Avantree Technology BTSP 006P BLK User Manual
LED
ON OFF
LED
ON OFF
BTSP-006P-BLK
For a Beer Experience
User Manual
Wireless Mini Soundbar
Torpedo Plus
www.avantree.com
4. Pair and connect with Bluetooth-enabled devices
STEP1 Get Torpedo Plus into paring mode – For first time use, power on, Torpedo
Plus will automatically enter pairing mode and keep flash Red and Blue
alternatively.
Activate Bluetooth on your phone/PC/notebook and select ‘Torpedo Plus’.
STEP 2
(For PC, make sure the playback device is Torpedo Plus.)
STEP 3 Once connected, you will hear a beep and the LED indicator will stay on.
NOTE:
Once disconnected, Torpedo Plus will automatically enter pairing mode.
For details on how to set up with your PC/notebook, please see support.avantree.com
Torpedo Plus
1. Wireless speaker overview
Mode Indicator
MODE
MODE
-
Torpedo Plus
Volume down
Previous track
Charging LED indicator
charging port
Power
Volume up
Next track
+
Power ON/OFF Aux in
NOTE:
All accessories are also available on avantree.com
- 1 - - 2 - - 3 -
Reconnect Bluetooth
Whenever you turn on Torpedo Plus again it will be automatically reconnected to the
latest device.
5. Connect with non-Bluetooth-enabled devices
When the device is not Bluetooth enabled, it can be connected to the speaker by
using the 3.5 mm audio cable. The speaker will automatically switch to the external
audio input mode and the indicator will stay on.
LED
ON OFF
3.5mm audio cable
2. What’s in the box?
• Wireless mini soundbar
• AC adapter
• Micro USB charging cable
• 3.5mm audio cable
• User manual / Quick user guide
AC adapter
Micro USB
charging cable
3.5mm audio cable
Quick user guide
Torpedo Plus
For a Beer Experience
User Manual
Wireless Mini Soundbar
Torpedo Plus
www.avantree.com
User manual /
6. Connect with two devices simultaneously
STEP1 Connect Torpedo Plus with the first device as above. Then turn off Blueooth
of the first device.
STEP2 Connect Torpedo plus with the second device as above.
STEP3 Turn on Bluetooth of the first device and click ”Torpedo plus”, it will
re -connect it with Torpedo Plus.
Torpedo Plus
3. Power On/Off
Power ON: Connect Torpedo Plus to AC outlet with the adapter. Slide the on/off
switch to ON.
Power OFF: Slide the on/off switch to OFF.
Note: In order to save battary and extend its life, when there is no audio input for 30
mins, Torpedo plus will turn off automatically. You need to turn off first, then turn
on again for next use.
7. How to use
Once connecting successfully with another device, you can press the MODE button to
switch sound modes:It will automatically go back last audio mode when power on again.
Button Function Opertion LED status
Balance Audio Mode Press MODE once
Super Bass Press MODE once Green
3D Surround Press MODE once Blue
MODE
Manually enter
pairing mode
Clear pairing history
Volume up Press “V+” once
+
Next track
Volume down
-
Previous track
Press and hold MODE
for 3S
Double click MODE (under
pairing mode
)
Press and hold V+” for 2s
Press “V-” once
Press and hold “V-” for 2s
Red
Flash Red and Blue
alternatively
stay purple for 1s,
then flash Red and
Blue alternatively
-
-
-
-
- 4 -
Warnning:
Suggest to use
Torpedo Plus
with our provided charger in order to get high
quality sound.
8. How to charge
If the battery is low, the mode indicator will flash. Normally it takes about 2.5 hours to
fully charge the battery. The charging LED indicator will stay red when charging and will
turn off when fully charged.
LED
ON OFF
Micro USB Charging cable
NOTE
When the battery power is less than 40%, the volume will become smaller as the
battery become lower.
Charging LED indicator
- 8 -
- 5 -
9. Product specifications
• BT Version: 4.1
• Support profiles: A2DP V1.2, AVRCP V1.4
• Built-in battery: 2200 mA / 3.7 V
• Charge time: About 2.5 hours
• Working time on battery up to 5.5 hours
• Operational range: 10 meters
• Output power: 5W×2
• Charger voltage: DC 5 V/ 1.5A
• Frequency response: 50 Hz~20 KHz
• Signal-to-noise ration: >85 dB
• Product weight: 480 g
• Dimensions: 275 mm x 60mm x 50 mm
For more FAQ information, please refer to support.avantree.com
- 9 -
- 6 - - 7 -
10.Warnnings
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not
cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.Changes or modifications not
expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2AITF-BTSP-006P-BLK
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with
minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Dispose of the packaging and
this product in accordance with
the latest provisions.
For a Beer Experience
www.avantree.com
support@avantree.com
Z-PKMN-BTSP-006P-V1
Loading...