Avaya 2526T, 2550T, 2550T-PWR, 2526T-PWR Regulatory Information
Regulatory Information for the Avaya
Ethernet Routing Switch 2500 Series
NN47215-100 (323169-B Rev 02.02), 02.04
November 2010
4.1
©
2010 Avaya Inc.
All Rights Reserved.
Notice
While reasonable efforts have been made to ensure that the
information in this document is complete and accurate at the time of
printing, Avaya assumes no liability for any errors. Avaya reserves the
right to make changes and corrections to the information in this
document without the obligation to notify any person or organization of
such changes.
Documentation disclaimer
Avaya shall not be responsible for any modifications, additions, or
deletions to the original published version of this documentation unless
such modifications, additions, or deletions were performed by Avaya.
End User agree to indemnify and hold harmless Avaya, Avaya's agents,
servants and employees against all claims, lawsuits, demands and
judgments arising out of, or in connection with, subsequent
modifications, additions or deletions to this documentation, to the
extent made by End User.
Link disclaimer
Avaya is not responsible for the contents or reliability of any linked Web
sites referenced within this site or documentation(s) provided by Avaya.
Avaya is not responsible for the accuracy of any information, statement
or content provided on these sites and does not necessarily endorse
the products, services, or information described or offered within them.
Avaya does not guarantee that these links will work all the time and has
no control over the availability of the linked pages.
Warranty
Avaya provides a limited warranty on this product. Refer to your sales
agreement to establish the terms of the limited warranty. In addition,
Avaya’s standard warranty language, as well as information regarding
support for this product, while under warranty, is available to Avaya
customers and other parties through the Avaya Support Web site:
http://www.avaya.com/support. Please note that if you acquired the
product from an authorized Avaya reseller outside of the United States
and Canada, the warranty is provided to you by said Avaya reseller and
not by Avaya.
Licenses
THE SOFTWARE LICENSE TERMS AVAILABLE ON THE AVAYA
WEBSITE,
APPLICABLE TO ANYONE WHO DOWNLOADS, USES AND/OR
INSTALLS AVAYA SOFTWARE, PURCHASED FROM AVAYA INC.,
ANY AVAYA AFFILIATE, OR AN AUTHORIZED AVAYA RESELLER
(AS APPLICABLE) UNDER A COMMERCIAL AGREEMENT WITH
AVAYA OR AN AUTHORIZED AVAYA RESELLER. UNLESS
OTHERWISE AGREED TO BY AVAYA IN WRITING, AVAYA DOES
NOT EXTEND THIS LICENSE IF THE SOFTWARE WAS OBTAINED
FROM ANYONE OTHER THAN AVAYA, AN AVAYA AFFILIATE OR AN
AVAYA AUTHORIZED RESELLER, AND AVAYA RESERVES THE
RIGHT TO TAKE LEGAL ACTION AGAINST YOU AND ANYONE
ELSE USING OR SELLING THE SOFTWARE WITHOUT A LICENSE.
BY INSTALLING, DOWNLOADING OR USING THE SOFTWARE, OR
AUTHORIZING OTHERS TO DO SO, YOU, ON BEHALF OF
YOURSELF AND THE ENTITY FOR WHOM YOU ARE INSTALLING,
DOWNLOADING OR USING THE SOFTWARE (HEREINAFTER
REFERRED TO INTERCHANGEABLY AS “YOU” AND “END USER”),
AGREE TO THESE TERMS AND CONDITIONS AND CREATE A
BINDING CONTRACT BETWEEN YOU AND AVAYA INC. OR THE
APPLICABLE AVAYA AFFILIATE (“AVAYA”).
Copyright
Except where expressly stated otherwise, no use should be made of
materials on this site, the Documentation(s) and Product(s) provided
by Avaya. All content on this site, the documentation(s) and the
product(s) provided by Avaya including the selection, arrangement and
design of the content is owned either by Avaya or its licensors and is
HTTP://SUPPORT.AVAYA.COM/LICENSEINFO/ ARE
protected by copyright and other intellectual property laws including the
sui generis rights relating to the protection of databases. You may not
modify, copy, reproduce, republish, upload, post, transmit or distribute
in any way any content, in whole or in part, including any code and
software. Unauthorized reproduction, transmission, dissemination,
storage, and or use without the express written consent of Avaya can
be a criminal, as well as a civil, offense under the applicable law.
Third-party components
Certain software programs or portions thereof included in the Product
may contain software distributed under third party agreements (“Third
Party Components”), which may contain terms that expand or limit
rights to use certain portions of the Product (“Third Party Terms”).
Information regarding distributed Linux OS source code (for those
Products that have distributed the Linux OS source code), and
identifying the copyright holders of the Third Party Components and the
Third Party Terms that apply to them is available on the Avaya Support
Web site:
Trademarks
The trademarks, logos and service marks (“Marks”) displayed in this
site, the documentation(s) and product(s) provided by Avaya are the
registered or unregistered Marks of Avaya, its affiliates, or other third
parties. Users are not permitted to use such Marks without prior written
consent from Avaya or such third party which may own the Mark.
Nothing contained in this site, the documentation(s) and product(s)
should be construed as granting, by implication, estoppel, or otherwise,
any license or right in and to the Marks without the express written
permission of Avaya or the applicable third party.
Avaya is a registered trademark of Avaya Inc.
All other trademarks are the property of their respective owners.
Downloading documents
For the most current versions of documentation, see the Avaya Support
Web site:
Contact Avaya Support
Avaya provides a telephone number for you to use to report problems
or to ask questions about your product. The support telephone number
is 1-800-242-2121 in the United States. For additional support
telephone numbers, see the Avaya Web site: http://www.avaya.com/
support
http://www.avaya.com/support/Copyright/.
http://www.avaya.com/support
2 Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010
Contents
Chapter 1: Regulatory information and safety precautions..................................................5
Chapter 2: New in this release................................................................................................11
Chapter 3: Before You Begin..................................................................................................13
Before you begin.............................................................................................................................................13
Installing the switch on a table or shelf...................................................................................................13
Installing the switch in an equipment rack..............................................................................................14
Power specifications...............................................................................................................................15
Connecting AC power.............................................................................................................................16
Safety messages....................................................................................................................................18
Chapter 4: Deutsche................................................................................................................21
Hinweise zur Verwendung...............................................................................................................................21
Installation des Switch auf einem Tisch oder Regal...............................................................................21
Installation des Switch in einem Rack....................................................................................................22
Leistungsdaten.......................................................................................................................................23
Wechselstrom-Anschluss.......................................................................................................................24
Sicherheitsinformationen........................................................................................................................26
Chapter 5: Español..................................................................................................................29
Antes de comenzar.........................................................................................................................................29
Instalación del conmutador en una mesa o estantería...........................................................................29
Instalación del conmutador en un bastidor para equipos.......................................................................30
Especificaciones eléctricas.............................................................................................................................31
Conexión a CA................................................................................................................................................32
Mensajes de seguridad...................................................................................................................................33
Chapter 6: Français.................................................................................................................35
Avant de commencer......................................................................................................................................35
Installation du commutateur sur une table ou sur une étagère.......................................................................35
Installation du commutateur dans un rack......................................................................................................36
Alimentation: Caractéristiques........................................................................................................................37
Alimentation secteur: connexion.....................................................................................................................38
Messages de sécurité.....................................................................................................................................40
Chapter 7: Português..............................................................................................................43
Antes de você comece....................................................................................................................................43
Instalando o ERS 2500 Series em uma tabela ou em uma prateleira............................................................43
Instalando o ERS 2500 Series em uma cremalheira de equipamento...........................................................44
Especificações do poder.................................................................................................................................46
Poder de C.A. conectando..............................................................................................................................46
Mensagens de segurança...............................................................................................................................48
Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010 3
4 Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010
Chapter 1: Regulatory information and
safety precautions
Read the information in this section to learn about regulatory conformities and compliance.
International Regulatory Statements of Conformity
This is to certify that the Ethernet Routing Switch 2500 Series equipment was evaluated to the international
regulatory standards for electromagnetic compliance (EMC) and safety and were found to have met the
requirements for the following international standards:
EMC – Electromagnetic Emissions – CISPR 22, Class A
EMC – Electromagnetic Immunity – CISPR 24
Electrical Safety – IEC 60950, with CB member national deviations Further, the equipment has been
certified as compliant with the national standards as detailed below
National Electromagnetic Compliance (EMC) Statements of Compliance
FCC statement (USA only)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed
and used in accordance with the instruction manual, it may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference, in
which case users will be required to take whatever measures may be necessary to correct the interference
at their own expense.
ICES statement (Canada only)
Canadian Department of Communications Radio Interference Regulations
This digital apparatus (Ethernet Routing Switch 2500 Series) does not exceed the Class A limits for radionoise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Règlement sur le brouillage radioélectrique du ministère des Communications
Cet appareil numérique (le commutateur ERS 2500 Series) respecte les limites de bruits radioélectriques
visant les appareils numériques de classe A prescrites dans le Règlement sur le brouillage radioélectrique
du ministère des Communications du Canada.
Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010 5
Regulatory information and safety precautions
CE marking statement (Europe only)
EN 55022 statements
This is to certify that the Ethernet Routing Switch 2500 Series equipment is shielded against the generation
of radio interference in accordance with the application of Council Directive 2004/108/EC. Conformity is
declared by the application of EN 55022 Class A (CISPR 22).
EN 55024 statement
This is to certify that the Ethernet Routing Switch 2500 Series are shielded against the susceptibility to
radio interference in accordance with the application of Council Directive 2004/108/EC. Conformity is
declared by the application of EN 55024 (CISPR 24).
EN 300386 statement
The Ethernet Routing Switch 2500 Series complies with the requirements of EN 300386 V1.3.3 for
emissions and for immunity for a Class A device intended for use in either Telecommunications centre or
locations other than telecommunications centres given the performance criteria as specified by the
manufacturer.
European Union and European Free Trade Association (EFTA) notice
All products labeled with the CE marking comply with R&TTE Directive (1999/5/ EEC) which includes the Electromagnetic
Compliance (EMC) Directive (2004/108/ EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European
Community.
Compliance with these directives implies conformity to the following European Norms (ENs). The
equivalent international standards are listed in parenthesis
.
EN 55022 (CISPR 22)–Electromagnetic Interference
EN 55024 (IEC 61000-4-2, -3, -4, -5, -6, -8, -11)–Electromagnetic Immunity
EN 61000-3-2 (IEC 610000-3-2)–Power Line Harmonics
EN 61000-3-3 (IEC 610000-3-3)–Power Line Flicker
VCCI statement (Japan/Nippon only)
This is a Class A product based on the standard of the Voluntary Control Council for Interference (VCCI) for
information technology equipment. If this equipment is used in a domestic environment, radio disturbance
may arise. When such trouble occurs, the user may be required to take corrective actions.
6 Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010
BSMI statement (Taiwan only)
This is a Class A product based on the standard of the Bureau of Standards, Metrology and Inspection
(BSMI) CNS 13438 and CNS14336 , Class A.
MIC notice (Republic of Korea only)
This device has been approved for use in Business applications only per the Class A requirements of the
Republic of Korea Ministry of Information and Communications (MIC). This device may not be sold for
use in a non-business application. Observe the Regulatory Marking label on the back or bottom of each
switch for specific certification information pertaining to this model. Each Ethernet Routing Switch 4500
Series model is approved for shipment to/usage in Korea and is labeled as such, with all appropriate text
and the appropriate MIC reference number.
National Safety Statements of Compliance
EN 60950 statement
This is to certify that the Ethernet Routing Switch 2500 Series equipment is in compliance with the
requirements of EN 60950 in accordance with the Low Voltage Directive. Additional national differences
for all European Union countries have been evaluated for compliance.
NOM statement (Mexico only)
The following information is provided on the devices described in this document in compliance with the
safety requirements of the Norma Oficial Méxicana (NOM):
Exporter: Avaya Inc., 4655 Great America Parkway, Santa Clara, CA 95054 USA.
Importer: Avaya Communication de México S.A. de C.V.
Av. Presidente Masarik 111
Piso 6,
Col Chapultepec Morales
Deleg. Miguel Hidalgo
México D.F. 11570
Input: Ethernet Routing Switch 2500 Series:
• 2526T 100-240 VAC 0,8 A MAX 50-60 Hz
• 2550T 100-240 VAC 0,8 A MAX 50-60 Hz
• 2526T-PWR 100-240 VAC 2,9 A MAX 50-60 Hz
• 2550T-PWR 100-240 VAC 2,9 A MAX 50-60 Hz
Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010 7
Regulatory information and safety precautions
Información NOM (unicamente para México)
La información siguiente se proporciona en el dispositivo o en los dispositivos descritos en este
documento, en cumplimiento con los requisitos de la Norma Oficial Méxicana (NOM):
Exportador: Avaya Inc., 4655 Great America Parkway, Santa Clara, CA 95054 USA.
Importador: Avaya Communication de México S.A. de C.V.
Av. Presidente Masarik 111
Piso 6,
Col Chapultepec Morales
Deleg. Miguel Hidalgo
México D.F. 11570
Embarcar a: Ethernet Routing Switch 2500 Series
• 2526T 100-240 VAC 0,8 A MAX 50-60 Hz
• 2550T 100-240 VAC 0,8 A MAX 50-60 Hz
• 2526T-PWR 100-240 VAC 2,9 A MAX 50-60 Hz
• 2550T-PWR 100-240 VAC 2,9 A MAX 50-60 Hz
Denan statement (Japan/Nippon only)
National Environmental Statement of Compliance
The WEEE Directive 2002/96/EC sets collection, recycling and recovery targets for various categories of
electrical products and their waste.
Restriction on Hazardous Substances Directive Compliance Statement
The Restriction on Hazardous Substances Directive (RoHS) (2002/95/EC), which accompanies the WEEE
Directive, bans the use of heavy metals and brominated flameretardants in the manufacture of electrical
and electronic equipment. Specifically, restricted materials under the RoHS Directive are Lead (including
solder used in PCB’s), Cadmium, Mercury, Hexavalent Chromium, and Bromine. Avaya declares
compliance with the European Union (EU) RoHS Directive (2002/95/EC).
8 Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010
WEEE Directive Compliance Statement
This product at end of life is subject to separate collection and treatment in the EU Member States, Norway, and Switzerland and therefore
is marked with the symbol shown at the left. Treatment applied at end of life of these products in these countries shall comply with the
applicable national laws implementing Directive 2002/96/EC on Waste of Electrical and Electronic Equipment (WEEE). Avaya declares
compliance with the European Union (EU) WEEE Directive (2002/96/EC).
Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010 9
Regulatory information and safety precautions
10 Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010
Chapter 2: New in this release
There have been are no feature updates or other changes to the document in this release.
Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010 11
New in this release
12 Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010
Chapter 3: Before You Begin
Before you begin
Ensure the area where you install and use the ERS 2500 Series switch meets the following
environmental requirements:
• Ambient temperature between 32° and 104° F (0° and 40° C)
• Relative humidity between 5% and 85% noncondensing
• No nearby heat sources such as hot air vents or direct sunlight
• No nearby sources of severe electromagnetic noise
• No excessive dust
• Adequate power source within six feet; one 15-Amp circuit required for each power supply
• At least 2 inches (5.08 cm) on each side of the switch unit for ventilation
• Adequate space at the front and rear of the switch for access to cables
If you are installing a single Ethernet Routing Switch 2500 on a table or shelf, ensure the
surface can support at least 15 to 20 pounds (7 to 9 kilograms).
Installing the switch on a table or shelf
You can install a single Ethernet Routing Switch 2500 on any flat surface that can safely support
the weight of the switch and attached cables (15 to 20 pounds or 7 to 9 kilograms).
The following figures provide instructions for installing the switch on a table or shelf.
Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010 13
Before You Begin
Attach the rubber feet at the marked locations.
Set the switch on a table or shelf.
Important:
Allow at least 2 inches (5.1 cm) on each side for proper ventilation and at least 5 inches
(12.7 cm) at the back for power cord clearance.
Installing the switch in an equipment rack
Required tool: Phillips screwdriver for attaching brackets to the switch.
14 Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010
Before you begin
Rack requirements:
A space of 2.8 inches for each switch in an EIA or IEC standard 19 inch (48.2 centimeter)
equipment rack.
• The rack must be bolted to the floor and braced, if necessary.
• The rack must be grounded to the same grounding electrode used by the power service in
the area. The ground path must be permanent and must not exceed 1 ohm of resistance
from the rack to the grounding electrode.
The following figures provide instruction for installing the switch in a rack.
Attach a bracket to each side of the switch.
Slide the switch into the rack. Insert and tighten the rack mount screws.
Power specifications
Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010 15
Loading...