Avanti BD6000 User Manual
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
Model Number / No. de Modelo: BD6000
BEER DISPENSER
(DISPENSADOR / ENFRIADOR DE CERVEZA)
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
La sección en espa ñol empieza en la página 27 .
Avanti has a policy of continuous improvement on its products and reserves the right to change
materials and specifications without notice.
Avanti Products, A Division of The Mackle Co., Inc.
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com
BEER DISPENSER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual for your appliance. Always read
and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that
can kill or injure you and others. All safety messages will follow the Safety
Alert Symbol and either the words ” DANGER”, “WARNING” or “CAUTION”.
Danger means that failure to heed this
safety statement may result in severe
personal injury or death.
Warning means that failure to heed this
safety statement may result in extensive
product damage, serious personal injury, or
death.
Caution means that failure to heed this
safety statement may result in minor or
moderate personal injury, property or
equipment damage.
All safety message s will alert to know what potential hazard is, tell you how to reduce the chance of
injury, and let you know what can happen if the instructions are not followed.
2
IMPORTANT SAFEGUIDES
Before the appliance is used, it must be properly positioned and installed as
described in this manual,so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the appliance, follow basic precaution,
including the following:
? Plug into a grounded 3 -prong outlet, do not remove grounding prong, do not use an adapter, and
do not use an extension cord.
? Replace all panels before operating.
? It is recommended that a separate circuit, serving only your appliance be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
? Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of
this or any other appliance. The fumes can create a fire hazard or explosion.
? Before proceeding with cleaning and maintenance operations, make sure the power line of the
unit is disconnected.
? Do not connect or disconnect the electric plug when your hands are wet .
? Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result
in electrical shock or death.
? Do not attempt to repair or replace any part of your appliance unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
? Use two or more people to move and install appliance. Failure to do so can result in back or other
injury.
? To ensure proper ventilation for your appliance, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below
90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain,
water spray or drips.
? The appliance should not be located next to ovens, grills or other sources of high heat.
? The appliance must be installed with all electrical, water and drain connections in accordance with
state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances is required.
? Do not kink or pinch the power supply cord of appliance.
? The fuse (or circuit breaker) size should be 15 amperes.
? It is important for the appliance to be leveled in order to work properly. You may need to make
several adjustments to level it.
? All installation must be in accordance with local plumbing code requirements.
? Make certain that the pipes are not pinched or kinked or damaged during installations.
? Check for leaks after connection.
? Never allow children to operate, play with or crawl inside the appliance.
? If you use the drainage container, you must set the drain select switch to OFF or the water can
overflow from the drainage container
? Although the unit has been tested at the factory, due to long-term transit and storage, the first
batch of cubes must be discarded.
? Do not use solvent -based cleaning agents of abrasives on the interior. These cleaners may
damage or discolor the interior.
? Do not use this apparatus for other than its intended purpose.
3
REGISTRATION INFORMATION
Thank you for purchasing this fine Avanti product. Please fill out this form and return it within 100
days of purchase and receive these important benefits to the following address:
Avanti Products, A Division of The Mackle Co., Inc.
P.O.Box 520604 – Miami, Florida 33152
? Protect your product:
We will keep the model number and date of purchase of your new Avanti product on file to
help you refer to this information in the event of an insurance claim such as fire or theft.
? Promote better products:
We value your input. Your responses will help us develop products designed to best meet
your future needs.
-------------------------------------------------(detach here)----------------------------------------------------------
Avanti Registration Form
__________________________________ _____________________________________
Name Model # Serial #
__________________________________ _____________________________________
Address Date Purchased Store/Dealer Name
__________________________________ ______________________________________
City State Zip Occupation
__________________________________ As Your Primary Residence, Do You:
Area Code Phone Number ?Own ?Rent
Did You Purchase An Additional Warranty: Your Age:
?Extended ?Food Loss ?None ?under 18 ?18-25 ?26-30
Reason For Choosing This Avanti Product: ?31-35 ?36-50 ?over 50
Please indicate the most important factors Marital Status:
that influenced your decision to purchase ?Married ?Single
this product. Is This Product Used In The:
?Price ?Home ?Business
?Product Features How Did You Learn About This Product:
?Avanti Reputation ?Advertising
?Product Quality ?In Store Demo ?Personal Demo
?Salesperson Recommendation ?Other_______________________________
?Friend/Relative Recommendation Comments____________________________
?Warranty _____________________________________
?Other_______________________ _____________________________________
4
5
CAUTION
:
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and maintain
your new Beer Dispenser properly.
Keep it handy to answer your questions.
If you don't understand something or you need
more assistance, please call:
Avanti Customer Service
800-220-5570
Keep proof of original purchase date (such as
your sales slip) with this guide to establish the
warranty period.
THIS BEER DISPENSER IS NOT
DESIGNED FOR THE STORAGE
OF MEDICINE OR OTHER
MEDICAL PRODUCTS.
IF YOU NEED SERVICE
We're proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are some
steps to follow for further assistance.
FIRST, contact the people who serviced your
Beer Dispenser. Explain why you are not
pleased. In most cases, this will solve the
problem.
Write down the model and serial numbers.
You'll find them on a plate located on the rear
wall of the Beer Dispenser.
Please write these numbers here:
____________________________________
Date of Purchase
____________________________________
Model Number
____________________________________
Serial Number
Use these numbers in any correspondence or
service calls concerning your Beer Dispenser.
If you received a damaged Beer Dispenser,
immediately contact the dealer (or builder) that
sold you the Beer Dispenser.
Save time and money. Before you call for
service, check the Troubleshooting Guide. It
lists causes of minor operating problems that
you can correct yourself.
NEXT, if you are still not pleased, write all the
details, including your telephone number, and
send to:
Customer Service
Avanti Products
10880 NW 30 Street
Miami, FL 33172 USA
6
TABLE OF CONTENTS
Beer Dispenser Safety 2
Important Safeguides 3
Registration Information ______________________________________________________ 4
Help Us Help You … ________________________________ __________________________ 6
Parts and Features ___________________________________________________________ 8
Important Safety Instructions ________________________________ __________________ 9
Installation Instructions ________________________________ _______________________ 9
Before Using Your Beer Dispenser 9
Installation of Your Beer Dispenser _____________________________________________ 9
Electrical Connection ________________________________________________________10
Extension Cord 10
Reversing The Door Swing of Your Appliance 10
Installation Instruction For Beer Dispenser __________________________________ 11-15
Spanner Faucet Wrentch 15
Plastic Faucet Lever 15
Dispensing Beer ________________________________ ____________________________15
Converting Your Beer Dispenser To An All Refrigerator __________________________16
Operating Your Beer Dispenser_______________________________________________16
Setting the Temperature________________________________ ______________________16
Automatic Defrosting ________________________________________________________16
Care and Maintenance _______________________________________________________16
Cleaning Your Beer Dispenser ________________________________________________16
Vacation Time_______________________________________________________________17
Moving Your Beer Dispenser ________________________________ _________________17
Draught Beer Trouble Guide 1 7-22
Troubleshooting Guide ________________________________ ______________________23
S ervice For Your Beer Dispenser ______________________________________________24
Your Avanti Products Warranty _______________________________________________25
Wiring Diagram 26
INSTRUCCIONES EN ESPAÑOL 27~36
7
PARTS AND FEATURES
1. Beer Tower
2. Mylar Washer
3. Safety Guard Rail
4. Drip Tray
5. Adjustable Thermostat
6. CO2 Regulator
7. CO2 Gas Cylinder
8. CO2 Gas Cylinder Holder
9. Evaporator
10. Reversible Door
11. Beer Keg (Not Included)
12. Metal Plate
13. Metal Bracket (2)
14. Castors with Lock (4)
8
IMPORTANT SAFETY INSTRUCTIONS
?WARNING ?
To reduce the risk of fire, electrical shock, or
injury when using your Beer Dispenser, follow
these basic precautions:
? Read all instructions before using the unit.
? DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned
appliances are still dangerous . . . even if they will “just sit in the garage a few days”.
? Before you throw away your old unit: Take off the door. Leave the shelves in place
so that children may not easily climb inside.
? Never allow children to operate, play with, or crawl inside the unit.
? Never clean unit parts with flammable fluids. The fumes can create a fire hazard or
explosion.
? Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of
this or any other unit. The fumes can create a fire hazard or explosion.
-Save these instructions-
INSTALLATION INSTRUCTIONS
? Before Using Your Beer Dispenser
? Remove the exterior and interior packing.
? Check to be sure you have all of the following parts:
? 1 Instruction manual
? 1 Safety Guard Rail
? 1 Drip Tray (2 Pieces)
? 1 CO2 Cylinder Holder
? 1 CO2 Regulator (Box)
? 1 CO2 Empty Cylinder(Box)
? 1 CO2 Air Line Hose (Red)
? 2 CO2 Hose Connectors
? 1 Beer Keg Coupler (Box)
? 1 Beer Tower Assembly
? Before connecting the Beer Dispenser to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system
from handling during transportation.
? Clean the interior surface with lukewarm water using a soft cloth.
? Installation of Your Beer Dispenser
? This appliance is designed to be free standing only, and should not be recessed or built-in.
? Place your Beer Dispenser on a floor that is strong enough to support the Beer Dispenser
when it is fully loaded.
? Allow 3 inches of space between the back and sides of the Beer Dispenser, which allows the
proper air circulation to cool the compressor and condenser.
? Locate the Beer Dispenser away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase
electrical consumption. Extreme cold ambient temperatures may also cause the Beer
Dispenser not to perform properly.
? Avoid locating the Beer Dispenser in moist areas.
? Plug the Beer Dispenser into an exclusive, properly installed-grounded wall outlet. Do not
? 1 Pull Handle (Beer Tower Faucet)
? 1 Metal Wrench
? 4 Plugs (For Guard Rail Holes)
? 1 Metal Plate f or Cabinet Bottom
? 2 Steel Wire Shelves
? 1 Steel Clamp for Red Hose
? 1 Beer Tower Top Plastic Cover
? 1 DVD Instruction
? 4 Castors with Lock
9
under any circumstances cut or remove the third (ground) prong from the power cord. Any
?
Wa
rning
?
questions concerning power and or grounding should be directed toward a certified electrician
or an authorized Avanti Products service center.
? After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before
placing any contents in the Beer Dispenser compartment.
? Electrical Connection
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized Avanti Products service center.
This unit should be properly grounded for your safety. The power cord of this unit is equipped with a
three-prong plug which mates with standard three prong wall outlets to minimize the possibility of
electrical shock.
Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
For personal safety, this appliance must be properly grounded.
This unit requires a standard 115/120 Volt AC ~/60Hz electrical outlet with three -prong ground. Have
the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly
grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation
to have it replaced with a properly grounded 3-prong wall outlet.
The cord should be secured behind the unit and not left exposed or dangling to prevent accidental
injury.
The unit should always be plugged into its own individual electrical outlet which has a voltage rating
that matches the rati ng label on the appliance. This provides the best performance and also prevent
overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the
unit by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle.
Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do
not use a cord that shows cracks or abrasion damage along its length or at either end. When moving
the unit, be careful not to damage the power cord.
? Extension Cord
Because of potential safety hazards under certain conditions, it is strongly recommended that you do
not use an extension cord with this unit. However, if you must use an extension cord it is absolutely
necessary that it be a UL/CUL -Listed, 3-wire grounding type appliance extension cord having a
grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10
amperes.
? Reversing the Door Swing of Your Appliance
This appliance has the capability of the door opening from either the left or right side. The unit is
delivered to you with the door opening from the left side. Should you desire to reverse the opening
direction, please call service for reversal instructions.
10
? Installation Instructions for Beer Dispenser
WARNING
CO2 GAS CAN BE DANGEROUS
WARNING: CO2 cylinders contain high-pressure compressed gas which can be hazardous if not
handled properly. Make sure you READ and UNDERSTAND the following procedures for CO2
cylinders BEFORE INSTALLATION.
1. ALWAYS connect the CO2 cylinder to a regulator. Failure to do so could result in explosion
with possible death or injury when the cylinder valve is opened.
2. NEVER connect the CO2 cylinder directly to the product container.
3. ALWAYS follow correc t procedures when cylinders are changed.
4. ALWAYS secure the cylinder in an upright position.
5. NEVER drop or throw a CO2 cylinder.
6. ALWAYS keep a CO2 cylinder away from heat. Store extra cylinders in a cool place
(preferably 70°F). Securely fasten with a chain in an upright position when storing.
7. ALWAYS ventilate and leave the area immediately if CO2 leakage has occurred.
8. ALWAYS check the D.O.T. test date on the cylinder neck before installation. If over five (5)
years, do not use, return cylinder to gas supplier.
9. NEVER connect a product container unless there are two (2) safety’s in the pressure system:
a. One at or on the CO2 regulator
b. One at or on the product coupler or in the pressure gas line.
Beer Keg Installation Sketch
11
Loading...