Page 1
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
Model Number/ No. de Modelo:
BEVERAGE CENTER
BCA31SS
CAUTION:
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
La sección en español empieza en la página 13.
improvement on its products and reserves the right to change materials and specifications
Avanti Products, A Division of the Mackle Co., Inc.
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com
Page 2
Table of Contents
Beverage center Safety 3
Important Safepuides
Help Us Help You 5
Parts and Features
Important Safety Instructions
Installation Instructions
Before Using Your Beverage center
Installation of Your Beverage center
Electrical Connection
Operating Your Appliance 8
Temperature Control
Care and Maintenance
Reversing the Door of Your Beverage center 9
4
6
7
7
7
7
8
8
9
Defrosting Your Beverage center
Cleaning Your Appliance 9
Maintenance of Your Appliance
Moving Your Beverage center
Energy Saving Tips
Troubleshooting Guide
Service for Your Appliance
Wiring Diagram
Your Avanti Products Warranty
Instrucciones en Español
Registration Information and Registration Card
13-14
9
9
9
9
10
11
11
12
15
Page 3
BEVERAGE CENTER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual for your appliance. Always read
and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that
can kill or injure you and others. All safety messages will ifollow the Safety
Alert Symbol and either the words“ DANGER", “WARNING" or “CAUTION”.
A DANGER A
WARNING A
CAUTION
All safety messages will alert you to know what the potential hazard is, tell you how to reduce the
chance of Injury, and let you know what can happen if the instructions are not followed.
Danger means that failure to heed this
safety statement may result in severe
personal injury or death.
Warning means that failure to heed this
safety statement may result in extensive
product damage, serious personal injury, or
death.
Caution means that failure to heed this
safety statement may result in minor or
moderate personal injury, property or
equipment damage.
Page 4
IMPORTANT SAFEGUIDES
Before the beverage center is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the beverage center, follow basic precautions,
including the following:
A DANGER A
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and
do not use an extension cord.
It Is recommended that a separate circuit, serving only your beverage center be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
Never clean beverage center parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of
this or any other appliance. The fumes can create a fire hazard or explosion.
Before proceeding with cleaning and maintenance operations, make sure the power line of the
unit is disconnected.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the beverage center or disconnect power before cleaning or servicing. Failure to do so
can result in electrical shock or death.
Do not attempt to repair or replace any part of your beverage center unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
A WARNING A
FOLLOW WARNING CALL OUTS BELoW ONLY WHEN APPLICABLE TO YOUR MODEL
Use two or more people to move and install beverage center. Failure to do so can result in back
or other injury.
To ensure proper ventilation for your beverage center, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 60”F (16°C) and below
90"F (32“C). This unit must be installed in an area protected from the elements, such as wind,
rain, water spray or drips.
The beverage center should not be located next to ovens, grills or other sources of high heat.
The beverage center must be installed with ail electrical, water and drain connections in
accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz),
properly grounded In accordance with the National Electrical Code and local codes and
ordinances is required.
Do not kink or pinch the power supply cord of beverage center.
The fuse (or circuit breaker) size should be 15 amperes.
It is important for the beverage center to be leveled in order to work properly. You may need to
make several adjustments to level it.
All installation must be in accordance with local plumbing code requirements.
Make certain that the pipes are not pinched or kinked or damaged during installation.
Check for leaks after connection.
Never allow children to operate, play with or crawl inside the beverage center.
Although the unit has been tested at the factory, due to long-term transit and storage, the first
batch of cubes must be discarded.
Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may
damage or discolor the interior.
Do not use this apparatus for other than its intended purpose.
Page 5
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and maintain
your new appliance properly.
Keep it handy to answer your questions.
If you don’t understand something or your
need more help, please call:
Avanti Customer Service
800-220-5570
Keep proof of original purchase date (such as
your sales slip) with this guide to establish the
warranty period.
CAUTION:
THIS APPLIANCE IS NOT
DESIGNED FOR THE STORAGE
OF MEDICINE OR OTHER
MEDICAL PRODUCTS.
Write down the model and serial numbers.
You'll find them on a plate located on the
inside left wall the appliance.
Please write these numbers here;
Date of Purchase
Model Number
Serial Number
Use these numbers in any correspondence or
service calls concerning your appliance.
If you received a damaged appliance,
immediately contact the dealer (or builder) that
sold you the appliance.
IF YOU NEED SERVICE
We’re proud of our service and want you to be
pleased, if for some reason you are not happy
with the service you receive, here are some
steps to follow for further help.
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In
most cases, this will solve the problem.
Save time and money. Before you call for
service, check the Troubleshooting Guide. It
lists causes of minor operating problems that
you can correct yourself.
NEXT, if you are still not pleased, write all the
details, including your telephone number, and
send to:
Customer Service
Avanti Products
10880 NW30 Street
Miami, FL33172
Page 6
PARTS & FEATURES
1. Temperature Control with Light
2. Large Beverage Shelves (2)
3. Small Beverage Shelf (1)
4. Storage Divider
5. Leveling Leg
6. Upper Door Hinge
7. Glass Door with Stainless Steel Frame
8. Stainless Steel Handle
Page 7
Important Safety Instructions
To reduce the risk of fire, electrical shock,
yWARNINCy
or injury when using your beverage center,
follow these basic precautions:
Read all instructions before using the beverage center.
DANGER or WARNING: Risk of child entrapment.
Before you throw away your old beverage center or freezer: Take off the doors.
Leave the shelves in place so that children may not easily climb’ inside.
Never allow children to operate, play with, or crawl inside the beverage center.
Never clean beverage center parts with flammable fluids. The fumes can create a
fire hazard or explosion. .
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other beverage center. The fumes can create a fire hazard or
explosion.
-Save these instructions-
INSTALLATION INSTRUCTIONS
Before Using Your Beverage center
• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts:
• 2 Large Beverage Shelves
• 1 Small Beverage Shelf
• Instruction manual
• Before connecting the beverage center to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system
from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
.........
^ ;
1 S t a i n l e s s s t e e l H a n d l e A s s e m b l y
Installation of Your Beverage center
• This appliance is designed to be free standing only, and should not be recessed or built-in.
• Place your beverage center on a floorthat is strong enough to support the beverage center
when it is fully loaded. To level your beverage center, adjust the front legs at the bottom of the
beverage center.
• Allow 5 inches of space between the back and sides of the beverage center, which allows the
proper air circulation to cool the compressor.
• Locate the beverage center away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase
electrical consumption. Extreme cold ambient temperatures may also cause the beverage
center not to perform properly.
• Avoid locating the beverage center in moist areas.
• Plug the beverage center into an exclusive, properly installed-grounded wall outlet. Do not
under any circumstances cut or remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be directed toward a certified electrician
or an authorized Avanti Products service center.
• After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before
placing food in the chiller or beverage center compartment.
Page 8
> Electrical Connection
XWarningX
improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized Avanti Products service center.
This beverage center should be properly grounded for your safety. The power cord of this beverage
center is equipped with a three-prong plug which mates with standard three prong wall outlets to
minimize the possibility of electrical shock. .
Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
This beverage center requires a standard 115/120a/c-volt/60Hz electrical outlet with three-prong
ground.
The cord should be secured behind the beverage center and not left exposed or dangling to prevent
accidental injury.
Never unplug the beverage center by pulling the power cord. Always grip the plug firmly and pull
straight out from the receptacle.
Do not use an extension cord with this appliance. If the power cord is too short, have a qualified
electrician or service technician install an outlet near the appliance
OPERATING YOUR BEVERAGE CENTER
Setting the Temperature Control
To control the internal temperature, adjust the control dial according
to the ambient temperature or purpose of use.
The first time you turn the unit on, set the temperature control to “7.
The range of the temperature control is from position "0 to 7.” After
24 to 48 hoursf^adjust the temperature control to the setting that
best suites your needs. The setting of “4" should be correct for
home or office beverage'center use
NOTE:
■ If the unit is unplugged, has lost power, or turned off; you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the beverage center will not
start.
1 .Thermostat
2. Light Switch
3. LED Light
> Interior Light
To use the interior light, switch the light either ON or OFF using the toggle switch located on the
control panel / light panel.
Page 9
CARE AND MAINTENANCE
> Defrosting Your Beverage center
Defrost the beverage center when the frost accumulated on the evaporator is about 5mm (1/5 inch)
thick. Set the thermostat dial to “0" position. Remove frozen or perishable foodS; Defrosting usually
takes a few hours. After defrosting, return the thermostat dial to the desired position. To defrost
quickly remove all foods from the beverage center and leave the door open. Never use a knife or
other metal instrument to scrape ice/frost from the evaporator.
> Reversing the Door Swing of Your Beverage center
This appliance has the capability of the door opening from either the left of right side. The unit is
delivered to you with the door opening from the left side. Should you desire to reverse the opening
direction, please call service for reversal instructions.
> Cleaning Your Beverage center
• Turn the temperature control to "0", unplug the beverage center, and remove the food, shelves,
and trays.
• Wash the Inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves and trays with a mild detergent solution.
• The outside of the beverage center should be cleaned with mild detergent and warm water.
• Wring excess water out of the sponge or cloth before cleaning the area of the controls, or any
electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with
a clean soft cloth.
> Vacation time
• Short vacations: Leave the beverage center operating during vacations of less than three weeks.
• Long vacations: If the appliance will not be used for several months, remove a!! food and unplug
the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave
the door open slightly: blocking it open if necessary.
> Moving Your Beverage center
Remove all the food.
Securely tape down all loose items inside your beverage center.
Turn the leveling screws up to the base to avoid damage.
Tape the door shut.
Be sure the beverage center stays secure in the upright position during transportation. Also
protect the outside of beverage center with a blanket, or similar item.
Energy Saving Tips
The beverage center should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the beverage center. Overloading the
beverage center forces the compressor to run longer.
Be sure to wrap foods properly, and wipe containers dry before placing them in the beverage
center. This cuts down on frost build-up inside the beverage center.
Beverage center storage bin should not be lined with aluminum foil, wax paper, or paper toweling.
Liners interfere with cold air circulation, making the beverage center less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
Page 10
PROBLEMS WITH YOUR BEVERAGE CENTER?
You can solve many common beverage center problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
PROBLEM
Beverage center does not operate.
Turns on and off frequently.
Vibrations.
The beverage center seems to make too much
noise.
The door will not close properly.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The room temperature is hotter than normal,
A large amount of food has been added to the
beverage center.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The beverage center does not have the correct
clearances.
Check to assure that the beverage center is level. ‘
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in your
beverage center.
Contraction and expansion of the inside walls
may cause popping and crackling noises.
The beverage center is not level.
The beverage center is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves, bins, or baskets are out of position.
POSSIBLE CAUSE
10
Page 11
SERVICE FOR YOUR BEVERAGE CENTER
We are proud of our customer service organization and the network of professional service
technicians that provide service on your Avanti beverage centers. With the purchase of your Avanti
beverage center, you can have the confidence that if you ever need additional information or
assistance, the Avanti Products Customer Service Team will be here for you. Just call us toll-free.
AVANTI PRODUCTS CUSTOMER SERVICES
Product Information
800-323-5029
Part Orders
800-220-5570
In-Home Repair Service
800-220-5570
Whatever your questions are about our products,
help is available.
You may order parts and accessories that will be
delivered directly to your h6me personal
check, money order, Master Card, or Visa.
An Avanti Products authorized service center will
provide expert repair service, scheduled at a time
that is convenient for you. Our trained servicers
know your beverage center inside and out.
WIRING DIAGRAM
THERMOSTAT
11
Page 12
YOUR Avanti Products WARRANTY
WHAT IS COVERED
LIlVliTED ONE-YEAR
WARRANTY
For one year from the date of
purchase by the original owner, Avanti
Products will, at its option, repair or
replace any part of the beverage
center, which proves to be defective in
material or workmanship under normal
use. During this period Avanti
Products will provide all parts and
labor necessary to r correct such
defects free of charge, so long as the
beverage center has been installed
and operated in accordance with the
written instructions in this manual. In
rental or commercial use, the warranty
period is 90 days. Avanti Products will
provide you with a reasonably similar
replacement product that is either new
or factory refurbished. All Avanti
Appliances of 3.5 cubic foot capacity
or less must be brought/sent to the
appliance service shop for repair.
Staple your sales receipt here. Proof of
original purchase date is needed to obtain
service under warranty.
LIMITED SECOND THROUGH
FIFTH YEAR WARRANTY
For the second through the fifth year from date
of original purchase, Avanti Products will
provide a replacement compressor free of
charge due to a failure. You are responsible
for the service labor and freight charges. In
rental or commercial use, the limited
compressor warranty is one year and nine
months. Cost to move the beverage center to
the servicers’ shop and back to the user's
home, as may be required, are the user's
responsibility.
WHAT IS NOT COVERED
Content losses of food due to spoilage,
incidental or consequential damages.
Parts and labor costs for the following will
not be considered as warranty:
Evaporator doors, door springs, and/or
frames.
Inner door panels, door shelves, door rails,
and/or door supports.
Light bulbs and/or plastic housing.
Plastic cabinet liners.
Punctured evaporator that voids the
warranty on the complete sealed system.
Repairs performed by unauthorized
servicers.
Shipping and handling costs associated
with the replacement of the unit.
Service calls that do not involve defects in
material or workmanship such as
customer education, door reversal, or
proper installation.
Service calls that are related to external
problems, such as abuse, misuse,
inadequate electrical power, accidents, fire,
floods, or acts of God.
Surcharges including, but not limited to,
any after hour, weekend, or holiday
service calls, tolls, ferry trip charges, or
mileage expense for service calls to
remote areas, including the State of
Alaska.
Replacement of house fuses or resetting
circuit breakers.
Failure of the product if it is used for other
than its intended purpose.
This warranty does not apply outside the
Continental USA.
12
Page 13
INSTRUCCIONES EN ESPAÑOL
> INSTALACION
Retire los accesorios de empaque (plásticos protectores, cartón y tiras engomadas). Limpie el
exterior con un trapo suave y seco, y el interior con un trapo húmedo y tibio.
> UBICACION
1. Seleccione un lugar con un piso firme y nivelado.
2. Su refrigerador requiere ventilación. Deje un espacio mínimo de 5" hacia arriba y espacio
suficiente en el respaldo para permitir la circulación de aire.
3. Evite luz directa del sol o calor. La luz directa del sol puede afectar la capa de pintura. Las
fuentes de calor en su proximidad causarán un consumo mayor de electricidad.
4. Para un mejor desempeño, nivele el refrigerador utilizando las patas ajustables o tornillos
niveladores. Para verificar el nivel, abra la puerta hasta la mitad, debe regresar sola.
> INSTRUCCIONES PARA LA CONEXION A TIERRA
Este aparato electrodoméstico debe estar conectado a tierra. En caso de un cortocircuito eléctrico, la
conexión a tierra reduce el riesgo de choque eléctrico proporcionando un cable de escape para la
corriente eléctrica. Este aparato viene equipado con un cordón que posee un cable a tierra con un
enchufe de conexión a tierra. Este enchufe debe estar conectado en un tomacorriente instalado
correctamente y conectado a tierra.
> ADVERTENCIA
El uso inadecuado del enchufe de conexión a tierra puede resultar en un riesgo de choque eléctrico.
Consulte con un electricista si no comprende bien las instrucciones de conexión a tierra o si existe
alguna duda sobre si el aparato está conectado a tierra correctamente.
> NO USE UN CORDON DE EXTENSION ELECTRICA
Use un tomacorriente de pared exclusivo. No conecte su refrigerador a cordones de prolongación
eléctrica o junto a cualquier otro electrodoméstico en el mismo tomacorriente de pared.
> ADVERTENCIA IMPORTANTE:
Un refrigerador vacío es una atracción muy peligrosa para los niños. Quite los sellos magnéticos,
puertas o cerraduras de todo electrodoméstico que esté en uso.
> OPERACION
Enchufe el cable a la toma de corriente, que debe ser 115-120v A/C, 10 AMP ó más.
Para evitar vibraciones, la caja debe estar bien nivelada. Su unidad tiene un solo control para regular
la temperatura, este control se encuentra localizado en la parte superior derecha del compartimiento.
Al conectar y encender su unidad, asegúrese de rotar el control de temperatura hacia la posición “7".
Este control de temperatura puede variar desde “0” hasta la posición “7", después de haberse
mantenido en la posición “7” por 24 o 48 horas aproximadamente, regrese el control de temperatura
para ajustarlo a la posición que más se ajuste a sus necesidades. Por ejemplo la posición “4" sería
apropiada para usar su unidad en su hogar u oficina.
Para apagar su unidad, simplemente rote el control de temperatura hacia la posición “0".
Nota;
Rotando el control de temperatura hacia la posición “0", Usted solamente apaga el ciclo de
enfriamiento, pero no desconecta su unidad de la fuente de corriente.
Si la unidad es desconectada de la pared o sufre una interrupción de electricidad Usted siempre debe
esperar por un aproximado de 3 a 5 minutos para poder encenderla de nuevo, de no hacerlo así, su
unidad no comenzará a funcionar.
> COMO DESCONGELAR
Coloque el dial del termostato en “0" (apagado). Quite todos los alimentos congelados ya que se
puedan echar a perder. El descongelado generalmente tarda pocas horas. Para descongelar rápido
13
Page 14
quite todos los alimentos del refrigerador y deje la puerta abierta. Nunca use un cuchillo u otro
instrumento metálico para rascar el hielo o la escarcha de! congelador. Luego de descongelar,
vacíe el agua de la bandeja de goteo y vuelva a colocar el dial del termostato en la posición deseada.
> CUIDADOS EN LOS PERIODOS DE AUSENCIA
• Para cortos períodos de ausencia (menos de 21 días) el congelador podrá quedar
funcionando. Coloque el botón de control de temperaturas en la posición “0”.
• En períodos de ausencia más largos, se aconseja dejar el refrigerador limpio y desconectado.
• Saque todo lo que tenga adentro del refrigerador y haga el deshielo y la limpieza general.
También retire ¡as cubeteras, limpie bien y séquelas internamente.
• Deje la puerta entreabierta para que penetre el aire y así evitar la formación de olores.
> ECONOMIA DE ENERGIA
• Evite dejar por mucho tiempo la puerta abierta.
• Evite aperturas frecuentes de la puerta.
• Nunca coloque alimentos calientes dentro del refrigerador. Espere que estén a una
temperatura ambiental.
• Coloque el botón de control de temperaturas en la posición adecuada.
> SI USTED SE VA DE VACACIONES
• Saque todos los artículos del refrigerador-congelador si Ud. se va de vacaciones por un mes
o más.
• Desconecte el refrigerador del tomacorriente y limpie el refrigerador bien, incluyendo la
bandeja del congelador.
• Deje la puerta abierta para evitar la formación de olores, condensación o moho.
> SI USTED SE MUDA
• Desconecte el refrigerador del tomacorriente y limpie el refrigerador bien, incluyendo la
bandeja del congelador,
• Saque todas las partes movibles y empaquételas para que no se muevan durante la
transportación.
• Cierre la puerta del refrigerador y séllela con cinta adhesiva.
• Asegúrese que el refrigerador va parado durante el viaje y cúbralo con una frazada.
COMO CAMBIAR LA D|RECCION DE APERTURA DE LA PUERTA
En caso de que necesite cambiar el lado de apertura de la puerta, por favor consulte a! servicio pos
venta de su localidad o al empleado que le vendió la unidad.
14
Page 15
Registration Information
Thank you for purchasing this fine Avanti product. Please fill out this card and return it within 100
days of purchase and receive these important benefits:
> Protect your product:
We will keep the model number and date of purchase of your new Avanti product on file to
help you refer to this information in the event of an insurance claim such as fire or theft.
> Promote better products;
We value your input. Your responses will help us develop products designed to best meet
your future needs.
Avanti Registration Card /
Name
Address
City
Area Code Phone Number
Did You Purchase An Additional Warranty:
□Extended LlFood Loss DNone
Reason For Choosing This Avanti Product:
Please indicate the most important factors
that influenced your decision to purchase
this product.
□Price
□Product Features
□Avanti Reputation
□Product Quality
□Salesperson Recommendation
□Friend/Relative Recommendation
□Warranty
□Other
__________ •___________
State
Zip
Model #
Date Purchased
Occupation
As Your Primary Residence, Do You:
□Own ORent
Your Age:
□under 18 D18-25 D26-30
□31-35 G36-50 Dover 50
Marital Status:
□Married GSingle
Is This Product Used In The:
□Home DBusiness
How Did You Learn About This Product:
□Advertising
□In Store Demo
□Other
________
Comments
Serial #
Store/Dealer Name
□Product Features
□Personal Demo
15
Loading...