Avanti EWC8TV User Manual

INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
Model Number / No. de Modelo:
THERMOELECTRIC WINE CHILLER VINERA TERMOELECTRICA
EWC8TV
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
La sección en español empieza en la página 12.
Avanti Products has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice.
Avanti Products, A Division of The Mackle Co., Inc.
P.O. Box 520604 - Miami, Florida 33172
www.avantiproducts.com
2
TABLE OF CONTENTS
Help Us Help You
3
Parts and Features
4
Important Safety Instructions
5
Installation Instructions
5
Before Using Your Wine Chiller
5
Installation of Your Wine Chiller
5
Electrical Connection
6
Extension Cord
6
Operating Your Wine Chiller
7
Temperature Control
8
Storage Capacity
8
Interior Light
8
Care and Maintenance
8
Cleaning Your Wine Chiller
8
Power Failure
8
Vacation Time
9
Moving Your Wine Chiller
9
Energy Saving Tips
9
Troubleshooting Guide
9
Service for Your Appliance
10
Wiring Diagram
10
Your Avanti Products War rant y
11
Instrucciones en Español
12 – 14
Registration Information and Registration Card
15
3
CAUTION:
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and maintain your new Wine Chiller properly.
Keep it handy to answer your questions. If you don't understand something or you need more assistance, please call:
Avanti Customer Service 800-220-5570
Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.
THIS WINE CHILLER IS NOT DESIGNED FOR THE STORAGE OF MEDICINE OR OTHER MEDICAL PRODUCTS.

IF YOU NEED SERVICE

We're proud of our ser vice and want you to be pleased. If for som e reason you are not happ y with the service you receive, here are some steps to follow for further assistance. FIRST, contact the people who serviced your Wine Chiller. Ex pla in wh y you are not ple ased. In most cases, this will solve the problem.
Write down the model and serial numbers.
You'll find them on a plate located on the rear outside wall of the Wine Chiller.
Please write these numbers here:
____________________________________ Date of Purchase
____________________________________ Model Number
____________________________________ Serial Number
Use these numbers in any correspondence or service calls concerning your Wine Chiller.
If you received a damaged Wine Chiller, immediately contact t he de aler (or bu ilder) that sold you the Wine Chiller.
Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.
NEXT, if you are still not pleased, write all the details, including your telephone number, and send it to:
Customer Servic e
Avanti Products 10880 NW 30 Street Miami, FL 33172 USA
4
1. Door seal
PARTS & FEATURES
1
5
6
7
8
2
3
4
2. Glass Door
3. Integrated Door Handle
4. Bottle Display Stand (2 Opened Bottles)
5. Interior Light
6. Shelves(2 Total)
7. Fan Cover
8. Leveling Legs
5
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock, these basic precautions:
-Save these instructions-
WARNING
or injury when using your appliance, follow
Read all instructions before using the Wine Chiller.
DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.
Before you throw away your old Wine Chiller: Take off the door. Leave the shelves in place so that children may not easily climb inside.
Never allow children to operate, play with, or crawl inside the appliance.
Never clean appliance parts with flammable fluids. The fumes can create a fire
hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
Do not repair or replace any part of the refrigerator or attempt a ny servicing unless specifically recommended in the user-maintenance instructions or in published user­repair instructions. Replace the fuse with the same type.
INSTALLATION INSTRUCTIONS
Before Using Your Wine Chiller
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
2 Shelves
1 Instruction Manual
2 Reusable Corks
Clean the interior surface with lukewarm water using a soft cloth.
Installation of Your Wine Chiller
This Wine Chiller is designed for free standing installation only, and should not be recessed or built-in (Fully recessed).
Place your Wine Chiller on a surface that is strong enough to support it when it is fully loaded.
Allow 5 inches of space between the back and sides of the refrigerator, which allows the proper
air circulation to cool the heat sink.
Locate the Wine Chiller away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.
This Wine Chiller uses thermoelectric refrigeration technology (no compressor) and is not designed for storage in hot areas like garages, warehouses or outdoors since it is designed to operate at a maximum of 30 degrees below the ambient temperature.
Avoid locating the unit in moist areas.
Plug the Wine Chiller into an exclusive, properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directe d to ward a certified electrician or an authorized Avanti Products s ervice cen ter .
After plugging the Wine Chiller into a wall outlet, allow the unit to cool down for 2-3 hours before placing any items in the compartment.
Loading...
+ 11 hidden pages