Avanti RH24P0W User Manual

Range Hood

Model Numbers / Nos. de Modelos:

RH24P0W

RH24P3S

INSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. AND SAVE FOR LOCAL GAS AND ELECTRICAL INSPECTOR’S USE.

Avanti Products has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice.

Avanti Products LLC

P.O. Box 520604 - Miami, Florida 33152

www.avantiproducts.com

Range Hood Safety

Important Safe guides

Help Us Help You …

Parts and Features

Electrical Requirements

Before Using Your R ang e Hood

Operating Your Range Hood

Important Precautions and Recommendations

Installation - Product Specifications

Installation- Electrical and Ducting

13 - 16

Care and Maintenance

Troubleshooting Guide

Service for Your Range Hood

Your AVANTI Products Warranty

Avanti Registration Card

Installation - Mounting

TABLE OF CONTEN TS

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. A l wa ys read and obey all safety messages.

All safety messages will alert you what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.

WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS OBSERVE THE FOLLOWING:

a) Use this unit only in the manner intended and expressed by the manufacturer, if you have any

questions, contact the manufacturer.

b) Before servicing or cleaning the unit, switch the power off at service panel and lock panel to

prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, like a tag to the service panel.

CAUTION

For general ventilating use only. Do not exhaust hazardous or explosive materials and vapors. Take care when using cleaning agents or detergents. Suitable for use in household/residential cooking areas only.

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

a) Installation work and electrical wiring must be done by qualified person(s) in accordance with

all applicable codes and standards including fire-rated construction.

b) Sufficient air is needed for power combustion and exhausting of gases through the flue

(chimney) of fuel burning equipment to prevent back-drafting. Follow the heating equ ipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA) and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

c) When cutting or drilling into a wall or ceiling, do not damage electrical wiring and other hidden

utilities. d) Ducted fans must always vent to the outdoors. e) Make sure the power is OFF before installing, wiring or maintenance.

IMPORTANT SAFE GUIDES

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.

Before the appliance is used, it must be properly positioned and installed as

described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following:

• It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.

• Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in t he vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

• Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.

• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.

• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

• All openings in the wall behind the appliance and in the floor under the appliance shall be sealed.

• Keep appliance area clear and free from combustible materials, gasoline, and other flammable

vapors.

• Do not obstruct the flow of ventilation air.

• Disconnect the electrical supply to the appliance before servicing.

• When removing appliance for cleaning and/or service:

• Disconnect AC power supply.

• Electrical Grounding Instructions - The appliance must be installed and grounded by a qualified

technician in accordance with the National Electrical Code ANSI/NFPA No. 70 (Latest Edition) and local electrical code requirements.

• Replacement Parts – Only authorized replacement parts may be used in performing service on

the range hood. Replacement parts are available from factory authorized parts distributors. Contact the nearest Avanti service ce nter in your area.

HELP US HELP YOU...

Read this guide carefully.

It is intended to help you operate and maintain your new appliance properly.

Keep it handy to answer your questions. If you don't understand something or you need more assistance, please call:

Avanti Customer Service 800-220-5570

Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.

Write down the model and serial numbers.

You'll find them on a plate located on the appliance.

Please write these numbers here:

____________________________________ Date of Purchase

____________________________________ Model Number

____________________________________ Serial Number

Use these numbers in any correspondence or service calls concerning your appliance.

If you received a damaged appliance, immediately contact t he de aler (or bu ilder) that sold you the appliance.

Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.

IF YOU NEED SERVICE

We're proud of our ser vice and want you to be pleased. If for som e reason you are not happ y with the service you receive, here are some steps to follow for further assistance. FIRST, contact the p eople who serviced your applaince. Explain why you are not pleased. In most cases, this will solve the problem.

NEXT, if you are still not p l eas ed, wr ite all the details, including your telephone number, and send it to:

Customer Serv ice

Avanti Products 10880 NW 30 Street Miami, FL 33172

PARTS & FEATURES

Control Panel

LED Light Bulbs (2)

Removable / Cleanable Mesh Air Filters (2)

Power ON/OFF Button (Red indicator Light)

Fan Speed Selector Button (Blue indicator light)

Fan Speeds: OFF / High / Medium / Low

Light ON / OFF Selector Button (Blue indicator light)

Light modes: OFF / High / Low

CONTROL PANEL

ELECTRICAL REQUIREMENTS

WARNING

All electrical work must be performed by a qualified electrician or person with similar technical knowhow and background.

For personal safety, remove house electrical fuse or open circuit breaker before beginning installation. DO NOT USE EXTE NSION CORD OR ADAPTER PLUG WITH THIS APPLIANCE.

Follow all national electrical codes or prevailing local codes and ordinances.

Electrical supply: This appliance requires a 120V / 60 Hz electrical supply, connected to an

individual properly grounded branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse. Wiring must be a 2 wire with ground. Please refer to the electrical diagram labeled on the product.

IMPORTANT: You MUST observe all governing codes and ordinances. It is the customer’s responsibility

A) To contact a qualified electrical installer B) To assure that the electrical installation is adequate and in conformance with

the National Electrical Code, ANSI/NFPA 70 latest edition* or CSA standards C22.1-94, Canadian Electrical Code part 1 and C22.2 No. 0-M91 – latest edition** and all local codes and ordinances.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

DO NOT ground to a gas pipe. Check with a qualified electrician if you are not sure the range hood is properly

grounded. DO NOT have a fuse in the neutral or ground circuit. *National Fire Protection Association Batterymarch Park, Quincy, MA 02269

** CSA International 8501 East Pleasant Valley Road, Cleveland, OH 44131

CABLE LOCK:

A cable locking connector (not supplied) might also be required by local codes. Check with local requirements and codes, purchase and install appropriate connector if necessary.

+ 14 hidden pages