Avanti IM12-IS User Manual
ICE MAKER/MAQUINA DE HACER HIELO
INSTRUCTION MANUAL/MANUAL DE INSTRUCCIONES
Model Number / No. de Modelo:
IM12-IS
BEFORE
USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
La sección en español empieza en la página 14.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications
without notice.
Avanti Products, A Division of The Mackle C o ., Inc.
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com
2
TABLE OF CONTENTS
Ice-Maker Safety
3
Important Safeguides
4
Help Us Help You
5
Parts and Features
6
Important Safety Instructions
7
Installation Instructions
7
Before Using Your Appliance
7
Installation of Your Applianc e
7
Electrical Connection
8
Operating Your Appliance
9
Control Panel Description
9
Operating Your Appliance
10
Getting Ice from Ice-bin
10
Care and Maintenance
10
Cleaning Your Appliance
10
Space Requirements
10
Power Failure
11
Troubleshooting Guide
11
Service for Your Appliance
12
Wiring Diagram
12
Your Avanti Products Warrant y
13
Instrucciones en Español
14 – 18
Registration Information and Registration Card
19
3
ICE MAKER SAFETY
YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANT.
We have provided many important safety messages in this manual for your appliance. Always read and
obey all safety messages.
This is the safety alert symbol. This symbol alerts you to
Potential hazards that can kill or injure you and others.
All safety messages will follow the safety alert symbol
And either the words” DANGER”, “WARNING” or “CAUTION”.
Danger means that failure to heed this safety
statement may result in severe personal
injury or death.
Warning means that failure to heed this
safety statement may result in extensive
product damage, serious personal injury, or
death.
Caution means that failure to heed this
safety statement may result in minor or
moderate personal injury, property or
equipment damage.
All safety messages will alert you to know what potential hazard is, tell you how to reduce the chance of
injury, and let you know what can happen if the instruc tions ar e not foll o wed .
4
IMPORTANT SAFEGUIDES
Before the appliance is used, it must be properly positioned
and installed as described in this manual, so read the manual
carefully. To reduce the risk of fire, electrical shock or
injury when using the appliance, follow basic precaution,
Including the following:
• Plug into a grounded 3-prong outlet, d o not r emove gr ounding prong, do n ot use a n adapt er, and do not u se an
extension cord.
• It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that
cannot be turned off by a switch or pull chain.
• Never clean appliance parts w ith flam mable fl uids. T hese fum es can crea te a fire h azard or ex plosion. An d do
not store or use gasoline or other flammable vapors and liquids in the vicinity of thi s or any other appl iance.
The fumes can create a fire hazard or explosion.
• Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is
disconnected.
• Do not connect or disconnect the electric plug when your hands are wet.
• Unplug the appliance or disco nnect pow er bef ore clea ning or serv icing. F ailure t o do so ca n result in electr ica l
shock or death.
• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this
manual. All other servicing should be referred to a qualified technician.
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
• Use two or more people to move and install appliance. Failure to do so can result in back or other injury.
• To ensure proper ventilation f or your app liance, the fr ont of t he unit must b e comp letely unobstru cted. C hoos e
a well-ventilated are a with tem peratur es above 60°f (16
an area protected from the element, such as wind, rain, water spray or drips.
• The appliance should not be located next to ovens, grills or other sources of high heat.
• The appliance must be installed with all electrical, water and drain connections in accordance with state and
local codes. A standard electrical supply (115 v ac only, 60 hz), properly grounded in accordance with the
national electrical code and local codes and ordi nan ce s is require d.
• Do not kink or pinch the power supply cord of appliance.
• The fuse (or circuit breaker) size should be 15 amperes.
• It is important for the appliance to be leveled in order to work properly. You may need to make several
adjustments to level it.
• All installation must be in accordance with local plumbing code requirements.
• Make certain that the pipes are not pinched or kinked or damaged during installations.
• Check for leaks after connection.
• Never allow children to operate, play with or crawl inside the appliance.
• If you use the dr aina ge co ntain er, you must set the dra in sele ct switch to off or the water can overfl ow from the
drainage container
• Although the unit has been tested at the factory, due to long-term transit and storage, the first batch of cubes
must be discarded.
• Do not use solvent-ba sed cleaning agents of abr asives on t he interior. These cleaner s may damag e or discolo r
the interior.
• Do not use this apparatus for other than its intended purpose.
°
c) and below 90°f (32°c). This unit must be installed in
5
Help us help you…
Read this guide carefully.
It is intended to help you operate and maintain
your new ice maker properly.
Keep it handy to answer your questions.
If you don't understand something or you need
more help, please call:
Avanti customer service
800-220-5570
Keep proof of original purchase date (such as
your sales slip) with this guide to establish the
warranty period.
If you need service
We're proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are some
steps to follow for further assistance.
First, contact the people who serviced your ice
maker. Explain why you are not pleased. In
most cases, this will solve the problem.
Next, if you are still not pleased, write all the
Write down the model and serial numbers.
You'll find them on a plate located on the rear
wall of the ice maker.
Please write these numbers here:
____________________________________
Date of purchase
____________________________________
Model number
____________________________________
Serial number
Use these numbers in any correspondence or
service calls concerning your ice maker.
If you received a damaged ice maker,
immediately contact the dealer (or builder) that
sold you the ice maker.
Save time and money. Before you call for
service, check the troubleshooting guide. It lists
causes of minor operating problems that you
can correct yourself.
details, including your telephone number, and
send it to:
Customer Servic e
Avanti Products
10880 NW 30
Miami, Fl 33172 USA
th
Street
6
1
ICE SCOOP
5
AIR VENT
2
ICE FULL SENSOR
6
WATER DRAIN PLUG
3
ICE BASKET
7
MAXIMUM WATER LEVEL MARK
4
TOP WITH CONTROL PANEL
PARTS AND FEATURES
Loading...