Avaya Programmable Analog Interface User Manual

Business Communications Manager Programmable Analog Interface

All Business Communications Manager software has built-in market profiles. Some market profiles include analog parameters. Working with a licensed Nortel technician, you can customize the specified market profile analog parameters.

Customizing and localizing a market profile file is a two-step process that you complete with the assistance of a licensed Nortel technician:

1. work with the licensed Nortel technician, who can use a data entry tool to customize the analog parameters of the market profile file for you, and load it onto your BCM system to test

2. apply a permanent patch created by Nortel that can be applied to any BCM requiring the modified analog parameters

The programmable analog interface has a set-based administration interface that you access through a set that is on your BCM system. Administration telset interfaces are accessible only by a user with an Installer level of telset user privileges. Use the set-based administration interface to access the programmable analog interface status, and optionally remove the current analog profile file if it is determined that the installed analog profile file is inappropriate for your installation.

To use the programmable analog interface, you must first download and install the latest BCM patch on your BCM system.

Removing a profile file from a BCM

The set-based administration interface to the analog profile status can be used to access the profile file status and to optionally remove the profile. The profile should only be removed under guidance from Nortel Support (1-800-nortel support).

1.Call 1-800-nortel support to reach an authorized Nortel technician.

2.In the handset interface, press ** Option.

User ID:_

Information Sheet

CANCL BKSP OK

Password:_ CANCL BKSP OK

3.Log on by following the voice prompts or the display button options.

4.Enter your password and press OK.

5.Press Next to continue through the screens until you reach the Profile File screen. The Profile File screen appears. The Profile status is Y if a profile file exists. If the Profile status is N, then no profile file exists on the BCM system and no further action is required.

Profile File: Y DEL

6.Press DEL. The file is removed, and the Profile File status changes to N.

Profile File: N DEL

Alarms

If your system does not have an analog profile, no new alarms appear on your system. If your system has an analog profile, the following new alarms can appear.

Table 1 Programmable analog interface alarms

Alarm number Alarm text Action

382 Market profile does not match

analog profile base market profile

383 Profile is corrupt or invalid. You cannot use the profile file you selected. Delete or

The market profile you selected in the BCM does not match the market profile used as a base for the analog profile file. Either change the BCM market profile, or change (or delete) the profile file.

replace the profile file.

NN40010-677

www.nortel.com

Sourced in Canada

Document number: NN40010-677 01.01

Standard

December 2008