Avaya G600, S8400, CMC1 Quick Start Manual
Quick Start
for Hardware Migration
Avaya S8400 Media Server in an
Avaya CMC1 or G600 Media
Gateway
03-300706
Issue 1
February 2006
700385271
© 2006 Avaya Inc.
All Rights Reserved.
Notice
While reasonable efforts were made to ensure that
the information in this document was complete and
accurate at the time of printing, Avaya Inc. ca n
assume no liability for any errors. Changes and
corrections to the information in this document may
be incorporated in future releases.
For full legal page information, please see the
complete document, Avaya Legal Page for
Hardware Documentation, document number
03-600759.
To locate this document on our Web site,
simply go to http://www.avaya.com/support
search for the document number in the search
box.
Documentation disclaimer
Avaya Inc. is not responsible for any modifications,
additions, or deletions to the original published
version of this documentation unless such
modifications, additions, or deletions were
performed by Avaya. Customer and/or End User
agree to indemnify and hold harmless Avaya,
Avaya's agents, servants and employees agai nst
all claims, lawsuits, demands and judgments
arising out of, or in connection with, subsequent
modifications, additions or deletions to this
documentation to the extent made by the Customer
or End User.
Link disclaimer
Avaya Inc. is not responsible for the contents or
reliability of any linked Web sites referenced
elsewhere within this documentation, and Avaya
does not necessarily endorse the products,
services, or information described or offered within
them. We cannot guarantee that these links will
work all of the time and we have no control over the
availability of the linked pages.
and
Warranty
Avaya Inc. provides a limited warranty on this
product. Refer to your sales agreement to establish
the terms of the limited warranty. In addition,
Avaya’s standard warranty language, as well as
information regarding support for this product, while
under warranty, is available through the following
Web site:
http://www.avaya.com/support
Copyright
Except where expressly stated otherwise, the
Product is protected by copyright and other laws
respecting proprietary rights. Unauthorized
reproduction, transfer , and or use can be a criminal,
as well as a civil, offense under the applicable law.
Avaya support
Avaya provides a telephone number for you to use
to report problems or to ask questions about your
product. The support telephone number
is 1-800-242-2121 in the United States. For
additional support telephone numbers, see the
Avaya Web site: http://www.avaya.com/support
.
.
Process and Specifications
1 Verifying the Equipment
2 Administering the Existing System
3 Shutting Down the Existing System
4 Removing Old Equipment
5 Installing the Hardware
6 Connecting the Cables
7 Configuring the UPS
8 Connecting the Laptop
9 Powering Up the System
10 Troubleshooting
Hardware Specifications
Weight Dimensions
Equipment English (lb) Metric (kg) English (in) Metric (cm) Us
UPS >34 >15 3.5 x 17 x 19 9 x 43 x 48 2
Issue 1 February 2006 3
Legend
Avaya technician
or business partner
Straight-through
CAT5 cable
2
Sequence step
Crossover
cable
D
o
cu
m
e
n
tation
Product
documentation
Customer
Nonswitched
electrical outlet
Services
laptop
Customer
network
System
administration
Filled-out Electronic
Pre-Installation
Worksheet (EPW)
Anti-static wrist
ground strap
required
Warning
Use 2 people
to lift equipment
8400qslg LAO 101405
4 Quick Start for Hardware Migration: S8400 Media Server in a CMC1 or G600 Media Gateway
1 Verifying the Equipment
CAT5
IPSI control
network cables
TN8412AP
circuit pack
Product
documentation
Documentation
CAT5
(1)
Laptop to
server cable
TN8400AP
circuit pack
USB
CD-ROM
(1)
USB modem
cable
E
S
U
IN
D
R
A
C
E
V
O
M
M
R
E
A
L
R
A
TO
K
O
E
IC
V
R
E
S
(1)
Compact
Flash card
(128 Mb)
Modem (1)
Services laptop
RS232 DEBUG
ETHERNET
T
b
0
0
/1
0
1
Cable
adapters
(1)
Media Server
cable adapter
SNMP module and cable
(1)
(1)
U
S
B
E
T
H
A
E
T
H
B
E
T
H
C
E
T
H
D
f
f
O
n
O
1 2
Flat-head
screwdriver
Control network
CAT5
(1)
cable
Cross-point
screwdriver
Customer network
System administration
and filled-out Electronic
Pre-Installation Worksheet (EPW)
Screws
Screws
UPS (1)
19 in. (48.3 cm)
data rack (1)
8400qs1b LAO 101405
Issue 1 February 2006 5
2a Administering the Existing System (CSI)
For complete information on performing these tasks, see Migrating to an Avaya S8400 Media Server in
Upgrading, Migrating and Converting Media Servers and Gateways, 03-300412.
Task Command
Connect to the processor 1. 192.11.13.6
Remove the Netcon
data modules
Verify the system status 1. list configuration all
Record all busyouts 1. display errors
Note the node names
and IP addresses
Save the translations 1. save translation
1. list data module
2. list user ext user
3. change hunt-group hunt group number
4. remove data-module extension
2. list trunk-group
3. list hunt-group
1. display ip-interfaces
2. list node-names
6 Quick Start for Hardware Migration: S8400 Media Server in a CMC1 or G600 Media Gateway
2b Administering the Existing System (S8100)
For complete information on performing these tasks, see Migrating to an Avaya S8400 Media Server in
Upgrading, Migrating and Converting Media Servers and Gateways, 03-300412.
Task Command
Connect to the
processor
Save the translations 1. multivantage
Format the compact
flash
Verify the system status 1. list configuration all
Record all busyouts 1. display errors
Note the node names
and IP addresses
Copy the translations to
the Compact Flash
1. 192.11.13.6
2. save translation
2. list trunk-group
3. list hunt-group
1. display ip-interfaces
2. list node-names
Issue 1 February 2006 7
Loading...