
TransTalk
®
9000
Digital Wireless System
MDW 9040 Wireless
Pocket Phone
Quick Reference
503-801-191
Comcode 700060437
Issue 2, Feb. 2001
Mute
Volume
Control
Display
Softkeys/Column Buttons
Feature/
Program
(Exit for
9040 DCP
only)
Feat/P
Redial Menu
123
Conf
Trans
Hold
GHI
456
PQRS
7
*
ABC DEF
JKL MNO
TUV WXY Z
89
OPER
0
#
9040
Headset Jack
NOTE: For more details on any
information in this Quick
Reference, please refer to the MDW
9040 Installation and Use manual
(503-801-190).
1

Handset Registration
STEP 1: P ress the Handset
Registration activation button on
the Dual Radio Module
corresponding to the Line (1 or 2) to
which the handset will be
registered. The corresponding radio
module LED (Power LED for Line 1,
or Control LED for Line 2) will flash
to indicate that it is ready for
handset registration.
NOTE: There is a 5 minute time
limit to complete the registration.
STEP 2: A t the handset, press
Menu
and then press until
the arrow appears to the right of
Configuration, then press the
Softkey () below Sel.
STEP 3: A t the Configuration
menu, press until the arrow
appears to the right of
Registrati on, then press the
Softkey () below Sel.
STEP 4: For single zone operation,
move the arrow to Zone 1, then
press the Softkey () below
Reg to complete the regist ration.
STEP 5:
For dual zone operation,
repeat Steps 1 - 3, then register the
handset to the Zone 2 radio module.
NOTE:
the LED should stop flashing.
When registration is complete,
2

Handset Display Icons
The following icons may appear
on the top line of the handset
display.
These icons indicate the following:
Icon Indicates...
A message has been
left in voice mail.
Divided into four bars,
this icon shows the
Radio Frequency (RF)
signal strength.
Handset or headset is
off-hook (on).
This icon shows the
remaining battery life.
The vibrator has been
activated.
The alerter (ringer) is
turned on.
The handset
microphone has been
turned off by pressing
the Mute button on the
side of the handset.
There are more
options available on
the next display
screen.
3