Avantree AH5 User Manual

1. Product Description

Avantree AH5 is a wireless headband headphone with microphone under Avantree family. It features
with PC wirless communication(MSN, SKYPE) and clear mobile communication in noisy environment
(truck,airport,construction site etc). It is your ideal choice of the chatting Bluetooth headset.

2. Product Overview

Contents In Box:

1. Avantree Headphone

2. USB charging cable

3. User manual

3. Charging

1) First time, please charge the device for at least 2.5 hours to make sure the headset is fully

charged and the battery reach its full capacity.

2) Afterwards, each charge cycle may take up to 2.5 hours.

3) LED will indicate red in charging and off when charging is complete.

4) If you have not use the item for a few months, LED might not turn red when first charging. It

might take 15-35 minutes before the LED turn red.

5) We suggest to fully charge the AH5 for at least one time in two months.

Notice:

 When battery power is low, the indicator shows red shimmering light, then you can hear “Do—”

voice, after this, the headset automatically shut off.

4. Turn On / Off

Turn On: From OFF, press and hold the “MFB” around 3 seconds until you hear a “Doo_” tones, the

indicator LED flashes Blue quickly.
Turn Off: From ON, press and hold the “MFB” around 3 seconds until you hear a “Doo_” tones, and
the indicator LED flashes red quickly.

5. Working with mobile phone (Tutorial online)

It is important to pair the headset with your Bluetooth Mobile phone for the first time use.

5.1 Pairing procedure:

A. Ensure the headset is off

B. Press and hold the MFB button for around 5 seconds until LED blink blue and red alternatively.

C. Search the device from your phone.
D. Once found “Avantree AH5’’, follow the steps and enter pin code 0000 to pair. Some phones

don’t need this pin code.
E. Connect the headset to the device.
F. Headset is ready for use now.

Once paired and connected, the headset will be automatically connected to the device whenever you
turn the headset on again, provided the device is in the range.

We found most of the online technical support questions are caused by improper pairing between the
headset and the Bluetooth device. Please follow the instruction step-by-step.

5.2 Basic Operations:

Answering a call: press the “MFB” button once to answer the call.

Ending a call: press the “MFB” button to end a call.

Reject a call: When a call coming, after you hear “Doo_” twice, press and hold the “MFB” button 2

seconds, you will hear a “Di_” tone, then the call is rejected (some mobile phone does not support
this function)
Voice Dial: If your mobile phone has voice dialing enabled, when in standby mode, short press the
“MFB”, you will hear a “Di_” voice, then say the name you wish to call.

Last number redialing: In standby mode, press and hold the “MFB” button for 2 seconds until you
hear a “Di_” tone

Hold a call: During a conversation, press and hold the MFB button for 2 seconds until you hear a

“Di_” tone, press and hold the MFB button for 2 seconds again to resume the conversation.

Volume Up: press “V+” button
Volume Down: press “V-” button

6. Working with PC/ Laptop

With PC running Microsoft system with Built-in Bluetooth

6.1 Pairing procedure

A. Ensure your PC with built-in Bluetooth. Turn On the Bluetooth of PC
B. Double click Bluetooth icon, click “Add a new device”
C. Once found “Avantree AH5’’, follow the steps and enter pin code 0000 to pair;
D. Connect the headset to the device.
E. Headset is ready for use now.

6.2 For Skype Call

 Some PC system can change the sound setting automatically, then you can make Skype call right

now.

 Some PC system needs change the sound setting first, go to Skype Tools – Options- Sound Devices,

select “Audio in” / “Audio Out”/Ringing all three modes to “Bluetooth AV Audio”, save it. Then you

can make Skype call

 For Some PC system, please enter into “Control panel-Audio and Video Device-Audio and Video

Device Property-Audio”. Setup the “play” and “record” as ”Bluetooth AV/HS Audio” and then
setup the Audio In and Audio Out of Voice Setting as “Bluetooth AV/HS Audio”

7. Product Specification

 Bluetooth V3.0+EDR
 Bluetooth Class 2, 10 meters (extended)
 Talk time: up to 6 hrs
 Standby time: up to 270 hours
 Battery: DC 5.0V, 300mAh
 Charge time: 2.5 hours
 Frequency Table:2.4026Ghz-2.480Ghz
 Headset size: 154.7*140*50mm
 Weight: 41.2g

The talk and standby times may vary when used with different mobile phones or other compatible
Bluetooth devices, usage settings, usage styles and environments.

8. Safety Information

 To avoid any damage or malfunction of the device do not drop device from high places.
 Keep device away form humidity, water and any other liquid. If the device is exposed to water,