Avantree Audition User Manual

Bluetooth Stereo Headphones

User Guide

Audition

1. Product Description

Avantree Audition is the latest Bluetooth 4.0 stereo headphones with microphone
from Avantree family. It features with over the ear design which will be much
more comfortable. With NFC function, you can touch your phone to it and the
headphones will turn on, connect or disconnect. They are light weight and stylish.
The buttons on the ear cup allow you to play and pause your music
streaming, receive calls, adjust the volume etc. It can connect two devices and
the battery can last a whole week (up to 40hrs)! Even if the battery is low, you
can plug them in with the audio cable and use like wired headphones!

2. Product Overview

3. Charging

Avantree Audition uses universal micro charging socket.

USB charger requirements: 5V/500mA-2A

1) Each charge cycle will take about 3 hours.

2) The LED will indicate red when charging and will turn off when charging is
complete.

Note: When battery power is low, the LED indicator will flash red and you will
hear a beep sound every one minute.

4. Pairing

It is important to pair the headset with your Bluetooth enabled device (such as
mobile phone, tablet etc.) for first time use. We find most of the online technical
support questions are caused by improper pairing between the headset and the
Bluetooth device. Please follow the above instructions step-by-step.

We take Bluetooth enabled mobile phone as example.

NFC pairing -

A. Turn on NFC function from your phone.
B. Let your phone tap NFC location of the headphones until your mobile

phone give an indicate note. (Some phones will vibrate and some will
have a beep sound.)

C. Then your phone will get a reception request if you would like to pair with

the headphones for the first pairing time.
D. Tap “Yes”, then your mobile phone will connect with Audition.
E. Tap it again to turn the headphones off.

Normal Bluetooth pairing -

If your phone doesn’t support NFC, you can follow the following steps to pair.

A. Ensure the headset is off.
B. Press and hold the MFB (multiple function button) about 7-10 seconds

until the LED blinks blue and red alternately.

C. Search for the headset from your phone.