ICE MAKER/MAQUINA DE HACER HIELO
INSTRUCTION MANUAL/MANUAL DE INSTRUCCIONES
MODEL NUMBER/ NUMERO DE MODELO: IM20SS
CAUTION:
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
LA SECCION EN ESPAÑOL EMPIEZA EN LA P AGINA 14.
AVANTI HAS A POLICY OF CONTINUOUS IMPROVEMENT ON ITS PRODUCTS AND RESERVES THE RIGHT TO CHANGE MATERIALS AND
SPECIFICATIONS WITHOUT NOTICE.
AVANTI PRODUCTS, A DIVISION OF THE MACKLE CO., INC.
P.O. BOX 520604 - MIAMI, FLORIDA 33152
WWW.AVANTIPRODUCTS.COM
2
REGISTRATION INFORMATION
THANK YOU FOR PURCHASING THIS FINE AVANTI PRODUCT. PLEASE FILL OUT THIS CARD
AND RETURN IT WITHIN 100 DAYS OF PURCHASE TO RECEIVE THESE
IMPORTANT BENEFITS:
? PROTECT YOUR PRODUCT:
WE WILL KEEP THE MODEL NUMBER AND DATE OF PURCHASE OF YOUR NEW AVANTI
PRODUCT ON FILE TO HELP YOU REFER TO THIS INFORMATION IN THE EVENT OF AN
INSURANCE CLAIM SUCH AS FIRE OR THEFT.
? PROMOTE BETTER PRODUCTS:
WE VALUE YOUR INPUT. YOUR RESPONSES WILL HELP US DEVELOP PRODUCTS
DESIGNED TO BEST MEET YOUR FUTURE NEEDS.
------------------------------------------ -----------(DETACH HERE)--------------------------------------------------------
AVANTI REGISTRATION CARD
__________________________________ _____________________________________
NAME MODEL # SERIAL #
__________________________________ _____________________________________
ADDRESS DATE PURCHASED STORE/DEALER NAME
__________________________________ ______________________________________
CITY STATE ZIP OCCUPATION
__________________________________ AS YOUR PRIMARY RESIDENCE, DO YOU:
AREA CODE PHONE NUMBER ?OWN ?RENT
DID YOU PURCHASE AN ADDITIONAL WARRANTY: YOUR AGE:
?EXTENDED ?NONE ?UNDER 18 ?18-25 ?26-30
REASON FOR CHOOSING THIS AVANTI PRODUCT: ?31-35 ?36-50 ?OVER 50
PLEASE INDICATE THE MOST IMPORTANT FACTORS MARITAL STATUS:
THAT INFLUENCED YOUR DECISION TO PURCHASE ?MARRIED ?SINGLE
THIS PRODUCT. IS THIS PRODUCT USED IN THE:
?PRICE ?HOME ?BUSINESS
?PRODUCT FEATURES HOW DID YOU LEARN ABOUT THIS PRODUCT:
?AVANTI REPUTATION ?ADVERTISING
?PRODUCT QUALITY ?IN STORE DEMO ?PERSONAL DEMO
?SALESPERSON RECOMMENDATION ?OTHER______________________________
?FRIEND/RELATIVE RECOMMENDATION COMMENTS____________________________
?WARRANTY _____________________________________
?OTHER_______________________ _____________________________________
3
4
HELP US HELP YOU
READ THIS GUIDE CAREFULLY.
IT IS INTENDED TO HELP YOU OPERATE
AND MAINTAIN YOUR NEW ICE MAKER
PROPERLY.
KEEP IT HANDY TO ANSWER YOUR
QUESTIONS.
IF YOU DON'T UNDERSTAND SOMETHING
OR YOU NEED MORE HELP, PLEASE CALL:
AVANTI CUSTOMER SERVICE
800-220-5570
KEEP PROOF OF ORIGINAL PURCHASE
DATE (SUCH AS YOUR SALES SLIP) WITH
THIS GUIDE TO ESTABLISH THE
WARRANTY PERIOD.
CAUTION :
THIS ICE MAKER IS NOT
DESIGNED FOR THE STORAGE
OF MEDICINE OR OTHER
MEDICAL PRODUCTS.
IF YOU NEED SERVICE
WE'RE PROUD OF OUR SERVICE AND
WANT YOU TO BE PLEASED. IF FOR SOME
REASON YOU ARE NOT HAPPY WITH THE
SERVICE YOU RECEIVE, HERE ARE SOME
STEPS TO FOLLOW FOR FURTHER HELP.
FIRST, CONTACT THE PEOPLE WHO
SERVICED YOUR ICE MAKER. EXPLAIN
WHY YOU ARE NOT PLEASED. IN MOST
CASES, THIS WILL SOLVE THE PROBLEM.
WRITE DOWN THE MODEL AND SERIAL
NUMBERS.
YOU'LL FIND THEM ON A PLATE LOCATED
ON THE REAR WALL OF THE ICE MAKER.
PLEASE WRITE THESE NUMBERS HERE:
____________________________________
DATE OF PURCHASE
____________________________________
MODEL NUMBER
____________________________________
SERIAL NUMBER
USE THESE NUMBERS IN ANY
CORRESPONDENCE OR SERVICE CALLS
CONCERNING YOUR ICE MAKER.
IF YOU RECEIVED A DAMAGED ICE MAKER,
IMMEDIATELY CONTACT THE DEALER (OR
BUILDER) THAT SOLD YOU THE ICE MAKER.
SAVE TIME AND MONEY. BEFORE YOU
CALL FOR SERVICE, CHECK THE
TROUBLESHOOTING GUIDE. IT LISTS
CAUSES OF MINOR OPERATING
PROBLEMS THAT YOU CAN CORRECT
YOURSELF.
NEXT, IF YOU ARE STILL NOT PLEASED,
WRITE ALL THE DETAILS, INCLUDING YOUR
TELEPHONE NUMBER, AND SEND IT TO:
CUSTOMER SERVICE
AVANTI PRODUCTS
10880 NW 30
MIAMI, FL 33172
TH
STREET
PARTS AND FEATURES
1. ICE BOX
2. FIXED LEG
3. SWITCH
4. DOOR
5
TABLE OF CONTENTS
REGISTRATION INFORMATION ________________________________________________________2
HELP US HELP YOU __________________________________________________________________3
PARTS AND FEATURES ________________________________ ______________________________4
IMPORTANT SAFETY INSTRUCTIONS __________________________________________________6
INSTALLATION INSTRUCTIONS _______________________________________________________6
BEFORE USING YOUR ICE MAKER_____________________________________________________6
INSTALLATION OF YOUR ICE MAKER __________________________________________________6
ELECTRICAL CONNECTION ___________________________________________________________7
INITIAL START-UP OPERATION ________________________________________________________8
REVERSING THE DOOR SWING OF YOUR ICE MAKER________________________________ ___8
CARE AND MAINTENANCE____________________________________________________________8
CLEANING YOUR ICE MAKER _________________________________________________________8
POWER FAILURE ____________________________________________________________________9
VACATION TIME/STORAGE ________________________________ ___________________________9
MOVING YOUR ICE MAKER ________________________________ ___________________________9
ENERGY SAVING TIPS________________________________________________________________9
TROUBLESHOOTING GUIDE _________________________________________________________10
SERVICE FOR YOUR ICE MAKER ________________________________ _____________________11
YOUR AVANTI PRODUCTS WARRANTY ________________________________ _______________12
INSTRUCCIONES EN ESPAÑOL____________________________________________________ 14-18
6
IMPORTANT SAFETY INSTRUCTIONS
? WARNING?
? READ ALL INSTRUCTIONS BEFORE USING THE ICE MAKER.
? DANGER OR WARNING: RISK OF CHILD ENTRAPMENT.
? CHILD ENTRAPMENT AND SUFFOCATION ARE NOT PROBLEMS OF THE PAST. JUNKED
OR ABANDONED APPLIANCES ARE STILL DANGEROUS. . . EVEN IF THEY WILL “JUST
SIT IN THE GARAGE A FEW DAYS.”
? BEFORE YOU THROW AWAY YOUR ICE MAKER: TAKE OFF THE DOORS. LEAVE THE
SHELVES IN PLACE SO THAT CHILDREN MAY NOT EASILY CLIMB INSIDE.
? NEVER ALLOW CHILDREN TO OPERATE, PLAY WITH, OR CRAWL INSIDE THE
APPLIANCE.
? NEVER CLEAN ICE MAKER PARTS WITH FLAMMABLE FLUIDS. THE FUMES CAN
CREATE A FIRE HAZARD OR EXPLOSION.
? DO NOT STORE OR USE GASOLINE OR ANY OTHER FLAMMABLE VAPORS AND LIQUIDS
IN THE VICINITY OF THIS OR ANY OTHER ICE MAKER. THE FUMES CAN CREATE A FIRE
HAZARD OR EXPLOSION.
-SAVE THESE INSTRUCTIONS-
TO REDUCE THE RISK OF FIRE,
ELECTRICAL SHOCK, OR INJURY WHEN
USING YOUR ICE MAKER, FOLLOW THESE
BASIC PRECAUTIONS:
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR ICE MAKER
? REMOVE THE EXTERIOR AND INTERIOR PACKING.
? CHECK TO BE SURE YOU HAVE ALL OF THE FOLLOWING PARTS:
1 ICE BUCKET
1 PLASTIC SCOOP
25 FT. HOSE
1 INSTRUCTION MANUAL
? BEFORE CONNECTING THE ICE MAKER TO THE POWER SOURCE, LET IT STAND UPRIGHT
FOR APPROXIMATELY 2 HOURS. THIS WILL REDUCE THE POSSIBILITY OF A MALFUNCTION
IN THE COOLING SYSTEM FROM HANDLING DURING TRANSPORTATION.
? CLEAN THE INTERIOR SURFACE WITH LUKEWARM WATER USING A SOFT CLOTH.
INSTALLATION OF YOUR ICE MAKER
? THIS APPLIANCE IS DESIGNED TO BE RECESSED OR BUILT-IN (FULLY RECESSED).
? PLACE YOUR ICE MAKER ON A FLOOR THAT IS STRONG ENOUGH TO SUPPORT THE ICE
MAKER WHEN IT IS FULLY LOADED. REMEMBER THAT THE UNIT WILL BE SIGNIFICANTLY
HEAVIER ONCE IT IS FULLY LOADED. TO LEVEL YOUR ICE MAKER, ADJUST THE LEGS AT
THE FRONT OF THE ICE MAKER.
? LOCATE THE ICE MAKER AWAY FROM DIRECT SUNLIGHT AND SOURCES OF HEAT (STOVE,
HEATER, RADIATOR, ETC.). DIRECT SUNLIGHT MAY AFFECT THE ACRYLIC COATING AND
HEAT SOURCES MAY INCREASE ELECTRICAL CONSUMPTION. EXTREME COLD AMBIENT
TEMPERATURES MAY ALSO CAUSE THE ICE MAKER NOT TO PERFORM PROPERLY.
? AVOID LOCATING THE ICE MAKER IN MOIST AREAS. TOO MUCH MOISTURE IN THE AIR WILL
CAUSE FROST TO FORM QUICKLY ON THE EVAPORATOR REQUIRING MORE FREQUENT
DEFROSTING OF THE ICE MAKER.
? PLUG THE ICE MAKER INTO AN EXCLUSIVE PROPERLY INSTALLED-GROUNDED WALL
OUTLET. DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD (GROUND)
7
PRONG FROM THE POWER CORD. ANY QUESTIONS CONCERNING POWER AND OR
?
?
REVIEW STATE AND LOCAL PLUMBING CODES BEFORE INSTALLA
T
ION
GROUNDING SHOULD BE DIRECTED TOWARD A CERTIFIED ELECTRICIAN OR AN
AUTHORIZED AVANTI PRODUCTS SERVICE CENTER.
ELECTRICAL CONNECTION
IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL
SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED
AVANTI PRODUCTS SERVICE CENTER.
WARNING?
? THIS ICE MAKER SHOULD BE PROPERLY GROUNDED FOR YOUR SAFETY. THE POWER
CORD OF THIS ICE MAKER IS EQUIPPED WITH A THREE-PRONG PLUG WHICH MATES WITH
STANDARD THREE PRONG WALL OUTLETS TO MINIMIZE THE POSSIBILITY OF ELECTRICAL
SHOCK.
? DO NOT UNDER ANY CIRCUMSTANCES CUT OR R EMOVE THE THIRD GROUND PRONG
FROM THE POWER CORD SUPPLIED.
? NEVER USE AN EXTENSION CORD TO CONNECT POWER TO THE UNIT.
? NEVER USE A TWO-PRONG GROUNDING ADAPTER.
? WHERE A TWO-PRONG WALL RECEPTACLE IS ENCOUNTERED, CONTACT A QUALIFIED
ELECTRICIAN TO HAVE IT REPLACED WITH A 3-PRONG RECEPTACLE IN ACCORDANCE
WITH APPLICABLE ELECTRICAL CODES.
? THIS ICE MAKER REQUIRES A STANDARD 115/120 VOLTS A.C.~/60HZ ELECTRICAL OUTLET
WITH THREE-PRONG GROUND.
? THE CORD SHOULD BE SECURED BEHIND THE ICE MAKER AND NOT LEFT EXPOSED OR
DANGLING TO PREVENT ACCIDENTAL INJURY.
1. CONNECTING THE WATER SUPPLY
? ALL THE NECESSARY HARDWARE IS NOT PROVIDED FOR INSTALLATION SO IT IS
NECESSARY TO HIRE A PROFESSIONAL LICENSED PLUMBER TO COMPLETE THE
INSTALLATION.
? CONNECT TUBING (SUPPLIED WITH UNIT) TO THE NEAREST COLD WATER SOURCE.
CONNECT SUFFICIENT TUBING TO THE UNIT TO ALLOW THE APPLIANCE TO BE MOVED
FREELY FOR CLEANING AND SERVICE. ALSO MAKE SURE THAT THE TUBING IS NOT
PINCHED OR DAMAGED DURING TRANSPORTATION.
? POSITION UNIT TO ALLOW FREE AIRFLOW THROUGH THE FRONT GRILL (SEE SKETCH 1).
WIPE OUT INSIDE OF UNIT AND ICE BUCKET WITH A DAMP CLOTH.
IMPROPER WATER LINE CONNECTION MAY RESULT IN FLOODING
YOU MUST USE A LICENSED PLUMBER
WARNING?
SKETCH 1
8
INITIAL START-UP OPERATION
1. PLUG THE APPLIANCE INTO A 115/120V POLARIZED AND GROUNDED WALL ELECTRICAL
OUTLET.
2. PLACE THE ON-OFF SWITCH IN THE “ON” POSITION.
3. MAKE SURE THE WATER SUPPLY IS ON. AS SOON AS THE INNER MECHANISM REACHES
THE PROPER TEMPERATURE, THE ICEMAKER MECHANISM WILL FILL THE MOLD WITH
WATER.
4. THE FIRST CUBES MAY BE SMALL BECAUSE OF AIR IN THE WATER LINE. LATER CUBES
WILL BE OF STANDARD CRESCENT MOON TYPE SIZE.
5. APPROXIMATE TIME FOR THE FIRST CYCLE IS BETWEEN 30-40 MINUTES.
6. EACH CYCLE APPROXIMATELY WILL TAKE 140 ML OF WATER SO YOU SHOULD HAVE A
FULL TRAY, AFTER 11 HOURS.
IMPORTANT: THROW AWAY ALL ICE CUBES MADE DURING THE FIRST 3 HOURS OF
OPERATION.
? WHEN THE ICE BUCKET IS FULL, THE ICE MAKING MECHANISM WILL
AUTOMATICALLY SHUT OFF. HOWEVER THE SYSTEM WILL CONTINUE TO
COOL AND MAINTAIN THE CUBES SUPPLY.
? ICE DELIVERY MAY BE INTERRUPTED BY RAISING THE METAL ARM INTO
AN UPRIGHT POSITION (SEE SKETCH 2)
? IF THE ICEMAKER IS NOT USED REGULARLY, IT IS RECOMMENDED THAT
THE ICE BUCKET BE EMPTIED PERIODICALLY TO INSURE FRESH ICE.
? SOMETIMES THE CUBES MAY APPEAR CLOUDY. THIS IS CAUSE OF NO CONCERN AND HAS
NOTHING TO DO WITH THE TASTE OR CHEMICAL MAKE-UP OF THE WATER.
? THE FRONT GRILL SHOULD BE KEPT FREE OF DUST AND LINT TO PERMIT FREE AIRFLOW.
? THIS UNIT SHOULD BE DEFROSTED APPROXIMATELY EVERY 4-6 WEEKS OR WHEN FROST
ON THE ICE MAKER WALLS IS EXCESSIVE OR ¼” THICK. TO DEFROST, TURN THE UNIT OFF,
REMOVE CUBES AND KEEP DOOR OPEN AT LEAST TWO INCHES.
REVERSING THE DOOR SWING OF YOUR ICE MAKER
THIS APPLIANCE HAS THE CAPABILITY OF THE DOOR OPENING FROM EITHER THE LEFT OR
RIGHT SIDE. THE UNIT IS DELIVERED TO YOU WITH THE DOOR OPENING FROM THE LEFT
SIDE. SHOULD YOU DESIRE TO REVERSE THE OPENING DIRECTION, PLEASE CALL
CUSTOMER SERVICE FOR REVERSAL INSTRUCTIONS
SKETCH 2
CARE AND MAINTENANCE
CLEANING YOUR ICE MAKER
? TURN THE SWITCH CONTROL TO "OFF", UNPLUG THE ICE MAKER AND REMOVE BUCKET.
? WASH THE INSIDE WITH A WARM WATER AND BAKING SODA SOLUTION. THE SOLUTION
SHOULD BE ABOUT 2 TABLESPOONS OF BAKING SODA TO A QUART OF WATER.
? WASH THE BUCKET WITH A MILD DETERGENT SOLUTION.
? THE OUTSIDE OF THE ICE MAKER SHOULD BE CLEANED WITH MILD DETERGENT AND
WARM WATER.
? THE CONDENSER COILS SHOULD BE VACUUMED WHEN THEY ARE DUSTY OR DIRTY.
CAUTION
FAILURE TO UNPLUG THE ICE MAKER COULD RESULT IN ELECTRICAL SHOCK OR
PERSONAL INJURY.
9
POWER FAILURE
MOST POWER FAILURES ARE CORRECTED WITHIN A FEW HOURS AND SHOULD NOT AFFECT
THE TEMPERATURE OF YOUR ICE MAKER IF YOU MINIMIZE THE NUMBER OF TIMES THE DOOR
IS OPENED. IF THE POWER IS GOING TO BE OFF FOR A LONGER PERIOD OF TIME, YOU NEED
TO TAKE THE PROPER STEPS TO DISCONNECT YOUR APPLIANCE.
VACATION TIME/STORAGE
1. SHUT OFF WATER SUPPLY AT THE MAIN WATER VALVE.
2. DISCONNECT THE WATER SUPPLY LINE FROM VALVE.
3. ALLOW UNIT TO RUN FOR AN HOUR OR TWO UNTIL ALL REMAINING ICE CUBES HAVE BEEN
EJECTED.
4. DISCONNECT UNIT FROM MAIN POWER SOURCE.
5. DRY OUT EXCESS WATER FROM ICE MAKER ASSEMBLY
6. LEAVE THE DOOR OPEN AT LEAST TWO INCHES.
MOVING YOUR ICE MAKER
? SECURELY TAPE DOWN ALL LOOSE ITEMS INSIDE YOUR ICE MAKER.
? TURN THE LEVELING SCREWS UP TO THE BASE TO AVOID DAMAGE.
? TAPE THE DOOR SHUT.
? BE SURE THE ICE MAKER STAYS IN THE UPRIGHT POSITION DURING TRANSPORTATION.
ENERGY SAVING TIPS
? THE ICE MAKER SHOULD BE LOCATED IN THE COOLEST AREA OF THE ROOM, AWAY FROM
HEAT PRODUCING APPLIANCES OR HEATING DUCTS, AND OUT OF THE DIRECT
SUNLIGHT.
10
PROBLEMS WITH YOUR ICE MAKER?
YOU CAN SOLVE MANY COMMON ICE MAKER PROBLEMS EASILY, SAVING YOU THE COST OF A
POSSIBLE SERVICE CALL. TRY THE SUGGESTIONS BELOW TO SEE IF YOU CAN SOLVE THE
PROBLEM BEFORE CALLING THE SERVICER.
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSE
ICE MAKER DOES NOT OPERATE.
NOT PRODUCING ICE
COMPRESSOR TURNS ON AND OFF
FREQUENTLY.
VIBRATIONS. CHECK TO ASSURE THAT THE ICE MAKER IS
THE ICE MAKER SEEMS TO MAKE TOO MUCH
NOISE.
THE DOOR WILL NOT CLOSE PROPERLY.
ICE CUBES ARE MELTED TOGETHER
NOT PLUGGED IN.
THE CIRCUIT BREAKER TRIPPED OR A
BLOWN FUSE.
THE ICE MAKER POWER SWITCH IS SET AT
"0FF".
AIRFLOW TO FRONT GRILL BLOCKED.
THE ICE MAKER ARM IS SET TO THE OFF
POSITION.
WATER SUPPLY IS TURNED OFF.
WATER LINE IS CRIMPED.
ICE MAKER HAS EXCESSIVE FROST BUILD
UP.
THE ROOM TEMPERATURE IS HOTTER THAN
NORMAL.
THE DOOR IS OPENED TOO OFTEN.
THE DOOR IS NOT CLOSED COMPLETELY.
THE DOOR GASKET DOES NOT SEAL
PROPERLY.
THE ICE MAKER DOES NOT HAVE THE
CORRECT CLEARANCES.
LEVEL.
THE RATTLING NOISE MAY COME FROM THE
FLOW OF THE REFRIGERANT, WHICH IS
NORMAL.
AS EACH CYCLE ENDS, YOU MAY HEAR
GURGLING SOUNDS CAUSED BY THE FLOW
OF REFRIGERANT IN YOUR ICE MAKER.
CONTRACTION AND EXPANSION OF THE
INSIDE WALLS MAY CAUSE POPPING AND
CRACKLING NOISES.
THE ICE MAKER IS NOT LEVEL.
THE ICE MAKER IS NOT LEVEL.
THE DOOR IS REVERSED AND NOT
PROPERLY INSTALLED.
THE GASKET IS DIRTY.
THE BUCKET IS OUT OF POSITION.
ICE MAKER DOOR IS OPENED TOO OFTEN.
11
SERVICE FOR YOUR ICE MAKER
WE ARE PROUD OF OUR CUSTOMER SERVICE ORGANIZATION AND THE NETWORK OF
PROFESSIONAL SERVICE TECHNICIANS THAT PROVIDE SERVICE ON YOUR AVANTI ICE
MAKER. WITH THE PURCHASE OF YOUR AVANTI ICE MAKER, YOU CAN BE CONFIDENT THAT IF
YOU EVER NEED ADDITIONAL INFORMATION OR ASSISTANCE, THE AVANTI PRODUCTS
CUSTOMER SERVICE TEAM WILL BE HERE FOR YOU. JUST CALL US TOLL-FREE.
AVANTI PRODUCTS CUSTOMER SERVICES
PRODUCT INFORMATION
800-323-5029
PART ORDERS
800-220-5570
IN-HOME REPAIR SERVICE
800-220-5570
WHATEVER YOUR QUESTIONS ARE ABOUT
OUR PRODUCTS, HELP IS AVAILABLE.
YOU MAY ORDER PARTS AND ACCESSORIES
THAT WILL BE DELIVERED DIRECTLY TO
YOUR HOME, BY PERSONAL CHECK, MONEY
ORDER, MASTER CARD, OR VISA.
AN AVANTI PRODUCTS AUTHORIZED
SERVICE CENTER WILL PROVIDE EXPERT
REPAIR SERVICE, SCHEDULED AT A TIME
THAT IS CONVENIENT FOR YOU. OUR
TRAINED SERVICERS KNOW YOUR ICE
MAKER INSIDE AND OUT.
12
WHAT IS NOT COVERED
YOUR AVANTI PRODUCTS
WARRANTY
WHAT IS COVERED
LIMITED ONE- YEAR
WARRANTY
FOR ONE YEAR FROM THE DATE OF
PURCHASE BY THE ORIGINAL OWNER,
AVANTI PRODUCTS WILL, AT ITS OPTION,
REPAIR OR REPLACE ANY PART OF THE
ICE MAKER WHICH PROVES TO BE
DEFECTIVE IN MATERIAL OR
WORKMANSHIP UNDER NORMAL USE.
DURING THIS PERIOD AVANTI PRODUCTS
WILL PROVIDE ALL PARTS AND LABOR
NECESSARY TO CORRECT SUCH
DEFECTS FREE OF CHARGE, SO LONG AS
THE ICE MAKER HAS BEEN INSTALLED AND
OPERATED IN ACCORDANCE WITH THE
WRITTEN INSTRUCTIONS IN THIS MANUAL.
IN RENTAL OR COMMERCIAL USE, THE
WARRANTY PERIOD IS 90 DAYS. ALL
AVANTI APPLIANCES OF 3.5 CUBIC FEET
CAPACITY OR LESS MUST BE
BROUGHT/SENT TO THE APPLIANCE
SERVICE SHOP FOR REPAIR.
STAPLE YOUR SALES RECEIPT HERE.
PROOF OF ORIGINAL PURCHASE DATE IS
NEEDED TO OBTAIN SERVICE UNDER
WARRANTY.
LIMITED SECOND THROUGH
FIFTH YEAR WARRANTY
FOR THE SECOND THROUGH THE FIFTH YEAR
FROM DATE OF ORIGINAL PURCHASE, AVANTI
PRODUCTS WILL PROVIDE A REPLACEMENT
COMPRESSOR FREE OF CHARGE DUE TO A
FAILURE. YOU ARE RESPONSIBLE FOR THE
SERVICE LABOR AND FREIGHT CHARGES. IN
RENTAL OR COMMERCIAL USE, THE LIMITED
COMPRESSOR WARRANTY IS ONE YEAR AND
NINE MONTHS. COST TO MOVE THE ICE MAKER
TO THE SERVICERS’ SHOP AND BACK TO THE
USER'S HOME, AS MAY BE REQUIRED, ARE THE
USER'S RESPONSIBILITY.
? INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
? PARTS AND LABOR COSTS FOR THE
FOLLOWING WILL NOT BE CONSIDERED AS
WARRANTY:
? DOOR SPRINGS AND/OR FRAMES.
? INNER DOOR PANELS AND/OR DOOR
SUPPORTS.
? CHEST ICE MAKER LID LINERS.
? PLASTIC CABINET LINERS.
? REPAIRS PERFORMED BY UNAUTHORIZED
SERVICERS.
? SERVICE CALLS THAT DO NOT INVOLVE
DEFECTS IN MATERIAL OR WORKMANSHIP SUCH
AS CUSTOMER EDUCATION, DOOR REVERSAL,
OR PROPER INSTALLATION.
? SERVICE CALLS THAT ARE RELATED TO
EXTERNAL PROBLEMS, SUCH AS ABUSE,
MISUSE, INADEQUATE ELECTRICAL POWER,
ACCIDENTS, FIRE, FLOODS, OR ACTS OF GOD.
? REPLACEMENT OF HOUSE FUSES OR
RESETTING CIRCUIT BREAKERS.
? FAILURE OF THE PRODUCT IF IT IS USED FOR
OTHER THAN ITS INTENDED PURPOSE.
? THIS WARRANTY DOES NOT APPLY OUTSIDE THE
CONTINENTAL U.S.A.
13
14
INSTRUCCIONES EN ESPAÑOL
PRECAUCION
? LEA TODAS LAS INSTRUCCIONES ANTES DE USAR SU ELECTRODOMESTICO.
? PELIGRO O PRECAUCION: EXISTE EL RIESGO QUE LOS NIÑOS QUEDEN
ATRAPADOS.
? NIÑOS ATRAPADOS O SOFOCAMIENTO NO SON UN PROBLEMA DEL PASADO. LOS
ELECTRODOMESTICOS SON PELIGROSOS AUN SI SOLO LOS DEJA EN EL GARAJE
POR UN PAR DE DIAS.
? ANTES DE DESECHAR SU MAQUINA DE HACER HIELO O REFRIGERADOR USADO:
QUITELE LAS PUERTAS. DEJE LAS REPISAS EN SU LUGAR PARA EVITAR QUE LOS
NIÑOS SE QUEDEN ATRAPADOS.
? NO PERMITA QUE LOS NIÑOS MANEJEN, JUEGUEN O ENTREN DENTRO DEL
ELECTRODOMESTICO.
? NO LIMPIE SU ELECTRODOMESTICO CON LIQUIDOS INFLAMABLES. LOS GASES
PUEDEN OCASIONAR FUEGO O UNA EXPLOSION.
? NO GUARDE NI USE GASOLINA U OTROS LIQUIDOS INFLAMABLES CERCA DE ESTE
O DE CUALQUIER OTRO ELECTRODOMESTICO. LOS VAPORES PUEDEN
OCASIONAR FUEGO O EXPLOSION.
- GUARDE ESTAS INSTRUCCIONES.-
INSTRUCCIONES PARA LA INSTALACION
ANTES DE USAR SU EQUIPO
? RETIRE LA ENVOLTURA INTERNA Y EXTERNA.
? VERIFIQUE QUE TENGA LAS SIGUIENTES PARTES: 1 CANASTA DE HIELO, 1 MANUAL DE
INSTRUCCIONES, 1 RECOJEDOR DE HIELO PLASTICO, Y 25 PIES DE LINEA DE AGUA.
? ANTES DE CONECTAR SU ELECTRODOMESTICO A LA CORRIENTE ELECTRICA, UBIQUELO
EN UNA SUPERFICIE PLANA POR LO MENOS POR 2 HORAS. ESTO REDUCIRA LA
POSIBILIDAD DE MALFUNCIONAMIENTO EN EL SISTEMA DE ENFRIAMIENTO POR LA
MANIPULACION DURANTE EL TRANSPORTE.
? LIMPIE LA SUPERFICIE INTERIOR CON AGUA TIBIA USANDO UN PAÑO SUAVE.
? INSTALACION DE SU MAQUINA DE HACER HIELO
? UBIQUE SU MAQUINA DE HACER HIELO EN UN PISO QUE SEA LO SUFICIENTEMENTE
FUERTE, PARA SOPORTAR SU PESO CUANDO ESTE TOTALMENTE LLENO O CARGADO.
PARA NIVELAR LA MAQUINA DE HACER HIELO, AJUSTE LAS PATAS DELANTERAS.
? NO ES NECESARIO DEJAR ESPACIO ENTRE LA PARTE TRASERA Y LOS COSTADOS DE SU
ELECTRODOMESTICO
? MANTENGA SU MAQUINA DE HACER HIELO ALEJADO DEL AIRE CALIENTE, VAPOR O
LIQUIDOS QUE PUEDAN SALPICARLO, YA QUE LA UNIDAD PODRIA AVERIARSE.
? LOS RAYOS SOLARES DIRECTOS PUEDEN DAÑAR LA CAPA ACRILICA, Y LAS FUENTES DE
CALOR PUEDEN OCASIONAR UN AUMENTO EN EL CONSUMO ELECTRICO. MANTENGALO
LO MAS ALEJADO POSIBLE DEL AGUA PARA PREVENIR ALGUN CHOQUE ELECTRICO.
EVITE LOS SITIOS HUMEDOS Y LOS AMBIENTES EXTREMADAMENTE FRIOS YA QUE ESTO
PUEDE AFECTAR LA EFICIENCIA DEL ENFRIAMIENTO DE SU MAQUINA DE HACER HIELO.
? EVITE UBICAR SU MAQUINA DE HACER HIELO EN AREAS MOJADAS O MUY HUMEDAS.
MUCHA HUMEDAD EN EL AIRE PUEDE CAUSAR LA FORMACION DE ESCARCHA
RAPIDAMENTE Y NECESITARA DESCONGELAR SU MAQUINA DE HACER HIELO MAS
PARA REDUCIR EL RIESGO DE INCENDIO,
DESCARGA ELECTRICA, O DAÑO CUANDO
USE SU ELECTRODOMESTICO, SIGA LAS
SIGUIENTES PRECAUCIONES.
15
FRECUENTEMENTE.
? CONECTE LA MAQUINA DE HACER HIELO A UN ENCHUFE DE PARED EXCLUSIVO E INSTALE
EL CABLE DE TIERRA. BAJO NINGUNA RAZON SE DEBE RETIRAR LA TERCERA PUNTA DEL
ENCHUFE. CUALQUIER CONSULTA CON RESPECTO A LA ENERGIA Y/O CABLE DE TIERRA
DEBE SER DIRIGIDA A UN ELECTRICISTA CERTIFICADO O AUTORIZADO POR EL SERVICIO
TECNICO DE AVANTI PRODUCTS.
? CONEXION ELECTRICA-
ESTE ELECTRODOMESTICO DEBE SER CONECTADO A TIERRA. EN EL CASO QUE OCURRA
UN CORTO CIRCUITO, LA CONEXION A TIERRA REDUCE EL RIESGO DE RECIBIR UN CHOQUE
ELECTRICO YA QUE CUENTA CON UN ALAMBRE PARA EL ESCAPE DE LA CORRIENTE
ELECTRICA. ESTE ELECTRODOMESTICO ESTA EQUIPADO CON UN ENCHUFE QUE CONSTA
DE TRES PUNTAS, LA TERCERA PUNTA ES LA CONEXION A TIERRA. ESTE ENCHUFE DEBE
SER INSERTADO A UN ENCHUFE DE PARED QUE ESTE CORRECTAMENTE INSTALADO CON
LA CONEXION A TIERRA.
ADVERTENCIA
? EL USO INAPROPIADO DEL ENCHUFE A TIERRA PUEDE DESENCADENAR UN CHOQUE
ELECTRICO. CONSULTE EL PERSONAL AUTORIZADO DE AVANTI PRODUCTS SI TIENE
ALGUNA DUDA SOBRE LAS INSTRUCCIONES O SI TIENE ALGUNA CONSULTA SI EL
ELECTRODOMESTICO ESTA CORRECTAMENTE INSTALADO A LA CORRIENTE ELECTRICA
Y A TIERRA. SI EL CORDON DEL ENCHUFE DEL ELECTRODOMESTICO SE ENCUENTRA
DAÑADO, DEBE SER REEMPLAZADO POR EL SERVICIO TECNICO DE AVANTI PRODUCTS.
? EL CORDON DEL ENCHUFE ESTA EQUIPADO CON TRES PUNTAS QUE ENCAJAN
PERFECTAMENTE EN UN ENCHUFE DE PARED STANDARD PARA REDUCIR EL RIESGO DE
UN CHOQUE ELECTRICO.
? BAJO NINGUNA CIRCUNSTANCIA CORTE O SAQUE LA TERCERA PUNTA DEL ENCHUFE, YA
QUE ESTE ES PARA QUE VAYA CONECTADO A TIERRA.
? NO USE UNA EXTENSION.
? EL VOLTATE DE ESTE ELECTRODOMESTICO ES DE 120 VOLTIOS AC, TIENE UNA SALIDA
ELECTRICA DE 60 HZ. Y CONSTA DE UN ENCHUFE DE TRES PUNTAS QUE VA CONECTADO
AL ENCHUFE DE PARED.
? EL CORDON DEL ENCHUFE DEBE SER ASEGURADO ATRAS DEL ELECTRODOMESTICO Y
NO DEJARLO EXPUESTO PARA EVITAR ACCIDENTES.
CONEXION A FUENTE DE AGUA
? ANTES DE INSTALAR LA UNIDAD VERIFIQUE LOS CODIGOS DE PLOMERIA EN SU ESTADO.
RECOMENDAMOS QUE PARA LA INSTALACION USE UN PLOMERO PROFESIONAL Y CON
LICENCIA.
? CONECTE EL TUBO (INCLUIDO) A LA FUENTE DE AGUA FRIA MAS CERCANA . INSTALE
SUFICIENTE TUBERIA A LA UNIDAD PARA PERMITIRLE MOVIMIENTO LIBRE DURANTE LA
LIMPIEZA Y EL SERVICIO. ASEGURESE QUE LA TUBERIA NO SEA APLASTADA O DAÑADA
DURANTE EL TRANSPORTE.
? COLOQUE LA UNIDAD DE MANERA QUE PERMITA LA CIRCULACION DEL AIRE A TRAVES
DE LA REJILLA DELANTERA (DIBUJO 1). CON UN TRAPO LIMPIO Y HUMEDO LIMPIE LA
UNIDAD POR DENTRO Y EL DEPOSITO DE HIELO.
OPERACION INICIAL
16
1. CONECTE EL APARATO A UN ENCHUFE DE PARED DE 120V AC, POLARIZADO Y CON
DIBUJO 2
SALIDA A TIERRA.
2. ENCIENDA LA UNIDAD COLOCANDO EL INTERRUPTOR EN LA POSICION “ON”.
3. VERIFIQUE QUE LA FUENTE DE AGUA ESTE ABIERTA. EL AGUA ENTRARA AL MECANISMO
DE HACER HIELO CUANDO LA UNIDAD ALCANCE LA TEMPERATURA APROPIADA.
4. LOS PRIMEROS CUBOS DE HIELO PODRIAN SALIR PEQUEÑOS DEBIDO AL AIRE EN LA
ENTRADA DEL AGUA. LOS SIGUIENTES CUBOS TENDRAN EL TAMAÑO NORMAL EN
FORMA DE MEDIA LUNA.
5. EL PRIMER CICLO TOMARA APROXIMADAMENTE 30-40 MINUTOS.
6. PARA LLENAR EL DEPOSITO SE REQUIEREN 140 ML DE AGUA Y APROXIMADAMENTE 11
HORAS.
IMPORTANTE: DESHAGASE DE LOS CUBOS DE HIELO HECHOS DURANTE LAS 3 PRIMERAS
HORAS DE OPERACION.
? CUANDO EL DEPOSITO DE HIELO ESTE LLENO, EL MECANISMO PARA
HACER HIELO SE DETIENE AUTOMATICAMENTE. SIN EMBARGO EL
MOTOR CONTINUA ENFRIANDO Y MANTIENE LOS CUBOS DE HIELO
CONGELADOS.
? PARA DETENER LA CAIDA DE CUBOS AL DEPOSITO, LEVANTE EL
BRAZO DE METAL (DIBUJO 2).
? SI LA MAQUINA DE HACER HIELO NO ES USADA REGULARMENTE,
RECOMENDAMOS QUE VACIE EL DEPOSITO DEL HIELO
PERIODICAMENTE PARA ASEGURAR QUE TENGA HIELO FRESCO.
? A VECES LOS CUBOS PUEDEN SALIR BLANCOS O NUBOSOS, ESTO ES NORMAL Y NO
AFECTA EL SABOR O COMPOSICION DEL AGUA.
? LA REJILLA DELANTERA DEBE ESTAR LIBRE DE POLVO O PELUSAS PARA PERMITIR LA
LIBRE CIRCULACION DEL AIRE.
? LA UNIDAD DEBE SER DESCONGELADA APROXIMADAMENTE CADA 4-6 SEMANAS O
CUANDO VEA ESCARCHA DE MAS DE ¼” (7 MM) DE ESPESOR EN LAS PAREDES. PARA
DESCONGELAR, APAGUE LA UNIDAD, VACIE EL DEPOSITO DE HIELO Y MANTENGA LA
PUERTA ABIERTA POR LO MENOS 2” (5 CM).
COMO CAMBIAR LA DIRECCION DE APERTURA DE LA PUERTA
EN CASO DE QUE NECESITE CAMBIAR EL LADO DE APERTURA DE LA PUERTA, POR FAVOR
CONSULTE AL SERVICIO POS-VENTA DE SU LOCALIDAD.
USANDO SU MAQUINA DE HACER HIELO
ADVERTENCIA
NO USE AGUA HIRVIENDO PORQUE DAÑARA LAS PARTES DE PLASTICO. TAMPOCO USE
PUNTAS O INSTRUMENTOS METALICOS PARA RETIRAR LA ESCARCHA YA QUE DAÑARA EL
ESPIRAL DE ENFRIAMIENTO Y CANCELARA LA GARANTIA. LE RECOMENDAMOS USAR UNA
ESPATULA DE PLASTICO.
CUIDADO Y MANTENIMIENTO
? LIMPIANDO SU MAQUINA DE HACER HIELO
? EMPUJE EL CONTROL A “0FF”. DESCONECTE EL APARTO Y RETIRE LOS HIELOS.
? LAVE EL INTERIOR CON AGUA TIBIA Y UN PAÑO SUAVE REMOJADO EN UNA SOLUCION DE
BICARBONATO DE SODIO. LA SOLUCION CONSISTE EN 2 CUCHARADAS DE BICARBONATO
DE SODIO EN UN LITRO DE AGUA.
? LAVE LA CANASTA DE ALMACENAJE CON UN DETERGENTE SUAVE.
? LAS PARTES EXTERNAS DE SU MAQUINA DEBEN SER LIMPIADAS CON UN DETERGENTE
SUAVE Y AGUA TIBIA.
17
? EL ESPIRAL DEL CONDENSADOR DEBE SER LIMPIADO CUANDO ESTE SUCIO O TENGA
POLVO.
ADVERTENCIA
ASEGURESE DE DESCONECTAR LA MAQUINA DE HACER HIELO DE LA CORRIENTE
ELECTRICA. SI NO LO HACE, PUEDE OCASIONAR UN CHOQUE ELECTRICO O HERIRSE.
SI FALLA EL SUMINISTRO ELECTRICO
USUALMENTE LA ELECTRICIDAD REGRESA EN UNAS POCAS HORAS SIN AFECTAR LA
TEMPERATURA DE SU MAQUINA DE HACER HIELO, SIEMPRE QUE LA PUERTA NO SE ABRA
MUY FRECUENTEMENTE. SI LE VA FALTAR ELECTRICIDAD POR UN PERIODO DE TIEMPO MAS
LARGO, USTED DEBE TOMAR LOS PASOS APROPIADOS PARA PROTEGER SU
ELECTRODOMESTICO.
GUIA PARA SOLUCIONAR PROBLEMAS
PROBLEMA SOLUCION
SU ELECTRODOMESTICO NO
FUNCIONA
EL COMPRESOR SE ENCIENDE Y SE
APAGA FRECUENTEMENTE
VIBRACION. ASEGURESE QUE LA MAQUINA DE HACER HIELO ESTE
SONIDO DE BURBUJEO, GOTEO,
COMO AGUA QUE HIERVE O
CRUJIDOS.
LA PUERTA NO CIERRA
COMPLETAMENTE
NO ESTA CONECTADO A LA CORRIENTE ELECTRICA.
EL INTERRUPTOR SALTO O SE QUEMO UN FUSIBLE
EL CONTROL ESTA EN “OFF”
LA TEMPERATURA DE LA HABITACION ES MAS CALIENTE
DE LO NORMAL.
LA PUERTA PERMANECE ABIERTA MUCHO TIEMPO.
LA PUERTA NO QUEDO COMPLETAMENTE CERRADA.
LA EMPAQUETADURA DE LA PUERTA NO ESTA SELLADA
ADECUADAMENTE.
LA MAQUINA DE HACER HIELO NO TIENE EL SUFICIENTE
ESPACIO LIBRE.
HAY MUCHA ESCARCHA.
DESCONGELAR INMEDIATAMENTE.
UBICADA EN UN LUGAR TOTALMENTE PLANO.
ESTO ES NORMAL. ES EL REFRIGERANTE (USADO PARA
ENFRIAR LA MAQUINA DE HACER HIELO) QUE ESTA
CIRCULANDO A TRAVES DEL SISTEMA.
LA CONTRACCION Y EXPANSION DE LAS PAREDES
INTERNAS PUEDE OCASIONAR SONIDOS COMO
CRUJIDOS.
LA MAQUINA DE HACER HIELO NO ESTA TOTALMENTE
NIVELADA.
LA DIRECCION DE APERTURA DE LA PUERTA FUE
INVERTIDA PERO INSTALADA INCORRECTAMENTE.
EL SELLADOR DE LA PUERTA ESTA SUCIO.
LA CANASTA DE ALMACENAJE ESTA FUERA DE SU SITIO
OBSTACULIZANDO EL CIERRE DE LA PUERTA.
PRINTED IN CHINA
Loading...