Avantree Audition Procast, BTHS-AS9PA User Manual

User Manual

Audition Procast

BTHS-AS9PA

Overview ····································································································································································1

Basic operation ························································································································································· 1

Connect to a Bluetooth device ···························································································································2

Connect to two Bluetooth devices simultaneously ····················································································2

Reconnect to Bluetooth device ·························································································································· 3

Build the Broadcast Network ······························································································································3

Qualcomm® aptX™ Low Latency························································································································4

Use as a wired headphone ···································································································································5

Status of LED indicators ········································································································································5

Charging ·····································································································································································6

Troubleshooting ······················································································································································6

Overview

(MFB)

Broadcast

AUX

Basic operation

General function >

Power on/o ·································· Slide the Power Switch to the middle / . Voice prompts o ························· Hold and simultaneously for 3 seconds Voice prompts on ························· Hold and simultaneously for 3 seconds

Music control >

Pause/Play music ·························· Press once Volume up/down ························· Press or once (please click or tap buttons - pressing and holding or pressing too rapidly will not work) Next/previous track ····················· Hold or for 3 seconds

Call control >

Reject a call ····································· Hold for 1s when receiving an incoming call Last number redial ······················ Double press Mic mute on/o ···························· Hold for 1s to toggle mic mute on/o during a call

Connect to a Bluetooth device

1. Enter headphones into PAIRING MODE – Slide the Power Switch to the middle to turn on the headphones,

then slide the Power Switch to the position and hold for 3s until the LED ashes BLUE and RED alternately.

2. On your device – Turn on Bluetooth and select “Avantree AS9PA” to connect. If you are using a Bluetooth

transmitter, enter your transmitter into PAIRING MODE (please refer to your user manual)

3. Once connected, the headphone LED will turn solid BLUE.

Connect to two Bluetooth devices simultaneously

1. Connect the AS9PA to the FIRST device as shown above.

2. Enter the AS9PA into PAIRING MODE again and repeat steps 2&3 above to connect to the SECOND device.

Note: This feature only works for two mobile devices, such as cellphones and tablets. It doesn’t work for PCs or

Bluetooth transmitters.

+ 5 hidden pages