Avanti SBCA017G User Manual
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
La sección en español empieza en la página 13.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications
without notice.
Beverage Center / Enfriador de Bebidas
Model Numbers
Nos. de Modelos:
Color: Black / Negro
Avanti Products, A Division of the Mackle Co., Inc.
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com
SBCA017G
SBCA017GL
1
2 3
TABLE OF CONTENTS
Beverage Cooler Safety 4
Important Safeguides 5
Parts and Features 6
Important Safety Instructions 7
Installation Instructions 7
Before Using Your Beverage Cooler 7
Installation of Your Beverage Cooler 7
Electric al Connection 8
Operating Your Beverage Cooler 9
Temperature Control 9
Interior Light 9
Care and Maintenance 9
Defrosting Your Beverage Cooler 9
Cleaning Your Beverage Cooler 9
Power Failure 10
Vacation Time 10
Moving Your Beverage Cooler 10
Energy Saving Tips 10
Troubleshooting Guide 10
Service for Your Beverage Center 11
Your Avanti Products Warranty 12
Instrucciones en Español 13 - 14
Registration Inform a t i o n / Re g i stration Car d 15
BEVERAGE COOLER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual for your appliance. Always read
and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that
can kill or injure you and others. All safety messages will follow the Safety
Alert Symbol and either the words ” DANGER”, “WARNING” or “CAUTION”.
Danger means that failure to heed this
safety statement may result in severe
personal injury or death.
Warning means that failure to heed this
safety statement may result in extensive
product damage, serious personal injury, or
death.
Caution means that failure to heed this
safety statement may result in minor or
moderate personal injury, property or
equipment damage.
All safety messages will alert to know what potential hazard is, tell you how to reduce the chance of
injury, and let you know what can happen if the ins tructions are not followed.
4
IMPORTANT SAFEGUIDES
Before the Beverage Cooler is used, it must be properly positioned and installed as
described in this manual,so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the Beverage Cooler, follow basic precaution,
including the following:
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and
do not use an extension cord.
It is recommended that a separate circuit, serving only your Beverage Cooler be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
Never clean Beverage Cooler parts with flammable fluids. These fumes can create a fire hazard
or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity
of this or any other appliance. The fumes can create a fire hazard or explosion.
Before proceeding with cleaning and maintenance operations, make sure the power line of t he
unit is disconnected.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the Beverage Cooler or disconnect power before cleaning or servicing. Failure to do so
can result in electrical shock or death.
Do not attempt to repair or replace any part of your Beverage Cooler unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE T O YOUR MODEL
Use two or more people to move and install Beverage Cooler. Failure to do so can result in back
or other inj ur y.
To ensure proper ventilation for your Beverage Cooler, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below
90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain,
water spray or drips.
The Beverage Cooler should not be located next to ovens, grills or other sources of high heat.
The Beverage Cooler must be installed with all electrical connections in accordance with state
and local codes. A standard electrical supply (115 V AC only, 60 Hz ), properly grounded in
accordance with the National Electrical Code and local codes and ordinances is required.
Do not kink or pinch the power supply cord of Beverage Cooler.
The fuse (or circuit breaker) s i ze should be 2.5 am peres.
It is important for the Beverage Cooler to be leveled in order to work properly. You may need to
make several adjustments to level it.
Never allow children to operate, play with or crawl inside the Beverage Cooler.
Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may
damage or discolor the interior.
Do not use this apparatus for other than its intended purpose.
5
Loading...