Avantree Clipper Pro User Manual

1. AptX Low Latency

Avantree Clipper Pro is a Bluetooth audio receiver incorporating the latest “aptX low
latency” technology, for CD-like quality sound and with virtually no audio delay.
Ideal for games, watching TV and movies without lip sync delay.

To take advantage of the better performance offered by APTX low latency
codec, the other device must also support the same codec (Such as Avantree’s
Saturn Pro, Priva II, Leaf, etc). If the transmitter only supports the normal
AptX codec, or the SBC one, these codecs will be used instead.

2. Product overview & basic operation

Basic operation

3. What’s in the box?

A. Avantree Clipper Pro
B. Avantree 3.5mm audio splitter *1
C. 3.5mm audio cable *1
D. Micro USB charging cable *1
E. User manual & Quick user guide

4. Pairing and connecting

4.1. Connecting to a mobile phone/tablet

Step 1. Ensure Clipper Pro is off.
Step 2. Set Clipper Pro to PAIRING MODE (Press and hold MFB for 6 seconds
until the LED flashes BLUE and RED alternately).
Step 3. Activate Bluetooth on your phone/tablet and select “Avantree
Clipper Pro” to connect.

Reconnect:

Whenever you turn Clipper Pro on again, it will automatically reconnect to your
phone.

4.2. Connecting to a Bluetooth transmitter

Step 1. Ensure Clipper Pro is off.
Step 2. Set Clipper Pro to PAIRING MODE – Press and hold MFB for 6 seconds
until the LED flashes BLUE and RED alternately.
Step 3. Set your Bluetooth transmitter to PAIRING MODE**.
Step 4. Keep the devices close and wait for 5~30 seconds. Once connected, the
LEDs on both devices will slow down.

Step 4. Once connected, turn Clipper Pro off and on again. It will then
automatically reconnect to the two devices simultaneously.
Note: Once disconnected over 10 minutes, Clipper Pro will automatically power
itself off.

5. How to reset to factory default setting?

Step 1. Turn on the Clipper Pro
Step 2. Press and hold the V+ and V- button for 5 seconds
Step 3. The Blue and Red LED will flashes twice then power off at the same time

**PARING MODE: Discoverable mode for Bluetooth device, normally the LED
blinks quickly or flashes between two colors alternately.

4.3. Connecting to two Bluetooth devices simultaneously

Step 1. Connect the first Bluetooth device as above. Then turn off Clipper Pro.
Step 2. Set Clipper Pro to PAIRING MODE again – Press and hold MFB for 6
seconds until the LED flashes BLUE and RED alternately.
Step 3. Connect Clipper Pro to the second Bluetooth device as above.

6. LED indications

3.5 mm Audio jack

LED indicator

Multi-function
button (MFB)

Micro USB port

Microphone

Volume up (Next track)Volume down (Previous track)

Dispose of the packaging and
this product in accordance with
the latest provisions.

Dispose of the packaging and
this product in accordance with
the latest provisions.

Charge from USB charger Charge from PC

www.avantree.com

[e-mail]

Z-PKMN-AS7L-V1

For a Beer Experience

For a Beer Experience

Audio delay by transmier type -

Transmitter support - The audio delay will be
aptX Low Latency codec Around 40ms
aptX codec Around 180ms
SBC codec (most standard Bluetooth audio) Around 250ms

7. Charging

When the LED flashes RED, you should recharge the device. Please remove the
micro-USB protector and charge it. It normally takes around 2 hours to fully charge
the battery. The LED will stay RED when charging and will turn off when charging is
complete.
Charging Requirement
You can connect Clipper Pro via the supplied micro USB cable to your own USB
chargers (wall charger/travel charger/car charger, etc.) with 5V/500mA-1A or PC
USB port. It’s ok to use most mobile phone chargers on the market.

8. Product Specifications

• BT version: 4.2

• BT profile: A2DP, AVRCP, HFP, HSP

• Audio codec: aptX Low Latency, aptX, SBC

• Operational range: Class II, up to 10 meters

• Working time: Up to 6 hours

• Standby time: 100 hours

• Charging time: 2 hours

• Product weight: approx. 15g

• Product size: 50.5*26*18mm

Note: The talk and standby times may vary when used with different mobile phones
or other devices and also defendent upon different usage styles, settings and
operating environment.

Video user guide for Clipper Pro is available on Youtube.com

Telephone support: booking from Avantree.com

More FAQs and instructions on support.avantree.com

Email support: [e-mail]

Avantree US Customer Serivce Line: 800 232 2078
Avantree Europe Customer Serivce Line: [phone]

Power on LED flashes BLUE for 2 seconds

Power off LED flashes RED for 2 seconds

Pairing mode

Connected LED flashes BLUE once every 10 seconds

Disconnected

Low battery

Charging LED stays RED

Fully charged

Restore to default setting

LED flashes BLUE and RED together twice
(appears PINK)

LED flashes BLUE and RED alternately

LED flashes BLUE twice every 10 seconds

Red LED turns off

LED flashes RED once every 30 seconds

Note: Some functions may not work when used with different mobile phones or

other Bluetooth devices.

Button

MFB

V+

V–

Function Operation

Power on/off Hold MFB for 2~3 seconds to turn Clipper Pro on/off

Enter pairing mode

From off mode, press & hold for 6 seconds until the
LED indicator flashes BLUE and RED alternately.

Answer/End a call

Press MFB once when a call is incoming or in progress

Reject a call

Press & hold MFB for 2 seconds when a call is incoming
Last number redial Double click MFB
Play/Pause Press once MFB when streaming music

Press V+ once
Next track Press and hold

Volume up

Volume down

Previous track

Press V- once

Press and hold

Press and hold V+ and V- together for 7 seconds, the

LED flashes BLUE and RED together ( appears PINK)

V+& V-

Restore to
default settings

Connect

Pair

Once connected, the LEDs on
both devices will slow down.

Use your existing headphones
to listen to the TV wirelessly

Enjoy

3

Set Clipper
pro to pairing
mode

Set transmitter
to

PAIRING

MODE*

Keep them
close & wait

Hold MFB 6S, LED
flas

hes BLUE and

RED alternately

Bluetooth

Settings

Bluetooth

Devices

Avantree

Clipper Pro

Connect

Pair

From off, hold for 6s, LED
flashes BLUE and RED
alternately

Activate Bluetooth, search
and select “Clipper Pro” to
connect.

Hold MFB 6S

Enjoy

3

Stream music wirelessly

A. B. C. D.

E.

Dual Link

- 6 -

- 4 -

- 9 - - 10 - - 11 - - 12 -

- 2 -- 1 -

- 5 - - 7 - - 8 -

- 3 -

材质：封面封底128G双铜 + 单色印刷
内页臻品上质80g高白纸 2个小号骑马钉
大约16页， 尺寸W 105 x H 75mm

Contents

1. AptX Low Latency

2. Product overview & basic operation

3. What’s in the box?

4. Pairing and connecting

4.1. Connecting to a mobile phone/tablet

4.2. Connecting to a Bluetooth transmitter

4.3. Connecting to two Bluetooth devices simultaneously

5. How to reset to factory default setting?

6. LED indications

7. Charging

8. Product Specifications

1

11

10

9

7-8

8

6-7

5-6

5

2

4

Status LED indicator

www.avantree.com

User Manual

Wireless Receiver for Headphones

Clipper Pro

For a Beer Experience

www.avantree.com

User Manual

Wireless Receiver for Headphones

Clipper Pro

Mute ON Press and hold V- for 1 second
Voice Dial (Siri) Press V+ and V- together once