This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residen tial area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
Changes or modifications to this equipment not expressly approved by Avaya Inc.
could void the user’s authority to operate the equipment.
Conventions Used in the Documentation
Documentation for this product users the following conventions to convey
instructions and information:
CLI
•Mandatory keywords you type in are in the computer bold font.
•Information displayed on screen is displayed in computer font.
•Variables that you supply are in pointed brack et s <>.
•Optional keywords are in square brackets [].
•Alternative but mandatory keywords are grouped in braces {} and separated by
a vertical bar |.
•Lists of parameters from which you should choose are enclosed in square
brackets [ ] and separated by a vertical bar |.
•If you enter an alphanumeric string of two words or more, enclose the string in
inverted commas.
Avaya P332MF User’s GuideI
Notes, Cautions and Warnings
Note: Notes contain helpful information or hints or reference to material in other
documentation.
Caution: You should take care. You could do something that may dama ge
equipment or result in loss of data.
Warning: This m e ans danger. Failure to follow the instruction s or warnings may
result in bodily injury. You should ensure that you are qualified for this task and
have read and understood all the instructions
IIAvaya P332MF User’s Guide
Table of Contents
Preface .................................................................................................................. I
FCC Notice................................................ ...... ...... ............................................... I
Conventions Used in the Documentation....................................................... I
Table B.7MTBF for the Avaya P332MF in Various Configurations.. 158
Avaya P332MF User’s Guidexi
List of Tables
xiiAvaya P332MF User’s Guide
Chapter 1
Avaya P330 Overview
The Avaya P330 family of stackable Ethernet workgroup switches includes a range
of modules with 10/1 00/1000 M bps ports and a Layer 3 capabilit y/ATM Expansio n
Module. The Avaya P332MF switch has 12x100BaseFX MT-RJ ports and an
Expansion Module slot. The optional expansion modules provide additional
Ethernet, Fast Ethernet, and Gigabit E thernet connectivity.
An Avaya P330 stack can contain up to 10 switches and up to 3 backup power
supply units. The stacked switches are connected using the Avaya X330STK
stacking Modules which plug into a slot in the back of the Avaya P330. They are
connected using the X330SC or X330LC cable (if the stack is split between two
racks). The Avaya X330RC cable connects the top and bottom switches in the stack
and provides redundancy and hot-swappability in the same way that modules can
be swapped in a modular switching chassis.
The Avaya P330 is fully compliant with IEEE standards for VLAN Tagging, Gigabit
Ethernet, Spanning Tree and Flow Control. This full standards-compliance,
combined with auto-negotiation for 10/100/1000 Mbps and half/full duplex
facilitates the expansion of your network to match your company's growing needs.
Avaya P330 Family Features
•You can connect up to 10 Avaya P330 switches in a stack. Moreover, this stack
can be either in one rack or split over several racks using the X330LC Long
Cable, according to your requirements.
•Avaya X330STK - this stacking Module is used to connect Avaya P330 switches
in a stack, via the Octaplane.
•Avaya P330 BUPS - this back-up power supply module supports up to four
Avaya P330 switc hes.
•One RJ-45/RS232 front panel cons ole conn ect or for both termi na l and modem
sessions.
•Two fan units in every switch, with operation sensors.
•One virtual IP address for managing the whole stack, the P330 stack is managed
as a single enti t y.
•Hot-swapping of one switch at a time - by activation of the redundant ca ble:
— Does not disrupt the operation of other Avaya P330 switches.
— Does not change stack configuration.
— Does not require network downtime.
•Connection through Telnet from th e front panel ports of any switch, with:
— multiple levels of password protection
— login and inactivity timeouts
Avaya P332MF User’s Guide1
Chapter 1Avaya P330 Overvie w
Avaya P330 Standards Supported
The Avaya P330 complies with th e following standards.
IEEE
•802.3x Flow Control on all ports
•802.1Q VLAN Tagging support on all ports and 802.1p compatible
•802.1D Bridges and STA
•803.2z Gigabit Ethernet ports
•803.2u Ethernet/Fast Ethernet ports
IETF
•MIB-II - RFC 1213
•Bridge MIB for Spanning Tree - RFC 1492
•RMON - RFC 1757
•SMON - RFC 2613
•Bridge MIB Groups - RFC 2674 dot1dbase and dot1dStp fully implemented.
Support for relevant MIB objects: dot1q (dot1qBase, dot1qVlanCurrent)
Avaya P330 Network Management
Comprehensive network management is a ke y component of today’s networks.
Therefore we have provided multiple ways of managing the Avaya P330 to suit
your needs.
Avaya P330 Device Manager (Embedded Web)
The built-in Avaya P330 Device Manager (Embedded Web Manager) allows you to
manage an Avaya P330 stack usin g a Web browser without purchasing additional
software. This application works with the Microsoft® Internet Explorer and
Netscape® Navigator web browsers and Sun Microsystems Java™ Plug-in.
Avaya P330 Command Line I nterface (CLI)
The Avaya P330 CLI provides a terminal type configuration tool for local or remote
configuration of Avaya P330 f eatures and functions.
2Avaya P332MF User’s Guide
Avaya Multi-Service Network Manager™
When you need extra con t rol and monitoring or wish to manage other Caj u n
Campus equipment, then the Avaya Multi-Service Network Manager network
management suite is the answer. This suite provides the ease-of-use and features
necessary for optimal network utilization.
•Avaya Multi-Service Network Manager is available for Windows® NT®/2000
and Solaris 8.
•Avaya Multi-Service Network Manager can operate in Stand-Alone mode with
Windows® NT®/2000.
•Avaya Multi-Service Network Manager operates under HP OpenView for
Windows® NT®/2000 and Solaris 8.
Avaya P330 Network Monitoring
RMON MIBs - RFC 1757
•RMON support for groups 1,2,3 and 9
— Statistics
—History
—Alarms
—Events
Chapter 1Avaya P330 Overvie w
SMON MIBs - RFC 2613
•SMON support for groups
— Data Source Capabilities
—Port Copy
— VLAN and Priority Statistics
Bridge MIB Groups - RFC 2674
•dot1dbase and dot1dStp fully implemented.
•Support for relevant MIB objects: dot1q (dot1qBase, dot1qVlanCurrent)
Port Mirroring
The Avaya P330 provides port mirroring for additional network monitoring
functionality. You can filter the traffic and mirror either incoming traffic to the
source port or both incoming and outgoing traffic. This allows you to monitor the
network traffic you need.
Ports which are members in a Link Aggregation Group (LAG) cannot also be used as
Port Mirroring Destination or Source ports.
Avaya P332MF User’s Guide3
Chapter 1Avaya P330 Overvie w
SMON
The Avaya P330 supports Avaya’s g round-breaking SMON Switched Network
Monitoring, whic h the IETF has now adop ted as a standard ( RFC2613). SMON
provides an unprecedented top-down monitoring of switched network traffic at the
following levels:
•Enterprise Monitoring
•Device Monitoring
•VLAN Monitoring
•Port-level Monitoring
This top-down approach gives you rapid troubleshooting and performance
trending to keep the network running optimally.
Note: Avaya Multi-Service Network Manager is required to run SMON monitoring.
Note: You need to purchase one SMON License per Avaya P330 Stack.
4Avaya P332MF User’s Guide
Chapter 2
Applications
The following sections describe typical applications for the Avaya P330 in a network
with other Cajun Campus products.
Application 1
This application sho ws Avaya P882 as the netwo rk backbone with Avaya P3 33T and
Avaya P334T stacks as closet devices with LAG and redundant links.
Figure 2.1Avaya P333T and Avaya P334T stacks with an Avaya P882 Backbone
This application shows an Avaya P330 st ack formi n g the backbo ne of a Smal l /
Medium-sized Enterprise (SME) network with Avaya P330 stacks as closet devices
with LAN and redundant links.
Figure 2.2Avaya P330 stacks with an Avaya 330 backbone
Avaya P330
10/100 Mbps Ethernet
10/100 Mbps Ethernet
LAG
Redundancy
Gigabit Ethernet
Avaya P330
10/100 Mbps Ethernet
with LAG
4x100 Mbps
LAG
Gigabit Ethernet
with LAG
4x100 Mbps
LAG
6Avaya P332MF User’s Guide
Application 3
This application shows Avaya P880 as the network backbone with Avaya P332MF
deployed as a distribution switch. An Avaya P333R multilayer switch provides local
IP routing. The Avaya P333T stacks act as closet devices with LAG and redundant
links.
Figure 2.3Avaya P332MF with an A v aya P882 backb one
10/100 Mbps Ethernet
LAG
Redundancy
Chapter 2Applications
10/100 Mbps Ethernet
100 Mbps
Fiber Optic
Ethernet
with LAG
Redundancy
Gigabit Ethernet
with LAG
10/100 Mbps Ethernet
LAG
Avaya P332MF
AvayaP880
Avaya P882
LAG
Redundancy
Gigabit Ethernet
4x100 Mbps
with LAG
LAG
100 Mbps
Fiber Optic
Ethernet
with LAG
Avaya P333R
Avaya P332MF
10/100 Mbps
Ethernet
Server Farm
10/100 Mbps
Ethernet
Avaya P332MF User’s Guide7
Chapter 3
Avaya P332MF Front and Back Panels
Avaya P332MF Front Panel
The Avaya P332MF front panel contains LEDs, controls, connectors and an
expansion Module slot, as well as a console connector. The status LEDs and control
buttons provide at-a-glance in formation.
The front panel LEDs consist of Port LEDs and Function LEDs. The Port LEDs
display information for each port according to the illuminated function LED. The
function is selected by pressing the left or right button until the desired parameter
LED is illuminated.
For example, if the COL LED is illuminated, then all Port LEDs sho w the collision
status of their respective port. If you wish to select the LAG function, then press the
right button until the LAG Function LED is lit; if you then wish to select Rx then
press the left button several times until the Rx function LED lights.
Figure 3.1 shows the Avaya P332MF front pane l. Figure 3.2 shows a detailed view
of the LEDs (described in Table 3.1), pushbuttons, the Expansion Module slot, and
the RJ-45 console connector at the bottom right.
Figure 3.1Avaya P332MF Front Panel
Avaya P332MF User’s Guide8
Figure 3.2Avaya P332MF LEDs
45678
9
PWR
OPR
SYS
51
EXPANSION
SLOT
525354
59 60 61 62 63 64 65 66
55 56 57 58
Chapter 3Avaya P332MF Front and Back Panel s
Port LEDs
123
10 11 12
Hspd
FC
Left/Right
and Reset (both)
Switches
FIV
FIV Switch
LNK COL TxFDXRx
Function LEDs
Note: All LEDs are lit during a reset.
Table 3.1Avaya P332MF LED Descriptions
LED NameDescriptionLED Status
OFF – power is off
PWRPower status
ON – power is on
Blink – using BUPS only
OFF – Module is booting
OPRCPU operation
ON – Normal operation
OFF – Module is a slave in a stack
ON – Module is the Master of the stack and
the Octaplane and Redundant cable are
SYSSystem Status
connected correctly.
This LED will also light in Standalone mode.
LAG
Blink – Box is the stack Master and the stack
is in redundant mode.
The following Function LEDs ap ply to ports 1 to 66
OFF – Port disabled
LNKPort status
ON – Port enabled and link OK
Blink – Port enabled and the link is d own
Avaya P332MF User’s Guide9
Chapter 3Avaya P332MF Fr ont and Back Panels
Table 3.1Avaya P332MF LED Descri ptions
LED NameDescriptionLED Status
COLCollision
OFF – No collision or FDX port
ON – Collision occurred on line
OFF – No transmit activity
TxTransmit to line
ON – Data transmitted on line from the
module
OFF – No receive activity
RxReceive from line
ON – Data received from the line into the
module
OFF – Half duplex mode
FDXHalf/Full Duplex
ON – Full duplex mode
OFF – No Flow Control
FCFlow Control
ON – Symmetric/Asymmetric Flow Control
mode is enabled and port is in full duplex
mode.
HspdHigh Speed10/100
OFF:10N/A
ON:1001000
LAG
Link Aggregat ion
Group (Trunking)
OFF – No LAG defined for this port
ON – Port belongs to a L AG
1000
Table 3.2Avaya P330 <- -> Select buttons
DescriptionFunction
Left/RightIndividual – select LED function (see table above).
Reset modulePress both right and left buttons together for approximately two
seconds. All LEDs on module light up until buttons are
released.
Reset stackPress both right and left buttons together for 4 seconds. All
LEDs on stack light up until buttons are released.
FIVForce Initial Version – boot from backup initial version of the
Avaya P330 software, from Bank A (see Note below).
10Avaya P332MF User’s Guide
Chapter 3Avaya P332MF Front and Back Panel s
Note: To perform “Force Initial Version” reset the module and at th e same time
press the FIV reset button (use an opened paper clip or other pointed object).
Release the reset buttons first and 1 or 2 seconds later, release the FIV button.
Note: The Port LEDs of the P332MF are numbered from 1-12. Expansion Module
ports are numbered from 51. Port LED numbers 49-50 are reserved.
Avaya P332MF User’s Guide11
Chapter 3Avaya P332MF Fr ont and Back Panels
Avaya P330 Back Panel
The Avaya P330 back panel contains a stacki ng su b-m od ule s lot , powe r supply an d
BUPS connector. Figure 3.3 shows the back panel of the AC switch (top) and the DC
switch (bottom) with a stacking sub-module installed.
Figure 3.3Avaya P330 AC and DC Back Panels
Note: Further illustrations of the Avay a P330 Back Panel will be that of the AC
model, the topmost panel in Figure 3.3.
Figure 3.3 shows the back panel of the AC switch ( top) and the DC switch (bottom)
with a stacking sub-module installed.
BUPS Input Connector
The BUPS input connector (see Figure 3.4) is a 5 VDC connector for use with the
Avaya P330 BUPS unit only. A BUPS Input sticker appears directly to the right the
BUPS input connector.
Figure 3.4BUP S In put Connector Sticker
BUPS Input
12Avaya P332MF User’s Guide
Chapter 3Avaya P332MF Front and Back Panel s
Avaya P332MF User’s Guide13
Chapter 3Avaya P332MF Fr ont and Back Panels
14Avaya P332MF User’s Guide
Loading...
+ 152 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.