Avanti WCB52T3S, BVB52T4S INSTRUCTION MANUAL

INSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS


WCB52T3S	BVB52T4S

Single Zone Wine Chiller	Beverage Cooler
Vinera de una zona	Enfriador de bebidas
Cellier de une zone	Refroidisseur de breuvages

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.

Avanti Products has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice.

Avanti Products LLC

P.O. Box 520604 - Miami, Florida 33152

www.avantiproducts.com

TABLE OF CONTENTS
Appliance Safety	3
Important Safeguides	4
Help Us Help You …	5
Parts and Features	6 - 7
Important Safety Instructions	8
Installation Instructions	8
Before Using Your Appliance	8
Installation of Your Appliance	8
Built-In Cabinet Instructions	8
Electrical Connection / Extension Cord / Surge Protector	9
Installing Stainless Steel Handle	10
Operating Your Appliance
ON/OFF Power	11 - 12
Setting the Temperature Control
Common Features For All Models	13
	13
Storage
Cleaning Your Appliance	14
Power Failure	14
Moving Your Appliance	14
Energy Saving Tips	14
Troubleshooting Guide	15
Service for Your Appliance	16
Wiring Diagram	16
Your Avanti Products Warranty	17
Instrucciones en Español	18 - 21
Instructions en Français	22 - 37
Registration Information and Registration Card	Last Page

APPLIANCE SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the Safety Alert Symbol. This symbol alerts you to potential hazards

can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words “DANGER”, “WARNING” or “CAUTION”.

Danger means that failure to heed this safety statement may result in severe personal injury or death.

Warning means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.

Caution means that failure to heed this safety statement may result in minor or moderate personal injury, or property or equipment damage.

All safety messages will alert you do what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.

PROP. 65 WARNING FOR CALIFORNIA RESIDENTS

WARNING:

Cancer And Reproductive Harm

www.p65warnings.ca.gov

REFRIGERANT GAS WARNINGS

FLAMMABLE REFRIGERANT GAS

DANGER - Risk of fire or explosion. Flammable refrigerant used.

DO NOT use mechanical devices to defrost refrigerator. DO NOT puncture refrigerant tubing.

DANGER - Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained service personnel. DO NOT puncture refrigerant tubing.

CAUTION - Risk of fire or explosion. Flammable refrigerant used. Consult repair manual / owner’s guide before attempting to service this product. All safety precautions must be followed. CAUTION - Risk of fire or explosion. Dispose of property in accordance with federal or local regulations. Flammable refrigerant used.

CAUTION - Risk of fire or explosion due to puncture of refrigerant tubing. Follow handling instructions carefully. Flammable refrigerant used.

CAUTION - To prevent a child from being entrapped, keep out of reach of children and not in the vicinity of the cooler.

CAUTION – Flammable refrigerant used! When handling, moving and use of the refrigerator, make sure to avoid either damaging the refrigerant tubing, or increasing the risk of a leak.

IMPORTANT SAFEGUIDES

Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following:

·Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord.

·Replace all panels before operating.

·It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.

·Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

·Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.

·Do not connect or disconnect the electric plug when your hands are wet.

·Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.

·Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this material. All other servicing should be referred to a qualified technician.

·Risk of child entrapment. Before you throw away your old refrigerator or freezer:

·* Take off the doors.

·* Leave the shelves in place so that children may not easily climb inside

FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

·Use two or more people to move and install appliance. Failure to do so can result in back or other injury.

·To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain, water spray or drips.

·The appliance should not be located next to ovens, grills or other sources of high heat.

·The appliance must be installed with all electrical connections in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances is required.

·Do not kink or pinch the power supply cord of appliance.

·The fuse (or circuit breaker) size should be 15 amperes.

·It is important for the appliance to be leveled in order to work properly. You may need to make several adjustments to level it.

·Never allow children to operate, play with or crawl inside the appliance.

·Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may damage or discolor the interior.

·Do not use this apparatus for other than its intended purpose.

·Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

·Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

·Do not damage the refrigerant circuit.

·If the SUPPLY CORD is damaged, it must be replaced by the manufacturer, its service agent or

·similarly qualified persons in order to avoid a hazard.

HELP US HELP YOU…

Read this guide carefully.

It is intended to help you operate and maintain your new appliance properly.

Keep it handy to answer your questions. If you don't understand something or you need more assistance, please call:

Avanti Customer Service 800-220-5570

Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.

CAUTION:

THIS APPLIANCE IS NOT

DESIGNED FOR THE STORAGE OF MEDICINE OR OTHER MEDICAL PRODUCTS.

Write down the model and serial numbers.

You'll find them on a plate located on the rear outside wall of the appliance.

Please write these numbers here:

____________________________________

Date of Purchase

____________________________________

Model Number

____________________________________

Serial Number

Use these numbers in any correspondence or service calls concerning your appliance.

If you received a damaged appliance, immediately contact the dealer (or builder) that sold you the appliance.

Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.

IF YOU NEED SERVICE

We're proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are some steps to follow for further assistance.

FIRST, contact the people who serviced your appliance. Explain why you are not pleased. In most cases, this will solve the problem.

NEXT, if you are still not pleased, write all the details, including your telephone number, and send it to:

Customer Service

Avanti Products

10880 NW 30 Street

Miami, FL 33172 USA

Avanti WCB52T3S, BVB52T4S INSTRUCTION MANUAL

PARTS & FEATURES

MODEL: WCB52T3S

1Top Hinge

2Temperature Control

3Shelves (5)

4Glass Door with Stainless Steel Frame and Handle

5Front Grille

6Leveling Legs

7Bottom Hinge

PARTS & FEATURES

MODEL: BVB52T4S

1Top Hinge

2Temperature Control

3Shelves (4)

4Glass Door with Stainless Steel Frame and Handle

5Front Grille

6Leveling Legs

7Bottom Hinge

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electrical shock,

~WARNING~ or injury when using your appliance, follow these basic precautions:

·Read all instructions before using the appliance.

·DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

·Before you throw away your old appliance: Take off the door. Leave the shelves in place so that children may not easily climb inside.

·Never allow children to operate, play with, or crawl inside the appliance.

·Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.

·Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

-Save these instructions-

INSTALLATION INSTRUCTIONS

Before using your appliance

-Remove the exterior and interior packing.

-Check to be sure you have all of the following parts:

Model WCB52T3S	Model BVB52T4S
Shelves ( 5 )	Shelves ( 4 )
Stainless Steel Handle	Stainless Steel Handle
Instruction Manual	Instruction Manual

-Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

-Clean the interior surface with lukewarm water using a soft cloth.

-Install the handle on the left side of the door.

Installation of your appliance

-This appliance is designed to be for free standing installation or built-in (fully recessed).

-Place your appliance on a floor that is strong enough to support it when it is fully loaded. To level your appliance, adjust the front levelling legs at the bottom of the appliance.

-Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.

-Avoid locating the unit in moist areas.

-Plug the appliance into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

Built-in cabinet instructions

This unit is designed for either built-in or free standing installation. If you plan to use this unit in a built-in application please follow the requirements shown to the right.

Cabinet Opening Dimensions

	Inches	Centimeters

Width	24	61
Depth	24	61
Height	35	89

Electrical connection

~Warning~: Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti service center.

This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock.

Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded.

This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.

The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.

Extension cord

Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

Power bar with surge protection

Most electrical appliances use a series of electric control boards to operate. These boards are very susceptible to power surges and could be damaged or destroyed.

If the appliance is going to be used in an area or if your city / country is prone to power surges / outages; it is suggested that you use a power surge protector for all electrical devices / appliances you use. The surge protector that you select must have a surge block high enough to protect the appliance it is connected to. If you have any questions regarding the type and size of surge protector needed contact a licensed electrician in your area.

Damages due to power surges are not considered a manufacturer covered defect and will void your product warranty.

Installing the stainless steel handle

This appliance includes a stainless-steel handle. To install the handle please follow the below instructions:

1.Pull away the door gasket in the area where the handle is to be installed on the left side as shown below in Illustration # 1. The gasket is easily displaced by hand, no tools are necessary.

2.Align the handle with the screws installed. Tighten the screws using a Phillips head screwdriver until the handle sets both flush and secured tightly against the door frame. (DO NOT over tighten as this will cause damage to the handle assembly).

3.Replace the door gasket to its original position.

4.If you choose not to use the handle supplied, simply follow step 1 to access the installation screws and remove them and then place the two decorative plugs into the two holes separately. Continue on to step 3 to replace the door gasket to its original position.

Illustration # 1			Illustration # 2
1.	Gasket	3.	Phillips Head Screw Driver
2.	Phillips Head Screw	4.	Handle

OPERATING YOUR APPLIANCE

MODEL: WCB52T3S

It is recommended you install the appliance in a place where the ambient temperature is between 19ºC-24ºC (66ºF-75ºF). If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot

conditions may cause interior temperatures to fluctuate. The range of 5ºC-18ºC (40ºF-65ºF) may not be reached.

Unit Temperature Range:

40º F – 65º F

5º C - 18º C

Recommended temperature settings

Wine conservation:	50° F - 57º F	10°	C - 14º C
Rose and Sparkling Wines:	40° F - 46º F	5°	C - 8º C
Dry / White Wines:	48° F - 54º F	9° C - 12º C
Red Wines:	57° F - 65º F	14° C - 18º C

Setting the temperature control

You can select temperature display setting from Fahrenheit to Celsius degree by touching the button. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display window.

If you desire to change the temperature, set the temperature as you desire by touching the or button. The numbers in the display window will flash. The temperature that you desire to set will increase 1ºF or 1ºC if you touch the button once; on the contrary the temperature will decrease 1ºF or 1ºC if you touch the button once.

When you store mostly red wines, the temperature which you control by touching the above two buttons need to be set at 15ºC-18ºC (59ºC-65ºF).

When you store mostly white wines, the temperature needs to be set at 10ºC-14ºC (50ºF-57ºF) When you store mostly sparkling wines, the temperature needs to be set at 5ºC-8ºC (40ºF-46ºF) The temperature inside the unit will be appeared in blue color in the display window.

NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the appliance will not start.

When you use the appliance for the first time or restart the appliance after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the appliance is running for a few hours everything will be back to normal.

OPERATING YOUR BEVERAGE COOLER

MODEL: BVB52T4S

It is recommended you install the beverage cooler in a place where the ambient temperature is between 19ºC-24ºC (66ºF-75ºF). If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme

cold or hot conditions may cause interior temperatures to fluctuate. The range of 3ºC-18ºC (37ºF65ºF) may not be reached.

Unit Temperature Range:

37º F – 65º F

3º C - 18º C

Setting the temperature control

NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the beverage cooler will not start.

When you use the beverage cooler for the first time or restart the beverage cooler after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the beverage cooler is running for a few hours everything will be back to normal.

+ 26 hidden pages