and 5.470 to 5.725 GHz Channels in the

European Community...............................................................................................................................

Russia, Belarus, and Kazakhstan Requirement.......................................................................................

Antenna Statement...................................................................................................................................

Chapter 2: Devices with detachable antennas.................................................................

Chapter 3: English..............................................................................................................

Introduction...............................................................................................................................................

Safety Precautions....................................................................................................................................

Installing the WLAN AP 8120-O................................................................................................................

Hardware..........................................................................................................................................

Cable requirements..........................................................................................................................

Waterproofing the Ethernet UTP cable.............................................................................................

Installing the WLAN AP 8120-O on a vertical pole...........................................................................

Mounting the WLAN AP 8120-O on a horizontal pole......................................................................

Installing the WLAN AP 8120-O on a wall........................................................................................

Installing the Ethernet surge arrester...............................................................................................

Installing the Power over Ethernet injector.......................................................................................

Safety Messages.......................................................................................................................................

Kapitel 4: Deutsch...............................................................................................................

Einführung.................................................................................................................................................

Sicherheitsmaßnahmen............................................................................................................................

Installation des WLAN-AP 8120-O............................................................................................................

Hardware..........................................................................................................................................

Kabelanschlüsse..............................................................................................................................

Abdichten des Ethernet-UTP-Kabels...............................................................................................

Mounten eines WLAN-AP 8120-O an einem vertikalen Mast..........................................................

Mounten eines WLAN-AP 8120-O an einem horizontalen Mast......................................................

Mounten eines WLAN-AP 8120-O an einer Wand...........................................................................

Installation des Ethernet-Überspannungsableiters...........................................................................

5
5
5
6
6
6
6
7
9
9
10
10
11
13
14

14
15
15

17
19

19
20
21
22
22
23
25
30
34
39
43
47

49
49
50
52
52
52
54
56
59
63
66

Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012 3

Installation des Power over Ethernet-Injektors.................................................................................

Sicherheitshinweise..................................................................................................................................

Capítulo 5: Español.............................................................................................................

Introducción...............................................................................................................................................

Precauciones de seguridad......................................................................................................................

Instalación del WLAN AP 8120-O.............................................................................................................

Hardware..........................................................................................................................................

Requisitos de cableado....................................................................................................................

Impermeabilización del cable UTP Ethernet....................................................................................

Instalación del WLAN AP 8120-O en un poste vertical....................................................................

Montaje del WLAN AP 8120-O en un poste horizontal....................................................................

Instalación del WLAN AP 8120-O en una pared..............................................................................

Instalación del disipador de sobretensiones Ethernet......................................................................

Instalación del inyector Power over Ethernet...................................................................................

Advertencias de seguridad.......................................................................................................................

Chapitre 6 : Français...........................................................................................................

Introduction...............................................................................................................................................

Précautions de sécurité.............................................................................................................................

Installation de l'AP 8120-O WLAN............................................................................................................

Matériel.............................................................................................................................................

Configuration requise pour les câbles..............................................................................................

Hydrofugation du câble Ethernet UTP..............................................................................................

Installation de l'AP 8120-O WLAN sur un tuyau vertical..................................................................

Installation de l'AP 8120-O WLAN sur un tuyau horizontal..............................................................

Fixation de l'AP 8120-O WLAN au mur............................................................................................

Installation d'un parasurtenseur Ethernet.........................................................................................

Installation de l'injecteur PoE...........................................................................................................

Messages de sécurité...............................................................................................................................

Capítulo 7: Português do Brasil........................................................................................

Introdução.................................................................................................................................................

Precauções de segurança........................................................................................................................

Instalação do WLAN AP 8120-O..............................................................................................................

Ferragens.........................................................................................................................................

Requisitos de cabo...........................................................................................................................

Impermeabilização do cabo Ethernet UTP.......................................................................................

Instalação do WLAN AP 8120-O em um polo vertical......................................................................

Montagem do WLAN AP 8120-O em um polo horizontal.................................................................

Instalação do WLAN AP 8120-O em uma parede............................................................................

Instalação do para-raios Ethernet....................................................................................................

Instalação do injetor PoE (Power over Ethernet).............................................................................

Avisos de segurança.................................................................................................................................

70
74

77
77
78
80
80
80
81
84
87
90
94
98
102

105
105
106
108
108
108
109
112
115
118
122
126
130

133
133
134
135
136
136
137
139
142
145
149
153
157

4 Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012

Chapter 1: Regulatory Compliance

Statements

The Avaya WLAN 8100 product line consists of the following AP models:

•

WLAN AP 8120 (indoor AP)

• WLAN AP 8120 with external antenna (indoor AP)

• WLAN AP 8120-O (outdoor AP)

This document contains regulatory compliance statements only for the WLAN AP 8120-O.

Federal Communications Commission (FCC) Compliance
Notices

This section includes the following FCC statements for the WLAN AP 8120-O:

• FCC ID

• Class B Interference Statement
RF Radiation Exposure and Hazard Warning

•

• Non-Modification Statement

• Deployment Statement

Class B Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses,

and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning

Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012 5

Regulatory Compliance Statements

the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different
is connected.

• Consult the dealer or an experienced radio/TV technician for help.

from that to which the receiver

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

RF Radiation Exposure and Hazard Statement

To ensure compliance with FCC RF exposure requirements, this device must be installed in a
location such that the antenna of the device will be greater than 25 cm (9.9 in.) away from all
persons. Using higher gain antennas and types of antennas not covered under the FCC
certification of this product is not allowed. Installers of the radio and end users of the product
must adhere to the installation instructions provided in this manual.

This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

Non-Modification Statement

Use only the supplied external antenna. Unauthorized antennas, modifications, or attachments
could damage the WLAN AP 8120-O and violate FCC regulations. Any changes or
modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.

Deployment Statement

This product is certified for outdoor deployment.

6 Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012

Comments? [e-mail]

Outdoor operating restrictions

The following section describes the outdoor operating restrictions for the 8120-0 access
point.

United States and Canada

2.4 GHz Band

IEEE 802.11b/g operation in the 2.400 to 2.4835 GHz ISM band is governed by FCC Part 15,
Subparts B & C in the US and IC RSS-210 in Canada. These rules state that the parameters
for both indoor and outdoor operation in this frequency band are identical.

5.0 GHz Bands

Outdoor operating restrictions

IEEE 802.1

1a operation in the following frequency bands, is governed by FCC Part 15,
Subparts B & C and FCC Part 15, Subpart E for the US and IC RSS-210, Issue 6 in Canada.
There are restrictions of use in the 5.0 GHz frequency bands and they are outlined below:

Table 1: Restrictions of use in 5.0 GHz frequency bands

5150 to 5250 MHz: Operation is restricted to INDOOR use ONLY (FCC Part 15.400 & IC

RSS-210)

5250 to 5350 MHz: Operation can be used indoors or outdoors (FCC Part 15.400 & IC

RSS-210)

5470 to 5725 MHz: Operation can be used indoors or outdoors (FCC Part 15.400 & IC

RSS-210)

5725 to 5825 MHz: Operation can be used indoors or outdoors (FCC Part 15.400 & IC

RSS-210)

5725 to 5875 MHz: Operation can be used indoors or outdoors (FCC Part 15.247)

The software settings that govern the operating parameters of the 8120-O access point have
been constructed to prohibit operation in the 5150 to 5250 MHz band when either "outdoor"
mode or an "outdoor antenna configuration" is selected.

In addition, the 8120-O Access Point has been prohibited, via software, from operating in the
5250 to 5350 MHz and 5470 to 5725 MHz frequency bands because it cannot meet the DFS
requirements as outlined in the rules of the FCC for Part 15, Subpart E that come into force
on July 20, 2007.

European Union (EU) and European Fair Trade Association (EFTA)

2.4 GHz Band

IEEE 802.11b/g operation in the 2400 to 2483.5 MHz WLAN band is governed by ETSI EN
300-328 v1.7.1. These rules state that the parameters for both indoor and outdoor operation
in this frequency band are identical in all member states, except those listed below:

Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012 7

Regulatory Compliance Statements

Table 2: Excepted member states

France: Operation outdoors for IEEE 802.11b/g is limited to 2400 to 2454 MHz,

channels 1 through 7, at a maximum EIRP of 100 mW. The 8120-O access
point is disabled from operating on Channels 8 through 13 when either
"outdoor" mode or an "outdoor antenna configuration" is selected.

Italy: Operation outdoors for IEEE 802.1

license. If the 8120-O is to be used beyond the boundaries of the owner's
property, a general authorization is required from the Ministry of
Communications. Please check http://www.comunicazioni.it/it for further
details. Operation on all channels has been prohibited when either "outdoor"
mode or an "outdoor antenna configuration" is selected.

Latvia: Operation outdoors for IEEE 802.11b/g is prohibited without obtaining a

license. If the 8120-O is to be used beyond the boundaries of the owner's
property, outdoors or with an outdoor antenna, a general authorization is first
required from the Electronic Communications Office. Please check http://
www.esd.lv for further details. Operation on all channels has been prohibited
when either "outdoor" mode or an "outdoor antenna configuration" is
selected.

1b/g is prohibited without obtaining a

5.0 GHz Bands

IEEE 802.11a operation in the frequency bands listed below, are governed by ETSI EN
301-893v 1.4.1 and the R & TTE Directive 1999/5/EC. Effective July 1, 2008, EN 301-893
v1.4.1

was updated to require compliance with 0.8 μsecond pulse widths and staggered PRF’s
in the 5470 – 5725 MHz band. The 8120-O access point meets compliance with these new
mandates by disabling operation, via software, on channels 120, 124, 128 and 132 in the 5600
to 5650 MHz frequency band because it cannot meet the 0.8 μsecond pulse width and
staggered PRF DFS requirements as outlined in the updated EN 301-893v1.4.1 standard.

Table 3: Restrictions of use in 5.0 GHz frequency bands

5150 to 5250 MHz: Operation is restricted to INDOOR use ONLY

5250 to 5350 MHz: Operation is restricted to INDOOR use ONLY

5470 to 5725 MHz: Operation can be used indoors or outdoors per EN 301-893893

v1.4.1

5725 to 5850 MHz: Operation currently NOT ALLOWED or supported in the 8120-O

Access Point.

Operating parameters for both indoor and outdoor operation in the frequency bands listed
above are identical in all member states, except those listed below:

Table 4: Excepted Member States

France: No operation is permitted in either the 5.25 to 5.35 GHz or 5.470 to 5.725 GHz

because the device is noncompliant with the DFS requirements stated

bands

8 Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012

Comments? [e-mail]

Dynamic Frequency Selection (DFS) in the 5.0 GHz UNII bands

in EN 301-893 v1.3.1. Therefore, no outdoor operation is supported in France
for the 8120-O access point.

Italy: Operation outdoors for IEEE 802.11a is prohibited without obtaining a license.

If the 8120-O is to be used beyond the boundaries of the owner's property, a
general authorization is required from the Ministry of communications. Please
check http://www.comunicazioni.it/it for further details. Operation on all
channels has been prohibited when either "outdoor" mode or an "outdoor
antenna configuration" is selected.

External Antenna Statement

Intentional radiators, such as the Avaya WLAN 8120-O access point are not intended to be
operated with any antenna(s) other than those furnished by A
only be operated with the antenna(s) with which it is authorized. For a complete listing of the
authorized antennas for use with this product, visit

http://www.avaya.com/support

In order to ensure continued compliance, use of an antenna not on the Avaya approved
antenna list is not allowed without specific authorization from Avaya. Use of an antenna not
specifically authorized by Avaya may not comply with local regulatory requirements with
respect to radiated emission limits and may result in illegal operation of the product. The
installer of the wireless system and associated antenna is required to ensure that only those
antennas on the Avaya approved antenna list or those antennas specifically approved by
Avaya on a case by case basis are deployed with the intentional radiator. Be sure to associate
the appropriate antenna model number and localized regulatory region when selecting the
Avaya authorized antenna(s).

vaya. An intentional radiator may

Dynamic Frequency Selection (DFS) in the 5.0 GHz UNII
bands

The WLAN AP 8120-O access point has been prohibited, via software, from operating in the
5250 to 5350 MHz and 5470 to 5725 MHz frequency bands for the US and Canada because
it does not meet
E that came into force on July 20, 2007.

the DFS requirements as outlined in the rules of the FCC for Part 15, Subpart

Canadian IC Statements

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired
operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil

Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012 9

Regulatory Compliance Statements

ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.

Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour
une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes
de satellites mobiles utilisant les mêmes canaux.

Be advised that high-power radars are allocated as primary users (i.e. priority users) of the
bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference
and/or damage to LE-LAN devices.

Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d.,
qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars
pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

European Union and European Free Trade Association
(EFTA) Regulatory Compliance

This equipment may be operated in the countries that comprise the member countries of the
European Union and the European Free Trade Association.
following paragraph, are referred to as The European Community throughout this document:

AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA,
FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA,
LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA,
SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN,
NORWAY, SWITZERLAND.

The WLAN AP 8120-O access point communicates with an Avaya WLAN 8100 Wireless
Controller using a standard CAT-5 (Category 5) or higher 1000 Mbps twisted pair Ethernet
cable to provide wireless local area networking (WLAN) capabilities. The WLAN AP 8120-O
access point includes two 802.11a+n, b/g+n radios.

These countries, listed in the

Declaration of Conformity

Marking by this symbol

indicates compliance with the Essential Requirements of the R&TTE Directive of the European
Union (1999/5/EC). This equipment meets the following conformance standards:

10 Avaya WLAN 8100 Regulatory Information — WLAN AP

8120-O February 2012

Comments? [e-mail]

European Community Declaration of Conformity

Safety: EN 60950-1:2001 + A11:2004

EMC: EN 55022:2006, EN 55024:1998 + A1:2001 + A2:2003, EN 301-489-1 v1.6.1, EN
301-489-17 v1.2.1, CISPR22:2005, CISPR24

Including: EN 61000-3-2, -3-3, -4-2, -4-3, -4-4, -4-5, -4-6 and -4-11.

The product is also licensed
as required for additional country specific standards as required for the International
Marketplace.

Radio: EN 300-328 v.1.7.1 (2006-10) & EN 301-893 v.1.5.1 (2008-12)

DEVIATION: The WLAN AP 8120-O access point was tested to and are compliant with all of
the technical specifications of EN 301-893 v1.5.1 for operation in the 5.0 GHz bands, except
the DFS requirements in the 5600 – 5650 MHz band.

IEEE 802.11a operation in the 5250 to 5350 MHz and 5470 to 5725 MHz frequency bands is
governed by ETSI EN 301-893 v1.5.1 and the R&TTE Directive 1999/5/EC. Effective July 1,
2008, EN 301-893 v1.5.1 was updated to require compliance with 0.8 μsecond pulse widths
and staggered PRF’s in the 5470 – 5725 MHz band. The WLAN AP 8120-O access point meets
compliance with these new mandates by disabling operation, via software, on channels 120,
124, 128 and 132 in the 5600 to 5650 MHz frequency band because it cannot meet the 0.8
μsecond pulse width and staggered PRF DFS requirements as outlined in the updated EN
301-893 v1.5.1 standard.

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission
systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide
band modulation techniques and Broadband Radio Access Networks (BRAN); 5 GHz high
performance RLAN. Certifications are harmonized to the EN standards covering essential
requirements under article 3.2 of the R&TTE Directive.

SAR: EN 50385:2002

European Community Declaration of Conformity

WLAN Radio Model, AP 8120-O, as stated in the following Declarations of Conformity

AP

represents all models in the WLAN

Bulgaria български

С това, avayal обяв
AP 8120-O, е със съгласие с съществените изисквания и други важни
условия на директива 1999/5 на европейски съюз

Czech
Republic

Denmark Dansk

Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012 11

Èesky
Avaya tímto prohlašuje, že tento WLAN Rádio Model, AP 8120-O, je ve shodì
se základními požadavky a dalšími pøíslušnými ustanoveními smìrnice
1999/5/ES.

ява, че този модел на радио на WLAN Радио Модел

8120-O listed above.

,

Regulatory Compliance Statements

Undertegnede Avayaerklærer herved, at følgende udstyr WLAN Radio Model,
AP 8120-O, overholder de væsentlige krav og øvrige relevante krav i direktiv
1999/5/EF.

English English

Hereby,
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.

Estonia Eesti

Käesolevaga kinnitab Avayaseadme WLAN Radio Model, AP 8120-O,
vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.

Finland Suomi

Avayavakuuttaa täten että WLAN Radio Esikuvallinen, AP
laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.

France Français

Par la présente Avaya déclare que l'appareil Model Par radio, AP 8120-O de
WLAN, est conforme aux exigencies essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE.

Avaya declares that this WLAN Radio Model, AP 8120-O , is in

8120-O, tyyppinen

Germany Deutsch

Hiermit erklärt Avaya., dass sich das Gerät WLAN Radiomodell, AP 8120-O,
in Übereinstimmung mit den grundlegenden
einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Greece ΕΛΛΗΝΙΚΗ

Hungary Magyar

Alulírott, Avayanyilatkozom, hogy a WLAN Rádió Minta, AP 8120-O, megfelel
a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb
elõírásainak.

Italy Italiano

Con la presente Avayadichiara che questo Modello Radiofonico WLAN, AP
8120-O di WLAN, è conforme ai requisiti essenziali ed alle alter disposizioni
pertinenti stabilite dalla direttiva 1999/5/CE.

Latvia Latviski

Ar šo Avayadeklarç, ka WLAN Radio Model, AP 8120-O, atbilst Direktîvas
1999/5/EK bûtiskajâm prasîbâm un citiem ar to saistîtajiem noteikumiem.

Lithuania Lietuviø

Šiuo Avayadeklaruoja, kad šis WLAN Radio Model, AP 8120-O, atitinka
esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.

Anforderungen und den übrigen

Malta Malti

12 Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012

Comments? [e-mail]

Hawnhekk, Avaya., jiddikjara li dan WLAN Radio, Model AP 8120-O,
jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm
fid-Dirrettiva 1999/5/EC.

NetherlandsNetherlands

Hierbij verklaart Avayadat het toestel WLAN Radiomodel, AP 8120-O, in
overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.

Countries of Operation and Restrictions of Use in the European Community

Poland

Portugal Português

Romania Român

Slovakia Slovensky

Slovenia Slovensko

Spain Español

Polski
Niniejszym Avayaooewiadcza, ¿e WLAN Radio Model, AP 8120-O, jest
zgodny z zasadniczymi wymogami oraz pozosta³ymi stosownymi
postanowieniami Dyrektywy 1999/5/EC.

Avaya declara que este Modelo De rádio WLAN, AP
com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.

Astfel, Avaya declarã acel acest WLAN Radio Model, AP 8120-O, este în
conformitate
1999 5 EC.

Avaya týmto vyhlasuje, že WLAN Radio Model,AP 8120-O spåòa základné
požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.

izjavlja, da je ta WLAN Radio Model, AP 8120-O, v skladu z bistvenimi

Avaya
zahtevami in ostalimi relevantnimi doloèili directive 1999/5/ES.

Por medio de la presente Avaya declara que el Modelo De radio, AP 8120-O
de WLAN, cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

8120-O , está conforme

cu cerinþele necesare ºi proviziile alte semnificative de Directive

Sweden Svenska

Härmed intygar Avaya elatt denna WLAN Radiotelegrafera till Modell, AP
8120-O, står I överensstämmelse med de väsentliga egenskapskrav och
övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Countries of Operation and Restrictions of Use in the
European Community

Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012 13

Regulatory Compliance Statements

Operation Using the 2.400 to 2.4835 GHz Channels in the
European Community

The professional installer should use the configuration utility provided with this product to verify
the current channel of operation, the expected transmit power level, and to confirm that the
device is operating in conformance with the spectrum usage rules for the selected European
Community country. If operation is occurring outside of the allowable channels as indicated in

guide, then operation of the product must cease immediately and the installer must consult

this
with the local technical support staff responsible for the wireless network.

This device is intended to be operated in all countries of the European Community. Additional
restrictions of use for the WLAN AP 8120-O within the European Community countries in the

2.400 to 2.4835 GHz band are listed below.

• The frequencies associated with channels 1 to 13 in the 2.400 to 2.4835 GHz band are
allowed to be used either indoors or outdoors in all countries of the European Community,
except where noted below.

• In France, the following operation is permitted:

- Indoor operation is permitted in the 2.400 to 2.4835 GHz band on channels 1 to 13 at
a maximum EIRP of 100 mW (20 dBm).

The WLAN AP 8120-O is guaranteed to meet this limit by automatically adjusting the transmit
power level through the operating software.

Operation Using the 5.15 to 5.25 GHz, 5.25 to 5.35 GHz, and

5.470 to 5.725 GHz Channels in the European Community

T

o remain in conformance with European National spectrum usage laws, follow the channel
limitations associated with the 5 GHz bands as specified in this document.
installer should verify the current channel of operation and the expected transmit power level
of the WLAN AP 8120-O to confirm that the device is operating in conformance with the
spectrum usage rules for the European Community country where the unit is being installed.
If operation is occurring outside of the allowable frequencies or above the power levels, as
indicated
must consult with the local technical support staff responsible for the wireless network.

This device is intended to be operated in all countries of the European Community. Additional
restrictions of use for the WLAN AP 8120-O within the European Community countries in the

5.15 to 5.25 GHz, 5.25 to 5.35 GHz, and 5.470 to 5.725 GHz bands are listed below.

in this guide, then operation of the product must cease immediately and the installer

The professional

• This device is restricted to indoor use only when operated in the European Community using
the 5.15-5.25 GHz and 5.25-5.35 GHz bands, which includes channels 36, 40, 44, 48, 52,

14 Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012

Comments? [e-mail]

Russia, Belarus, and Kazakhstan Requirement

56, 60 & 64. • The 5 GHz Turbo Mode feature is not allowed for operation in any European
Community country.

Russia, Belarus, and Kazakhstan Requirement

In order to comply with existing laws, Avaya's products that are supplied to Russia, Belarus,
and Kazakhstan are supplied with a configuration which is in line with existing legislation.
Modifications may lead to product certifications becoming invalid. Any modification of
preinstalled software and firmware, including installation of other or more current firmware or
software, therefore is done at the responsibility of the person or company executing the
changes. Avaya is not responsible
the territory of Russia, Belarus and Kazakhstan other than modifications executed and certified
by Avaya itself.

for any modifications to the product made on or for use on

Antenna Statement

Intentional radiators, such as the WLAN AP 8120-O, are not intended to be operated with any
antenna(s) other than those furnished by
with the antenna(s) with which it is authorized.

Use of an antenna not specifically authorized by Avaya may not comply with local regulatory
requirements with respect to radiated emission limits and may result in illegal operation of the
product. The installer of the wireless system and associated antenna is required to ensure that
only those antennas specifically approved by Avaya are deployed with the intentional
radiator.

Be sure to associate the appropriate antenna model number and localized regulatory region
when selecting the Avaya authorized antenna(s).

Avaya. An intentional radiator may only be operated

Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012 15

Regulatory Compliance Statements

16 Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012

Comments? [e-mail]

Chapter 2: Devices with detachable

antennas

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec
une antenne d'un type
Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut
choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne
dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.

This radio transmitter WLAN AP 8120-O has been approved by Industry Canada to operate with the
antenna types listed below with the maximum permissible gain and required antenna impedance for each
antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum
gain indicated for that type, are strictly prohibited for use with this device.

Le présent émetteur radio WLAN AP 8120-O a été approuvé par Industrie Canada pour fonctionner avec
les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise
pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur
au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.

et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.

The following lists describe the Avaya approved and optimized antenna types and modes for use with the
transmitter:

1. Master Wave:

Maximum permissible antenna gain: 7dBi

IEEE 802.11a/n (5GHz WLAN)

radio 1

Product code: 98618UNXX001

2. Master Wave:

Maximum permissible antenna gain: 7dBi

IEEE 802.11b/g/n (2.4GHz WLAN)

radio 2

Product code: 98618MNXX002

Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012 17

Devices with detachable antennas

18 Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012

Comments? [e-mail]

Chapter 3: English

About this task

Using the following procedures and information when installing the Avaya WLAN AP 8120-O.

Introduction

This section describes site conditions required before installing the WLAN AP 8120-O access
point.

Site Planning

Perform a visual inspection
Ensure that the site planning meets the following requirements before you begin the
installation:

• Identify the roof area, wall, or tower for mounting the WLAN AP 8120-O.

• Choose a site with a clear line-of-sight from the transmitting antenna.

• Determine the access area, such as a stairway or a ladder.

• Identify existing equipment installations and assess the condition of proposed towers or
mounting structures.

• Assess environmental conditions, such as temperature, ventilation, and humidity.

to determine and document the physical characteristics of the site.

Ethernet

The WLAN AP 8120-O must be closer than 100 meters from the Power over Ethernet (PoE).

Note:

Avaya recommends that you use outdoor CAT5E Ethernet cable for all external
connections.

Antenna

The WLAN AP 8120-O uses two 5.0 GHz and two 2.4 GHz antennas.

Caution:

Only use Avaya approved antennas with the WLAN AP 8120-O.
is outfitted with non-certified Avaya antennas is not supported under Avaya support
agreements.

A WLAN AP 8120-O that

Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012 19

English

Safety Precautions

This section describes powerline, installation, and surge protection safety precautions for the
WLAN AP 8120-O.

Warning:

Only qualified service personnel must perform installation. Read and follow all warning
notices and instructions marked on the product or included in the documentation.

Powerline

Warning:

Avaya warns that failure to comply with power and safety instructions could cause harm to
persons and equipment.

Ensure that the following precautions are implemented:

Warning:

Coming in contact with power lines can be lethal.

• Ensure that there are no accessible power lines near the installation site to avoid
accidental or incidental human contact with these lines.

• Ensure that antennas, masts, towers, guy wires or cables cannot come into contact
with these powerlines. T
these lines.

• You may get injured or killed if you are touching or holding any part of equipment when
it contacts electric power lines.

• Ensure there is NO possibility that equipment or personnel can come in contact directly
or indirectly with power lines.

• If anything, such as a wire or mast, does come in contact with a powerline, DO NOT
TOUCH IT OR ATTEMPT TO MOVE IT. Call the power company.

• Do not attempt to erect antennas or towers on windy days.

ry to plan for potential leaning or falling of this equipment into

Installation

Before installing the WLAN AP 8120-O on the mast ensure the following conditions are met
for the mast:

• The horizontal distance from a tower, mast or antenna to the nearest power line must be
at least twice the total length of the mast/antenna combination. This ensures that the mast
does not contact the power line if it falls either during installation or later.

• Make sure that all towers and masts are securely grounded. Securely grounded
equipment helps to prevent fire damage or human injury in case of lightning, static build­up, or short circuit.

Lightning surge protection

The Avaya-provided series indoor Ethernet surge arrester (lightning protector) provides high­level protection for the Ethernet and/or Power over Ethernet (POE) equipment located inside

20 Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012

Comments? [e-mail]

Installing the WLAN AP 8120-O

the building. In the event of a local strike, the Ethernet surge arrester instantaneously limits
sudden voltage surges across the cable.

Note:

The Avaya-provided series indoor Ethernet surge arrester is not rated for outdoor use. You
must only install the device indoors.

Warning:

You are required to have a rated surge protector for any cable exiting the building. The
required components must be rated and approved for use in the intended application.

Complete the following general safety guidelines when installing the Avaya Ethernet surge
arrester:

• Mount the Ethernet surge
building. The cables must exit the building through a customer-provided access, possibly
through the drilled hole where there are communications pipes.

• For best results, install the Ethernet surge arrester indoors in close proximity to a low­resistance ground at a point where the Ethernet cable exits the building.

• Install the Ethernet surge arrester in an indoor accessible location that allows for periodic
inspection. Provide drip loops in the cables to prevent water from entering the building.

• To connect the Ethernet surge arrester to ground, use the shortest and most direct run
possible with #8 solid copper wire (or equivalent).

Installing the Ethernet surge arrester on page 39 for specifications and installation

See,
instructions for the Ethernet surge arrester.

You can view
into French, German, Spanish, and Portuguese from the support portal at http://
www.avaya.com/support . You can also download the complete WLAN 8100 documentation
suite from this location.

©

2012 Avaya Inc.

, download, and print an expanded version of this document including translations

arrester indoors close to the Ethernet cable exit point from the

Installing the WLAN AP 8120-O

This section describes how to:

• mount the WLAN AP 8120-O on a vertical pole

• mount the WLAN

• mount the WLAN AP 8120-O on a wall

• install an Ethernet surge arrester

• waterproof an outdoor Ethernet cable end plug

• install a Power over Ethernet (PoE) injector

Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012 21

AP 8120-O on a horizontal pole

English

Hardware

The installation kit contains the following:

• 1 Avaya WLAN AP8120-O access point

•

1 Mounting kit:

- 1 plane bracket

- 2 brackets for base

- 2 hose straps – 2.5" and 5" diameter

- 4 bolts

- 4 roundhead

- 8 hexcap screws

• 1 Ethernet surge arrester

• 1 grommet for waterproofing the Ethernet connection on the access point

• 2 x 2.4 GHz antennas

• 2 x 5 GHz antennas

Equipment heat and cold loading requirements

The WLAN 8100 AP 8120-O must operate between -40 to +55℃.

Cable requirements

Before connecting the AP 8120-O with an Ethernet UTP
has been properly waterproofed for out door use. For instructions on how to waterproof the
Ethernet UTP cable, see

Warning:

You must use a certified outdoor UTP cable or risk injury from electrical shock.

Note:

Avaya recommends using only a certified outdoor UTP cable such as the Cat5E.

The AP 8120-O access point has one RJ-45 port that provides a 10/100/1000BASE-TX
Ethernet connection that is used to indirectly connect the access point to an A
WLAN controller, typically through an intermediate Layer 2 or Layer 3 network. When
connecting an outdoor access point, use a Category 5e (CAT-5e) cable with straight-through
signaling and standard RJ-45 connectors to connect to a network device.

cable you must ensure that the cable

Waterproofing the Ethernet UTP cable on page 23.

vaya WC 8180

22 Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012

Comments? [e-mail]

Installing the WLAN AP 8120-O

Avaya strongly recommends that you use an outdoor CAT-5E Ethernet cable for all external
connections.

The AP8120-O supports 802.3at (also known as PoE+). Avaya recommends that you use an
Avaya-provided PoE power injector when operating the AP8120-O. The access point receives
power and data through the RJ-45 port. Refer to Installing the Power over Ethernet injector on
page 43 for more information.

The Ethernet port on the access point cannot accept a cable that has an uneven sheath as
shown below. With an uneven
in the receptacle on the access point. Use a cable with an even sheath instead.

sheath, the RJ-45 connector on the cable will not seat properly

Figure 1: CAT-5 connector showing uneven sheath

Waterproofing the Ethernet UTP cable

Before connecting the outdoor Ethernet cable to the WLAN AP 8120-O you must first
waterproof the Ethernet UTP

o waterproof the Ethernet cable, complete the following procedure:

T

Note:

Avaya recommends using only an certified outdoor UTP cable such as a CAT-5E cable.

Procedure

1.

Unscrew the waterproof feed through cap and extract the grommet seal.

2. Slide the Ethernet UTP cable through the compression cap, the grommet seal, and
the Ethernet feed through body.

3. Strip the end of the Ethernet UTP cable to the length required for the 8P8C plug.

4. Insert the stripped end of the cable into the plug following either EIA/TIA 568A or
568B wiring as listed in the following table. Ensure that both ends of the cable have
the same pinout for the RJ45 connectors.

cable or risk an electrical shock.

5. Crimp the 8P8C connector to the cable.

Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012 23

English

6. Verify that the crimped cable has end-to-end continuity for all eight conductors and
plug shields.

7. Install the crimped plug into the external WLAN AP 8120-O Ethernet port found on
the bottom of the AP 8120-O.

8. Screw the waterproof feed through body to the external WLAN AP 8120-O Ethernet
port threads.

9. Slide the compression grommet into the body of the feed through.

10. Push the cable through the compression cap to the feed through body by hand to
tighten the seal.

Figure 2: Waterproofing the Ethernet plug

24 Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012

Comments? [e-mail]

Table 5: EIA/TIA wiring

EIA/TIA 568-A WIRING EIA/TIA 568-B WIRING

PIN 1– Green and white PIN 1– Orange and white

PIN 2– Solid green PIN 2– Solid orange

PIN 3– Orange and white PIN 3– Green and white

PIN 4– Solid blue PIN 4– Solid blue

PIN 5– Blue and white PIN 5— Blue and white

PIN 6– Solid orange PIN 6– Solid green

PIN 7– Brown and white PIN 7– Brown and white

PIN 8– Solid brown PIN 8– Solid brown

Installing the WLAN AP 8120-O on a vertical pole

Installing the WLAN AP

8120-O

About this task

Complete the following procedure to mount the WLAN AP 8120-O on a vertical pole.

Procedure

1. Place the lock and flat washers on the four hex cap screws.

Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012 25

English

Figure 3: Attaching the plane bracket to backcase

2. Drive the screws to attach the plane bracket to the back case.

3. Align the tab holes of the static brackets horizontally to the pole.

26 Avaya WLAN 8100 Regulatory Information — WLAN

AP 8120-O February 2012

Comments? [e-mail]

Installing the WLAN AP 8120-O

Figure 4: Attaching static bracket to plane bracket

4. Drive the four round head screws to attach the static bracket to the plane bracket.

5. Thread the open end of the hose strap through the two tabs on the static bracket.

Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012 27

English

Figure 5: Attaching hose strap to static bracket

6. Tighten the lock of the hose strap to secure the bracket to the pole.

Figure 6: Tightening the hose strap

7. Verify that the WLAN AP 81208-O is attached securely to the pole.

8. Insert

Avaya 5 GHz antennas as required into the connectors at the top of the WLAN

AP 8120-O. Tighten the antennas by hand.

9. Insert Avaya 2.4 GHz antennas as required into the connectors at the bottom of the
WLAN AP 8120-O Tighten the antennas by hand.

28 Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012

Comments? [e-mail]

Installing the WLAN AP 8120-O

Figure 7: AP 8120-O antenna connectors

10. The WLAN AP

8120-O is powered by a Power over Ethernet (PoE) device. Choose

one of the following options to connect an Ethernet surge arrester and PoE to the

AP

WLAN

8120-O.

Note:

If you are using the Avaya PoE injector,

you are not required to use the supplied
Ethernet surge arrester as the Avaya PoE injector has internal surge
protection.

a. To connect the supplied Ethernet surge arrester to the WLAN AP 8120-O, see

Installing the Ethernet surge arrester on page 39.

b. To connect the A

Power over Ethernet injector on page

Avaya WLAN 8100 Regulatory Information — WLAN AP 8120-O February 2012 29

vaya PoE injector to the WLAN AP 8120-O, see

43.

Installing the

English

Mounting the WLAN AP 8120-O on a horizontal pole

About this task

Complete the following procedure to mount the WLAN AP 8120-O on a horizontal pole.

Procedure

1. Place the lock and flat washers on the four hex cap screws.

Figure 8: Attaching the plane bracket to backcase

2. Drive the screws to attach the plane bracket to the back case.

3. Align the static brackets tab holes vertically to the pole.

30 Avaya WLAN 8100 Regulatory Information — WLAN

AP 8120-O February 2012

Comments? [e-mail]