Avaya FR-33.1 User Manual

Quick Start Guide

FR-33.1 for Avaya

www.ipevo.com

FR-33.1 User Guide for Avaya

Minimum System Requirements

• Microsoft Windows XP

• 400MHz processor

• 128MB RAM

• 50MB free hard disk space

• USB port

• Broadband Internet connection

1. Before you begin

This version of FR-33.1 has been designed to support the Avaya IP Softphone R6. Please make sure that
the Avaya IP Softphone R6 has been installed, configured correctly on your system and running in the
classic call bar style mode before installing and using FR-33.1.

2. Installation Guide

To install the FR-33.1 Driver for Avaya, please download the latest version of the software from
the product page of the website at http://www.ipevo.com. Below is an outline of the installation
procedure.

1. After you have downloaded the driver, double click on the IPEVO Control Center – Avaya icon to
install the software. Follow the on screen instructions to proceed with the installation.

2. Connect FR-33.1 to your computer’s USB Port when prompted during the installation procedures.

3. Once installation is complete, the IPEVO Control Center - Avaya icon will appear on the system tray
of your desktop. The Control Center allows you to conveniently access and customize preferences for
FR-33.1.

2

FR-33.1 User Guide for Avaya

3. Hardware Configuration

If you are using FR-33.1 with Avaya for the first time, you need to select the Audio Tuning Wizard
from Avaya, and Choose FR-33.1 for your primary playback and recording device. Proceed with the
remaining steps in the Audio Tuning Wizard to complete the hardware configuration. The settings are
then saved and applied when you use FR-33.1 with Avaya.

The IPEVO Control Center - Avaya lets you easily configure basic settings for FR-33.1, including Audio
Settings and Ring tone style settings. This program can be accessed from the system tray or from the
Start Menu.

3