Avantree BTHS-ANC032 User Manual

User Manual

Wireless Active Noise
Cancelling Headphones

BTHS-ANC032

Overview ······················································································································1

Basic Operations ········································································································1

Connect to a Bluetooth device ·············································································1

Reconnect to Bluetooth device ············································································2

Active Noise Cancellation ·······················································································2

Using as a wired headphone ·················································································2

Status of LED Indicators ··························································································3

Charging ·······················································································································3

Troubleshooting ········································································································4

Overview

Basic Operations

Function Operation

General

Power ON / OFF Hold for about 3s

Enter Pairing Mode

Clear Paired history

Music control

Play / Pause music Press once
Volume up/down Short press + or ­Next/ Previous track Long press + or -

Answer / end a call Press once
Reject a call Hold for 1s when receiving an incoming call
Voice dial(Phone feature) Hold 1s
Redial the last called phone Press twice

Activate / Deactivate Microphone mute

From o status, hold for 5s till the LED indicator
blinks RED and BLUE alternately
After power on, hold BOTH + & - for 5 seconds till LED
blinks RED & BLUE twice then release the buttons.

Call control

In calling status, press BOTH + or - once to activate /
deactivate microphone mute

Connect to a Bluetooth device

1. Set headset into PAIRING MODE – From o state, hold for 5s till the LED indicator ashes RED & BLUE

alternately.

2. On your device, turn on the Bluetooth feature and select “Avantree ANC032” to connect. If you are using a

Bluetooth transmitter, please set your transmitter to PAIRING MODE (follow its user manual).

1